Professional Documents
Culture Documents
Summary
Matexil® DA-DLP is a combined dispersing and levelling agent designed for the application of disperse dyes to
polyester fibres, especially in short cycle dyeing.
Advantages
Combined dispersing and levelling agent stable to high temperature, thus ensuring effective dispersing
power in the cooling dye bath
- To avoid dye spots on yarn or fabric
- Less surface deposition of unexhausted dye and therefore improved fastness
- dispersing oligomers and preventing deposits on machines and goods
Helps compensate for lack of compatibility of dyes in mixtures used because of economy or particular
fastness properties.
Improved 'Right-First-Time' dyeing and increased productivity.
Enables shorter cycle times to be used and increased efficiency.
Shade consistency
- Within any one batch of yarn or fabric
- From batch to batch and avoiding problems of body panels not matching.
Features
No compromise in dispersing properties - Matexil® DA-DLP has high temperature stable dispersing powers
similar to the market-leading Matexil® DA-N.
Two functions in a single product
Improves migration of even the most difficult, high molecular size, disperse dyestuffs.
No restraining action on exhaustion of disperse dyes, full yields are obtained in deep shades.
Anionic chemical nature ensures compatibility with all commonly used polyester dyeing auxiliaries.
No cloud point effect.
No carrier content, no formaldehyde content, no anti-foam content.
Low viscosity suitable for liquid dispensing.
Storage
Similar to most common surfactants, Matexil® DA-DLP has a shelf life of at least 12 months when stored under
conditions of good housekeeping.
Croda India Company Pvt Ltd., Plot No 1/1, part TTC Industrial Area Thane Belapur Road
Koparkhairne, Navi Mumbai 400 710 India Tel +91 (22) 30948400 / 500 / 600 Fax +91 (22) 27780007 TA/2014/DA-DLP/01
www.croda.com Page 1 of 2
Physical Properties
Type Anionic
Composition Proprietary anionic compound
Appearance Light brown liquid
Solubility Readily soluble in water, pre-dilute with 4-5 times the volume of
water.
Compatibility Stable to hard water and all acids and bases used in dyeing
Compatible with all other dyeing agents used during disperse dyeing.
Application
Matexil® DA-DLP used as dispersing and levelling agent in dyeing polyester
Matexil® DA-DLP is suitable for use on all types of high temperature dyeing machinery. After scouring the goods
where necessary, the dye bath is set with fresh water and temperature raised to 60ºC.
Meanwhile, Matexil® DA-DLP is pre-diluted by adding the product to 4-5 times its own volume of warm water.
Add pre-diluted Matexil® DA-DLP to the bath together with other chemicals required (sequestering agent,
acid/acid buffer) and circulate. Adjust to pH 4.5 to 5.5.
Raise temperature from 60ºC to maximum dyeing temperature (130-135 o C) at desired temperature gradient.
Rapid rates of rise of 2 to 4ºC per minute are possible. Run 30 to 60 minutes. Cool to temperature at which the
liquor can be safely drained without causing creasing, then rinse or back-scour/reduction clear as necessary.
Stripping or re-levelling treatments should be followed by thorough rinsing and reduction clearing to ensure
maximum fastness.
Treat the goods for 15 to 20 minutes at 70 to 80oC to achieve optimum fastness and clarity of shade.
Non-warranty
The information in this publication is believed to be accurate and is given in good faith, but no representation or warranty as to its completeness or accuracy is
made. Suggestions for uses or applications are only opinions. Users are responsible for determining the suitability of these products for their own particular
purpose. No representation or warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties of
merchantability, fitness for a particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright,
trademark and designs. Any trademarks identified herein are trademarks of the Croda group of companies.
Croda India Company Pvt Ltd., Plot No 1/1, part TTC Industrial Area Thane Belapur Road
Koparkhairne, Navi Mumbai 400 710 India Tel +91 (22) 30948400 / 500 / 600 Fax +91 (22) 27780007 TA/2014/DA-DLP/01
www.croda.com Page 2 of 2