Professional Documents
Culture Documents
PRODUCT CATALOGUE
Table of Contents
Motwane is an Indian engineering company with an To be collaborative, curious, and authentic are the core
impressive legacy and a strong focus on R&D and IoT values that have been part of Motwane’s success story from
capabilities Its products, ranging from power plants to the start.
plug points, and surpass existing quality standards, are
synonymous with robust, reliable, and long-last What Make Motwane Unique ?
performance.
Pioneers
As a result, the Motwane brand has earned the trust of
clients over the last 100 years with its innovative, energy- We are innovators in the design and manufacture of high-
efficient, and user-friendly solutions. performance, high-precision electrical Test & Measurement
equipment.
Innovation
We create innovative IoT technologies and digital offerings
that are designed to boost productivity, efficiency, energy
saving, proactive decision making, and help our customers
to take a step towards a green, more sustainable future
R&D Facilities
We work in world-class R&D facilities in which all of
Motwane’s products and solutions are indigenously
designed by over 40 technologists. Maybe not world class?
Our Journey
Our Legacy 3
A Legacy of Innovation
We are committed to taking the
Motwane was one of the earliest manufacturing
passion Mr. Nanik Motwane showed
companies during the time of the British Raj.
in the early days of the company
Inaugurated in 1909, Motwane started out
from a patriotic past into the
pioneering the mass medium of radio, and from
digital future.
then on, the firm’s history has been tightly
interwoven with the history of India. In 1929, 18
years before Indian Independence in 1947, the The bottom line of hope
Freedom Movement led by Mahatma Gandhi was
Motwane strives to continue to leave a mark on Indian
well under way. Motwane’s Managing Director at history – within the country’s boundaries and abroad - and
the time, Nanik Motwane, recounts: to help shape the next generation of engineers to
successfully tackle the challenges of tomorrow. Driven by
“ I saw Gandhi-ji going from insatiable curiosity, and the will to never give up, we work
platform to platform to
hard to create digital and physical spaces where we can
address meetings at one
turn dreams into realities. Our hope lies in being able to
and the same place, to
enable his weak voice to be predict the future by learning from the past, live in
heard by large numbers. It harmony with nature and each other, and to use the
was then that I felt that I advancements of technology and our capacity as
must find some means to
‘machine whisperers’ to create a safer, more equal, and
amplify his voice. ”
creative world.
Mr. Nanik G. Motwane
The last 100 years has seen the company rise to a Industrial & Commercial
significant position across the electrical sector in India and Embracing the global shift towards intelligent, cloud-
abroad, pioneering electrical test & measurement based technologies, Motwane offers efficient solutions
equipment that set market benchmarks for a wide range of that help its clients to take the necessary leap towards a
clients. Motwane’s long-standing commitment to greener future.
innovating products that anticipate future needs has led to
further diversification, and the creation of MOT-WARE, an
IoT-based test data software, AI engines for data
vis u al i s at io n , s m ar t lig ht i n g , a n d o t he r e n e rgy
management solutions.
Electrical
Working closely with our customers enables Motwane to
successfully innovate, design, and engineer future-ready
solutions. For the electrical sector, we have engineered a
variety of high precision test & measurement equipment
that have been industry standard for decades. Our
electrical business is organised into the following two
verticals.
The world is transitioning through a massively changed
Power & Grid technological landscape. There is a global shift towards cloud-
For decades, Motwane’s Test & Measurement product based IoT technologies that have become a part of day-to-day
Operations in intelligent factories, industry 4.0, green
range has helped clients to maintain efficiencies, ensure
buildings, and net-zero, with the remote monitoring of capital
safety, and increase profitability.
equipment through ‘digital twins’.
CE Certification
CE marking is an administrative marking that indicates
conformity with health, safety, and environmental protection
standards for products sold within the European Economic
Area (EEA).
Product & Services 6
MOT-WARE
IoXn
Motwane built its proprietary IoXn technology, an
easyto- install ‘plug & play’ product, that connects
various assets: transformers, Chillers, Water Meter,
Motors, etc. to the cloud. Enjoy real-time monitoring
and asset management with the magic of one touch
through MOT-WARE.
Motwane Academy
Motwane academy is built to bridge the skill gap and
enable the future of engineers with better
opportunities and technology.
