Professional Documents
Culture Documents
com
Please contact:
Thomas Bai 2020
AMPCO Minerals,Inc. all rights reserved
+86 15801697955
thomas.bai@ampcominerals.com.cn
Company Profile
With staff, manufacturing and warehousing distributed over USA,
China, Australia and Europe, AMPCO offers a balanced mix of
western mindset and eastern value. Through our portfolio of
crushing and screening equipment being one of the broadest
available from a single manufacturer we are able to offer
complete crushing and screening plant solutions, as well as a
range of service offerings.
Feeders
Grizzly Feeder
Pan Feeder
Apron Feeder
Crushing Equipment
Jaw Crusher
Cone Crusher
Vertical Shaft Impact Crusher
Horizontal Shaft Impact Crusher
Screening Equipment
Horizontal Vibrating Screen
www.ampcominerals.com Inclined Vibrating Screen
Washing Equipment
Coarse Material Washer
Fine Material Washer
Log Washer
Magnetic Separators
Metal Magnetic Separator
* All technical data in this guide is for reference only. For more information, please consult your local AMPCO expert.
Permanent Magnetic Separator
Conveyors
www.ampcominerals.com
Reliability
■ Optimized hopper, high-strength feeder
body
■ Reliability analysis of the parts and
components
■ Fatigue strength analysis using
computerised simulations
High output
■ High material handling capacity
■ Smooth screening of bulk materials
High performance
■ Adaption to different feeding methods
■ Low feed height
■ Suitable for a wide range of materials
High efficiency
■ Safe operability is at the foundation of
the design
Characteristics of Feeders Product Series ■ Easy to install and repair
■ Easy to operate
Design Features
■ Wholly welded and stress relieved
structure GF Series Grizzly Feeder
■ Adjustable spacing between grizzly
bars
■ Single and double grizzly bar AMPCO Grizzly Feeders are used in mining, aggregates
design options and recycling applications and are suitable for continuous
■ Stepless speed regulation to processing of a wide variety of raw materials, hard as well as
control feed rate abrasive. The ideal equipment for pre-screening applications
■ Frame designed according to prior to primary crushing. It has a solid and robust frame with a
conservative finite element analysis high feed capacity. It is equipped with a pair of eccentric shafts
techniques on large bearings that provides amplitude and vibration angle
■ Gear set lubricated through oil tank and an extraordinary long service life. It is very easy to operate
and designed with a special sealing and maintain.
arrangement
Product Features
■ Suitable for the demands of
different working conditions
■ Screening efficiency of over 75%
Maximum Motor
Wx L Stroke Speed Weight Capacity
Model Deck Feed Size Power
Inch × ft mm × mm Inch mm mm rpm hp kW Ibs kg stph mtph
GF4012 1 40"×12′ 1,000×3,660 24" 600 10 500-800 20 15 7,826 3,550 500 450
