Professional Documents
Culture Documents
!
in remote control is blinking green),
follow this procedure for linking:
[2]Disconnect the batterie.
[3]Wait for 30 seconds.
[4]Reconnect the batterie.
[5]Press a button on the remote control.
[6]If the light on the remote control becomes
solid green, the remotes are linked{A}.
If the light on the remote control does not
stop blinking after 3 seconds{B} and the
light on the receiver board is also blinking{C},
it is necessary to change the dipswitch
setting to another channel. The reason
might be that an interfering signal is
close to the remotes.
For changing of channels, see picture 8
30 sec 1 of 4
2 3 4
BLINKING GREEN C
VERT CLIGNOTANT
3s
sec ec
3
A SOLID GREEN
VERT SOLIDE
B BLINKING GREEN
VERT CLIGNOTANT
5 6
1100 ELEGANCE/ALLIANCE CLASSIC
CHANGING CHANNELS
A
2 C
1 <50 m
4 POSSIBLE POSITIONS
B
A C
B
8 9
11 2 of 3
!
[13]Problem: the remotes don't function;
blinking GREEN they are showing a blinking green light.
[14]Cause 1: the remote can be too far
away from the lift.
>50 m
[15]Cause 2: possibly the dipswitch set-
tings on the remote is not the same as
the dipswitch setting on the board{A}.
13 14 Solution: change the dipswitch settings:
see illustration 8{B}.
B
A
16 17
EN Projectnr...................................... *11P00394*
11 P 0 0 3 9 4 _rev.L
2 Rail
4 Clearance dimensions
1) Confirm the safety distances to obstacles are respected
2) Confirm that there are no open bannisters
5 Mechanical tests
[1.1 x max.load]
10) Confirm that other users can safely use the stairs
(instal support brackets if necessary)
11) Confirm that the stairs can withstand 100 N/cm2
12) Confirm all torque settings have been applied
6 Electrical tests
a)
b)
c)
7 Declaration engineer
I/We certify that on .................I/we thoroughly examinated this lift and that the foregoing is a correct
report of the result.
I/We declare that the erected stairlift is compound with approved components and installed according
to the instructions in the installation manual. I/We also declare that I/we have instructed the user by
telling him/her all users practice. The user is independently able to use the lift safely without further
instruction.The user manual has been handed over to the user.
Name Engineer: ................................................................. Name Engineer: .................................................................
Qualifications: ................................................................. Qualifications: .................................................................
Signing date: ................................................................. Signing date: .................................................................