Professional Documents
Culture Documents
OVERVIEW:
Based on distributor feedback and field testing, AFEX has improved the design of the sensor [ABOVE‐LEFT] to use two
2pin Deutsch plug connectors. Using two 2pin connectors instead of one 4pin connector has been shown to reduce stress
on the connectors and improve ingress protection. The updated sensor is part number A700105.
The updated sensor design also allowed AFEX to create an end of line resistor that is integrated within the body of a
2pin Deutsch receptacle [ABOVE‐RIGHT], which offers improved ingress protection and ease of installation. The integrated
EOL is available for both 4.7 kΩ (part number A724021 – grey in color) and 100 kΩ (part number A729031 – black in color)
installations, and can be used with sensors or linear detection wire.
The updated designs will begin shipping in the beginning of 2019. At that time the A700100 sensor and the
A703100/A703400/A724020/A729030 end of line resistors will be discontinued.
AFEX recommends having stock on hand of A700655 2pin Deutsch plug packages and A700660 2pin Deutsch
receptacle packages for use when replacing existing A700100 4pin sensors and A703100/A703400/A724020/A729030
end of line resistors. With these 2pin connector packages you will able to retrofit the connectors on the high temperature
wire from 4pin to 2pin without replacing the wiring or additional sensors.
PART NUMBERS:
A700105 SENSOR‐ASSM 300F 2PIN
A700655 CONNECTOR‐PLUG 2 WIRE PKG
A700660 CONNECTOR‐RECEPT 2 WIRE PKG
A724021 SENSOR‐INTEGRATED EOL 4.7K
A729031 SENSOR‐INTEGRATED EOL 100K
If you have any questions, please contact our office at (919) 781‐6610.
PAGE 1 OF 1