GF4016 1 40"×16′ 1,000×4,875 24" 600 10 500-800 25 18.5 10,692 4,850 550 500
GF4616 1 46"×16′ 1,124×4,875 28" 700 10 500-800 25 18.5 11,243 5,100 605 550
GF4620 1or2 46"×20′ 1,124×6,070 28" 700 10 500-800 30 22 13,536 6,410 605 550
GF5217 1 52"×17′ 1,300×5,105 32" 800 11 500-800 40 30 14,219 6,450 683 620
GF5220 1or2 52"×20′ 1,300×6,070 32" 800 11 500-800 40 30 16,424 7,450 683 620
GF5224 1or2 52"×24′ 1,300×7,320 32" 800 11 500-800 50 37 20,944 9,500 683 620
GF5820 1or2 58"×20′ 1,470×6,070 36" 900 11 500-800 50 37 18,739 8,500 770 700
GF6420 1or2 64"×20′ 1,630×6,100 44" 1,100 11 500-800 60 45 22,266 10,100 904 820
GF6424 1or2 64"×24′ 1,630×7,320 44" 1,100 11 500-800 60 45 24,581 11,150 904 820
GF7220 1or2 72"×20′ 1,830x6,070 50" 1,300 12 500-800 75 55 25,904 11,750 1,378 1,250
GF7224 1or2 72"×24′ 1,830x7,320 50" 1,300 12 500-800 100 75 30,864 14,000 1,378 1,250
A C
A B C D
Model
Inch mm Inch mm Inch mm Inch mm
GF4012 147" 3,740 34" 850 66" 1,700 40" 1,040
GF4016 195" 4,955 34" 850 66" 1,700 40" 1,040
GF4616 195" 4,955 38" 970 72" 1,824 46" 1,164
GF4620 242" 6,150 40" 1,000 72" 1,824 46" 1,164
GF5217 204" 5,185 40" 1,010 78" 2,000 52" 1,340
GF5220 242" 6,150 40" 1,010 78" 2,000 52" 1,340
GF5224 291" 7,400 40" 1,010 78" 2,000 52" 1,340
GF5820 242" 6,150 40" 1,010 85" 2,160 60" 1,510
GF5824 291" 7,400 40" 1,010 85" 2,160 60" 1,510
GF6420 242" 6,150 42" 1,060 90" 2,280 66" 1,670
GF6424 291" 7,400 42" 1,060 90" 2,280 66" 1,670
GF7220 242" 6,150 46" 1,180 100" 2,548 74" 1,870
GF7224 291" 7,400 46" 1,180 100" 2,548 74" 1,870
PF Series Pan Feeder
Design Features
■ Wholly welded and stress relieved AMPCO Pan Feeders are normally used for secondary/
structure tertiary feeding in mining, quarrying and recycling operations.
■ Suspended or floor-mounted It is a popular product for feeding from stockpiles, silos or bins,
installation buffering the impact of feeding from primary crushers or the
■ Adjustable inclination for different
main feed conveyor system. The feeder is driven by unbalanced
applications
electrical motors, it has a compact structure and easy to install.
Product Features
■ High-strength and robust feeder
feed rate
■ Suitable for different installation
requirements
Maximum Feed
Wx L Speed Motor Power Weight Capacity
Size
Model
rpm
Inch × Inch mm × mm Inch mm hp kW lbs kg stph mtph
50HZ 60HZ
PF30 30"×59" 760×1,500 11" 280 980 1,176 1×2 0.75×2 1,543 700 265 240
PF36 36"×71" 910×1,800 12" 300 980 1,176 2×2 1.5×2 2,094 950 397 360
PF48 48"×71" 1,220×1,800 14" 350 980 1,176 3×2 2.2×2 3,351 1,520 529 480
PF60 59"×71" 1,500×1,800 14" 350 980 1,176 3×2 2.2×2 3,924 1,780 661 600
AF Series Apron Feeder
Design Features
■ Tough plate made from cold drawn
alloy steel; high strength and impact
resistant
■ Torque arm structure with reducer
AMPCO apron feeders are suitable for a wide range of ■ Hydraulic tensioning device, heavy
applications and are commonly seen in mining, but also wear-resistant tail wheel
construction and other industrial applications. They can handle ■ Standard pitch drive chain
dry, wet, and sticky materials and are available in a wide range ■ Alloy steel forged main shaft and
of sizes to meet specific user requirements. drive gear block with easy to replace
parts and shaft connected by
expansion sleeve
Product Features
■ Applied to high viscosity and high
density materials
■ High capacity and low spillage
■ Low maintenance
■ Easy to maintain
forgings
■ Product quality control throughout the
proces
High output
■ Excellent material throughput, high
crushing capacity
High performance
■ High installed power to crushing force
utilization ratio
■ A variety of wear parts available for
conditions
High efficiency
■ Safe operability is at the foundation of
the design
Characteristics of Crushing Product Series ■ Easy to install and repair
■ Easy to operate
Product Features
■ Large throughput and stable
operation
■ Bolted frame - long service life,
and safe
■ Long service lifetime of bearings
A
B
D
C
G
A B C D E F G
Model
Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
J35 74.8" 1,900 49" 1,250 110" 2,800 51" 1,300 74.8" 1,900 50.3" 1,280 40.9" 1,040
J40 96.4" 2,450 59" 1,500 128" 3,260 57" 1,450 75.6" 1,920 57" 1,450 42.5" 1,080
J45 110.2" 2,800 73.6" 1,870 144" 3,670 67" 1,705 90.6" 2,300 57" 1,450 50.3" 1,280
J50 135.8" 3,450 92.5" 2,350 179.5" 4,560 92.5" 2,350 110" 2,800 70.8" 1,800 61" 1,550
J55 149.6" 3,800 100.8" 2,560 192.9" 4,900 100" 2,540 120.9" 3,070 73.6" 1,870 64.6" 1,640
J65 165.7" 4,210 109" 2,770 219.7" 5,580 107.9" 2,740 137.8" 3,500 85" 2,160 74.4" 1,890
J80 209.4" 5,320 138.5" 3,520 300" 7,620 143.8" 3,655 160.6" 4,080 110" 2,800 91.3" 2,320
J3355 120" 3,050 77.2" 1,960 155.9" 3,960 74" 1,880 105.9" 2,690 69.4" 1,765 62.2" 1,580
J2055 88.5" 2,250 51.1" 1,300 122" 3,100 57" 1,450 94.4" 2400 53.1" 1,350 63.7" 1,620
J2842 94" 2,390 61.4" 1,560 129.9" 3,300 63.3" 1,610 81.8" 2080 53.5" 1,360 48" 1,220
J3448 124" 3,150 80.7" 2,050 161.4" 4,100 80.7" 2,050 100.3" 2550 64.9" 1,650 58.2" 1,480
J3055 101.5 2,580 68.5" 1,740 152.7" 3,880 73.2" 1,860 104.3" 2650 65.3" 1,660 61.4" 1,560
C Series Cone Crusher
Product Features
■ Rigid & durable crusher body
suitable for the most demanding
duties
■ Automatic tramp release protection
setting
■ Optimized cavity design for each
application
■ Available for fully automatic
CM Series Cone Crusher
remote- and centralized-controls
Technical Parameter Table
Model C35 C40 C45 C50 C55 C65 CM75 CM80 CM90
Technical Specification
Nominal
Diameter of Inch 35" 40" 45" 50" 57" 65" 75" 82" 92"
the Body
Motor kW 132-160 220-250 315 355-400 450 500-560 560-630 630-710 800-1,000
Power hp 150-200 300-350 450 450-500 600 700-750 750-850 850-950 1,100-1,350
kg 11,000 14,500 21,500 28,500 38,500 56,000 90,000 132,000 163,000
Weight
lbs 24,250 31,967 47,399 62,831 84,877 123,459 198,417 291,011 359,355
Theoretical Throughput
10 mm 85-125 100-150 150-210 180-250 220-300
13 mm 110-150 130-190 190-270 220-320 280-380 310-420 400-520 510-680 650-900
16 mm 140-180 160-230 230-330 270-370 330-450 350-480 450-630 550-750 700-1,000
20 mm 150-190 175-250 260-350 300-410 370-500 400-530 500-660 600-800 800-1,100
25 mm 170-220 200-280 300-400 350-460 430-580 460-660 600-900 760-1,100 950-1,500
32 mm 190-235 210-310 330-450 380-500 440-640 500-730 700-1,000 940-1,250 1,200-1,800
38 mm 210-250 240-360 360-500 420-550 510-720 560-840 800-1,200 1,150-1,560 1,400-2,100
45 mm 240-300 280-400 400-560 460-600 570-800 630-930 930-1,350 1,300-1,780 1,600-2,600
51 mm 300-450 430-600 490-650 620-850 680-1,000 1,050-1,500 1,500-2,300 1,900-3,000
A B
A B C D
Model
Inch mm Inch mm Inch mm Inch mm
C35 90.5" 2,300 70.8" 1,800 17.7" 450 64.9" 1,650
C40 102.3" 2,600 74.8" 1,900 19.6" 500 70.8" 1,800
C45 114" 2,900 88.5" 2,250 20" 510 78.7" 2,000
C50 122" 3,100 90.5" 2,300 22.4" 570 101.9" 2,590
C55 137" 3,480 106.2" 2,700 22.8" 580 106.2" 2,700
C65 152.7" 3,880 116" 2,950 25.5" 650 114.9" 2,920
CM75 177" 4,500 141.7" 3,600 27.5" 700 135.8" 3,450
CM80 190.9" 4,850 165.3" 4,200 33.4" 850 153.5" 3,900
CM90 201.5" 5,120 188.9" 4,800 37.4" 950 166" 4,220
V Series
Vertical Shaft Impact Crusher
AMPCO Vertical Shaft Impact (VSI) Crushers are suitable for
tertiary and quaternary crushing duties. Capable of processing
Design Features highly abrasive materials and producing aggregates of excellent
■ Cavities of rock-on-rock, rock-on- cubical shape, they are popular for cubisizing/ shaping of
iron, and iron-on-iron aggregates and manufactured sand.
■ Hydraulic lifting cylinders for ease
Product Features
■ Suitable for a wide range of
applications
■ Easy access to internal parts for
components
■ Greatly reduced dust emissions
A B
A B C D
Model
Inch mm Inch mm Inch mm Inch mm
manganese steel
■ Hydraulically-assisted frame
Product Features
■ Secondary and tertiary crushing
chambers are available, suitable for
different working conditions
■ Featuring easy to install plate
maintain
■ Quick and safe adjustment of
discharge port
Technical Parameter Table
HS55 HS65 HS85
Model HP55 HP65 HP85 HS35 HR35 HR55 HR65
HS55G HS65G HS85G
Rotor Size mm 1,200×1,400 1,400×1,650 1,600x2,130 1,000x900 1,100x1,400 1,300x1,650 1,400x2,100 1,000x900 1,100x1,400 1,300x1,650
DxW Inch 48"×55" 55"×65" 63"×84" 39"×36" 43"×55" 51"×65" 55"×83" 39"×36" 43"×55" 51"×65"
Maximum mm 600 800 1000 400 450 500 600 500 600 800
Feed Size Inch 23.6" 31.5" 39.4" 15.7" 17.7" 19.7" 23.6" 19.7" 23.6" 31.5"
Feed mm 800x1,450 1,150x1,570 1,600x2,150 650x950 700x1,450 750x1,700 850x2,150 700x950 800x1,450 900x1,700
Opening
HxW Inch 31"×57" 45"×62" 63"×85" 26"×37" 28"×57" 30"×67" 33"×85" 27"×37" 31"×57" 35"×67"
mtph 250-350 355-500 700-900 80-150 150-250 250-440 300-500 80-150 150-200 200-300
Capacity
stph 275-385 390-550 770-990 90-165 165-275 275-484 330-550 90-165 165-220 220-330
Motor kW 160-250 315-350 500-700 90-110 132-185 200-350 400-560 90-110 132-185 200-315
Power hp 200-350 400-500 700-950 120-150 150-250 250-500 550-750 120-150 150-250 250-400
12,500 23,800 33,000
kg 15,000 26,000 42,000 9,500 10,500 13,000 25,800
13,500 25,000 35,000
Weight
27,558 52,470 72,753
lbs 33,076 57,332 92,613 20,948 23,153 28,666 56,891
29,768 55,127 77,178
A
B
C D
A B C D
Model
Inch mm Inch mm Inch mm Inch mm
HP55 100" 2,550 96" 2,450 118" 3,000 96" 2,450
Convenient Maintenance
■ Large head space between screen
maintenance
High Performance
■ Stroke length, frequency and direction
■ Horizontal installation
handling G-forces up to 6G
Product Features
■ Flexibility for different product
requirements
■ Optimized performance with
minimum blinding
■ Stable and reliable operation,
G
A
D
C
I
H
F
B
E
SH5163/SHFS5163 223.4″ 5,675 188.9″ 4,800 192.9″ 4,900 25.5″ 650 118.3″ 3,005 76″ 1,935 62.2″ 1,580 83.4″ 2,120 61.4″ 1,560
SH6162/SHFS6162 223.4″ 5,675 188.9″ 4,800 192.9″ 4,900 25.5″ 650 131.8″ 3,350 89.7″ 2,280 75.7″ 1,925 56″ 1,425 45.4″ 1,155
SH6163/SHFS6163 223.4″ 5,675 188.9″ 4,800 192.9″ 4,900 25.5″ 650 131.8″ 3,350 89.7″ 2,280 75.7″ 1,925 83.4″ 2,120 61.4″ 1,560
SH6202/SHFS6202 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 131.8″ 3,350 89.7″ 2,280 75.7″ 1,925 56″ 1,425 45.4″ 1,155
SH6203/SHFS6203 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 131.8″ 3,350 89.7″ 2,280 75.7″ 1,925 83.4″ 2,120 61.4″ 1,560
SH6204/SHFS6204 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 131.8″ 3,350 89.7″ 2,280 75.7″ 1,925 96.8″ 2,460 86.2″ 2,190
SH7202/SHFS7202 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 144.8″ 3,680 102.5″ 2,605 88.5″ 2,250 61.8″ 1,570 49.8″ 1,265
SH7203/SHFS7203 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 144.8″ 3,680 102.5″ 2,605 88.5″ 2,250 80.5″ 2,045 69.8″ 1,775
SH7204/SHFS7204 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 144.8″ 3,680 102.5″ 2,605 88.5″ 2,250 96.8″ 2,460 86.2″ 2,190
SH8202/SHFS8202 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 156.6″ 3,980 114.3″ 2,905 100.3″ 2,550 60.4″ 1,535 49.8″ 1,265
SH8203/SHFS8203 270.6″ 6,875 236.2″ 6,000 240″ 6,100 25.5″ 650 156.6″ 3,980 114.3″ 2,905 100.3″ 2,550 80.5″ 2,045 69.8″ 1,775
SI Series
Cricular Vibrating Screen
The AMPCO Inclined Vibrating Screen (SI) can be used
for screening of all types of materials and is suitable for most
Design Features
installations, whether fixed, modular, portable or mobile. It is used
■ Available in multi-deck
across many different industrial sectors such as aggregate, mining
configurations
■ Screening media in either rubber, and recycling and is common in final screening of aggregates, for
polyurethane or steel coal preparation, metallic ore concentration etc.
■ Adjustable: stroke and stroke
frequency
■ A combination of eccentric block
Product Features
■ Flexibility for different product
requirements and varying working
conditions
■ Optimized performance with
minimum blinding
■ Stable and reliable operation,
F
G
H
B
D
A C
A B C D E F G H
Model
inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm
SI5162 208.5″ 5,296 112.8″ 2,866 110.6″ 2,811 80.9″ 2,056 62.9″ 1,600 131.4″ 3,340 41″ 1,043 58.2″ 1,480
SI5163 208.5″ 5,296 112.8″ 2,866 110.6″ 2,811 80.9″ 2,056 62.9″ 1,600 151.5″ 3,850 41″ 1,043 77″ 1,958
SI6162 208.5″ 5,296 112.8″ 2,866 124″ 3,152 92.5″ 2,350 74.4″ 1,890 131.4″ 3,340 41″ 1,043 58.2″ 1,480
SI6163 208.5″ 5,296 112.8″ 2,866 124″ 3,152 92.5″ 2,350 74.4″ 1,890 151.5″ 3,850 41″ 1,043 77″ 1,958
SI6202 253″ 6,431 157.9″ 4,012 124″ 3,152 92.5″ 2,350 74.4″ 1,890 149.6″ 3,800 57.4″ 1,460 58.2″ 1,480
SI6203 253″ 6,431 157.9″ 4,012 124″ 3,152 92.5″ 2,350 74.4″ 1,890 167.3″ 4,250 57.4″ 1,460 77″ 1,958
SI7202 253″ 6,436 157.9″ 4,012 137.3″ 3,488 104.5″ 2,656 86″ 2,190 164.9″ 4,190 57.4″ 1,460 75.1″ 1,910
SI7203 253″ 6,436 157.9″ 4,012 137.3″ 3,488 104.5″ 2,656 86″ 2,190 187.4″ 4,760 57.4″ 1,460 98.4″ 2,500
SI8202 255″ 6,482 157.9″ 4,012 149.6″ 3,800 116.5″ 2,960 98.4″ 2,500 159.4″ 4,050 57.4″ 1,460 75.1″ 1,910
SI8203 255″ 6,482 157.9″ 4,012 149.6″ 3,800 116.5″ 2,960 98.4″ 2,500 188.3″ 4,785 57.4″ 1,460 98.8″ 2,512
SI8204 253″ 6,436 167.7″ 4,260 149.6″ 3,800 116.5″ 2,960 98.4″ 2,500 218.5″ 5,550 61.8″ 1,570 124.8″ 3,170
SI8242 298.4″ 7,580 180.3″ 4,580 153.5″ 3,900 116.5″ 2,960 98.4″ 2,500 175.9″ 4,470 66.1″ 1,680 75.1″ 1,910
SI8243 298.4″ 7,580 180.3″ 4,580 153.5″ 3,900 116.5″ 2,960 98.4″ 2,500 207.4″ 5,270 66.1″ 1,680 101.5″ 2,580
SI9242 298.4″ 7,580 180.3″ 4,580 166.1″ 4,220 129.1″ 3,280 110.6″ 2,810 175.9″ 4,470 66.9″ 1,700 76.7″ 1,950
SI9243 298.4″ 7,580 180.3″ 4,580 166.1″ 4,220 129.1″ 3,280 110.6″ 2,810 207.4″ 5,270 66.9″ 1,700 101.5″ 2,580
SI10242 301″ 7,650 181.8″ 4,620 179.1″ 4,550 144.8″ 3,680 122.8″ 3,120 176.7″ 4,490 66.9″ 1,700 76.7″ 1,950
SI10243 301″ 7,650 181.8″ 4,620 179.1″ 4,550 144.8″ 3,680 122.8″ 3,120 208.6″ 5,300 66.9″ 1,700 102.3″ 2,600
SISP Series
Circular Vibrating Coarse Screen
Design Features AMPCO Circular motion Inclined Vibrating Screens (SISP) are
used for screening of all types of coarse materials and are suitable
■ Available in multi-deck
for installing in screening applications after primary crushing thanks
configurations
■ Screening media in either rubber, to its rugged design, allowing for feed sizes up to 400 mm. Its upper
polyurethane or steel and middle screen decks can be equipped with screen panels
■ Adjustable stroke and stroke
either in high-strength wear-resistant steel plate, or in polyurethane.
frequency Thanks to its solid and robust structure, designed with high
■ Acombination of eccentric block
and eccentric shaft availability and ease of maintenance in mind, it is a very popular
■ Newly-engineered exciter with choice for heavy-duty coarse screening applications in metallic ores
Rosta springs, supports and stoppers and aggregates.
■ Premium craftsmanship screenbox
Product Features
■ Flexibility for varying working
conditions, capable of handling large
materials
■ Optimized performance with
minimum blinding
■ Stable and reliable operation,
excitation motion
Technical Parameter Table
F
G
H
B
A D
C
A B C D E F G H
Model
inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm
SISP5162 206.6" 5,250 127.9" 3,250 112.2" 2,850 80.7" 2,050 62.2" 1,580 127.9" 3,250 34.6" 880 65.3" 1,660
SISP6162 206.6" 5,250 127.9" 3,250 125.1" 3,180 92.5" 2,350 74.8" 1,900 127.9" 3,250 30.7" 780 65.3" 1,660
SISP7202 248" 6,300 163.7" 4,160 138.5" 3,520 104.7" 2,660 86.2" 2,190 146.4" 3,720 44" 1,120 71.6" 1,820
SISP8202 248" 6,300 163.7" 4,160 155.9" 3,960 117" 2,972 98.5" 2,502 146.4" 3,720 44" 1,120 71.6" 1,820
SISP8242 286.2" 7,270 180.5" 4,586 155.9" 3,960 117" 2,972 98.5" 2,502 169.2" 4,300 48" 1,220 84.6" 2,150
SISP8243 286.2" 7,270 180.5" 4,586 155.9" 3,960 117" 2,972 98.5" 2,502 194.8" 4,950 48.3" 1,229 112.2" 2,850
www.ampcominerals.com
Reliability
■ Spiral blade shafts
■ Special sealing for underwater tail
shaft
■ High torque reducer
High Capacity
■ Different rotation speeds to optimize
washing efficiency
High efficiency
■ Easy to install and repair
■ Safe operation
■ Specially-designed layout
operation.
arrangement of vanes
■ Optional alternative rotational
Product Features
■ High strength body and long
service life
■ Capable of operating long time in
protection
■ Improved cleaning results
CW4420 44" 1,115 240" 6,100 200-250 180-225 3" 75 40 30 114-170 26 18,584 8,380
CW3618D 36"×2 2×915x2 215" 5,462 315-350 285-315 2" 63 30×2 22×2 159-207 32 22,013 9,985
CW4420D 44"×2 1,115×2 240" 6,100 400-495 360-450 3" 75 40×2 30×2 204-250 26 30,644 13,900
BW3618 36" 915 215" 5,462 150-175 135-160 2" 63 40 30 91-136 32 12,544 5,690
BW4420 44" 1,115 240" 6,100 200-250 180-225 3" 75 50 37 114-170 26 18,585 8,480
BW3618D 36"×2 2×915x2 215" 5,462 315-350 285-315 2" 63 40×2 30x2 159-207 32 22,013 9,985
BW4420D 44"×2 1,115×2 240" 6,100 400-495 360-450 3" 75 50×2 37x2 204-250 26 30,644 13,900
C D
A B C D
Model
inch mm inch mm inch mm inch mm
CW3618/BW3618 253" 6,415 125" 3,185 58" 1,465 - -
CW4420/BW4420 284" 7,210 144" 3,668 71" 1,810 - -
CW3618D/BW3618D 253" 6,415 125" 3,185 - - 96" 2,436
CW4420D/BW4420D 284" 7,210 144" 3,668 - - 112" 3,030
FW Series Fine Material Washer
AMPCO Fine Material Washers are used to wash away and
separate clay, dirt and other foreign objects from aggregate
materials. Its: sealing structure, adjustable overflow, wear plates,
and reliable transmission mechanism ensures an effective
cleaning and dewatering.
Design Features
■ Structure made of heavy steel
plates
■ Adjustable overflow wear plates
threaded bolts
■ Selection of different speeds
available
Product Features
■ High strength body and long
service life
■ Optimized cleaning and dewatering
protection
■ Water content in gravel after
washing is controllable
Technical Parameter Table
FW3625 36" 915 307" 7,800 100 90 3/8" 10 15 11 9-82 21 12,743 5,780
FW4432 44" 1,115 385" 9,788 170 155 3/8" 10 25 18.5 14-168 17 22,201 10,070
FW5434 54" 1,370 394" 10,000 270 245 3/8" 10 40 30 14-216 14 30,402 13,790
FW6636 66" 1,676 433" 11,004 395 360 3/8" 10 60 45 14-261 11 46,143 20,930
FW3625D 36"×2 915×2 307" 7,800 200 180 3/8" 10 15×2 11×2 24-141 21 21,694 9,840
FW4432D 44"×2 1,115×2 385" 9,788 346 315 3/8" 10 25×2 18.5×2 29-318 17 41,767 18,945
FW5434D 54"×2 1,370×2 394" 10,000 545 495 3/8" 10 40×2 30×2 29-386 14 61,024 27,680
FW6636D 66"×2 1,676×2 433" 11,004 790 720 3/8" 10 60×2 45×2 29-568 11 90,423 41,015
FW7238D 72"×2 1,830×2 460" 11,675 950 860 3/8" 10 75×2 75×2 29-700 11 116,405 52,800
A C E
D F
A B C D E F
Model
inch mm inch mm inch mm inch mm inch mm inch mm
FW3625 335" 8,520 156" 3,970 55" 1,385 111" 2,823 - - - -
Design Features
■ Structure in heavy steel plate
■ Specially-designed heavy duty
gearbox
■ Specially-designed water discharge
opening
■ Specially-designed layout
arrangement of vanes
Product Features
■ High strength body and long
service life
■ Capable of continuous, heavy-load
operations
■ Easy to drain after cleaning the
LW3630 36" 900 360" 9,150 49-121 45-110 75 100-148 75-110 12-114 32 38,889 17,640 87,677 39,770
LW3635 36" 900 419.6" 10,660 49-121 45-110 75 148 110 12-114 32 47,200 21,410 104,014 47,180
LW4430 44" 1,100 360" 9,150 77-176 70-160 100 148-200 110-150 17-170 26 57,915 26,270 139,288 63,180
LW4435 44" 1,100 419.6" 10,660 77-176 70-160 100 200 150 17-170 26 70,944 32,180 165,853 75,230
A
C
A B C
Model
inch mm inch mm inch mm
High capacity
■ High efficiency in removing
ferromagnetic impurities
■ Automatic cleaning, automatic iron
discharge
High Performance
■ Strong magnetic field
■ Self-cooling, high energy saving
High Efficiency
■ Easy to install and maintain
■ Safe, easy to operate
There are two types of these magnetic separators; the fixed type
and the self-cleaning type. The fixed type requires manual unloading
and the self-cleaning type is automatically unloaded. No power
needed; the conveyor is driven by motor or hydraulic motor.
installation
■ Simple to operate and maintain
Highly versatile
■ Modular designs and competitive lead
times
■ Customisation available to suit special
arrangements
■ Designed to meet country of
Features of conveyors
Features of Stacking Conveyors
conveyors
AMPCO offers a wide range and types of belt conveyors. Conveyor
■ Heavy structure specifications with width from 18" to 72", length from 2 meters to
■ 360°of rotation several kilometers and belt speeds from 1.6m/s to 4.5m/s. With
■ Cylinder lifting legs a reliable and robust structure, the standardized truss design can
■ Equipped with trailer towbar; easy quickly be configured to meet different length requirements. The
to move modular design greatly shortens design cycles and helps to reduce
■ Circular stacking transportation cost.
■ Stacking wheels either manual or
Type of conveyors
electrically driven
■ Stacking type: with rotating, lifting, and stretching functions, capable
of handling a large stacking area
■ Feeding type: large processing capacity, can have two-way feeding
output
■ Grasshopper: short distance, multiple relay transport, easy to move
distribution
■ Mobile: easily moved or relocated by truck
Belt feeder
www.ampcominerals.com