Test & Measurement - 10K PI 8
Features
Available IR Testing with Diagnostic Modes
PI, DAR, DD, Step Voltage, BDV & Burn Test
Programmable Test Voltage from 500V-10KV
Insulation Resistance Range from 1KΩ to 20TΩ
Three Programmable Timers
Programmable Break Down Current Settings
Mains & Battery operation
Internal Data Storage up to 1000 tests*
Galvanic Isolated RS 232 & USB Port
Application Software for Data Trending Analysis
AC/DC voltage measurement up to 600V
Auto Calibration at every start up
Burn Mode for uninterrupted Insulation Resistance Testing
Alarm Mode with Min-Max Settings & Pass Fail Indication
CAT IV 600V, IP54, Complies with latest IEC/IS Standards
Hand Interlock Switch
10K PI
Diagnostic Insulation Tester
CAT IV IP Applications
600V 54
The Insulation Resistance Test is an essential test that helps
to verify the condition of electrical insulation. Insulation
10K PI is an Insulation Diagnostic Tester having test voltage range up
resistance quality of an electrical system degrades with
to 10KV, designed & developed indigenously at the state of the art
time, environment condition i.e. temperature, humidity,
R&D laboratory to conduct automatic insulation tests on high voltage
moisture and dust particles. The instrument is designed for
equipment's like Transformers, Cables, Bushings, Switchgears &
routine insulation resistance testing and diagnostic testing
Rotating Machines 10K PI is a microprocessor based instrument
like PI, DD, DAR & SV of high voltage electric apparatus like
deploying the latest technology & very high speed data sampling to
transformers, generators, motors, cables, bushings, LAs,
give correct, repetitive readings & quality performance under harsh
switchgear, etc. and is temperature independent. Trending
electrical conditions. It has a wide insulation resistance range up to
of data can reveal vital information about insulation quality
20TΩ. and enables the user to take informed decision.
Power Supply
Technical Details 10K PI Mains 85V-265V, 50Hz +10%
Voltage Selectable 500V, 1KV, 2.5KV, 5KV, 7.5KV, 10KV Operating Temperature 0℃ to 55℃
Programmable Timer T1, T2 & T3 (0-99Min 59sec) Dimension 360mm(L) X 290mm(W) X 210 mm(H)
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Test & Measurement - 5K PI 10
Features
Programmable Test Voltage 250 - 5000V in steps of 50V
Insulation Resistance upto 10TΩ
Three Programmable Timers
Modes for conducting IR, Leakage current, PI, DAR,
DD, SV and BDV test
Mains & Battery Operation
CE, CAT-IV 600V, IP65, complies with latest IEC/IS
Standards
1000 test results storage
Optically Isolated RS-232 port & USB port
AC / DC Voltage Measurement
Pass Fail Limit is provided with software generated results
Bluetooth enabled for Motware Mobile App
Connected to Cloud
5K PI
Diagnostic Insulation Tester
Accuracy ± 5% of reading + 5 digit After the end of the test, the result including resistance,
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Test & Measurement - IT 51 12
Features
Selectable Test Voltage from 250V, 500V, 1000V, 2500V,
5000V DC.
Insulation Resistance Measurement up to 1TΩ
Polarization Index Measurement Facility
Short Circuit Current < 2 mA + 0.5 mA
AC/DC Voltage Measurement up to 600V.
Two Programmable Timer from 0 sec to 99 minutes
Liquid Crystal Display with pleasant white backlit.
Internal rechargeable Battery.
Safety - IP 54, CAT IV 600V and CE conformity.
Robust ABS body with self-carrying handle for easy
portability.
Automatic discharge for capacitive circuits.
Guard Terminal to minimize the surface leakage
Pass - Fail Limit
IT 51
5KV Digital Insulation Resistance with Polarization Index
CAT IV IP Applications
600V 54
The Insulation Resistance Test is an essential test that help to
verify the condition of electrical insulation. Insulation
The Motwane IT-51 is a microprocessor based Digital Insulation Tester resistance quality of an electrical system degrades with
designed for testing all types of electrical apparatuses like time, environment condition i.e. temperature, humidity,
transformers, switchgears, motors, generators, cable and substation moisture and dust particles. The instrument is designed for
products. IT-51 has a digital display and an analog arc display. The routine and diagnostic testing like IR, PI of high voltage
instrument automatically performs IR Test and Polarization Index Test electric apparatuses like.
by selecting the mode. IT-51 has a large LCD white backlit display, it
shows leakage current in scrolling form along with IR value and PI All electrical rotating machineries
value. Transformers
HV & LV Switchgears
Insulation Resistance Test : The is an important test for future
comparative purposes, acceptance test and also for determining the Cables
Insulation Resistance
Accessories
Analog Display 1 KΩ to 1 TΩ
Standard
Digital Display 1 KΩ to 1 TΩ (3 Digit Display)
Test leads 3 meter : 1 Set
Insulation Accuracy User Manual : 1 No
Up to 1GΩ All Ranges ± (2 % + 2 digits) Calibration Sheet : 1 No
Carrying bag : 1 No
Over 1GΩ 5000V ± (2% + 0.04% per GΩ)
Mains Protected Fuse : 1 No
2500V ± (2% + 0.08% per GΩ)
Resolution 0.01
General
Environmental Specifications
Operating Temperature -10°C to 55°C
at 40°C
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Test & Measurement - IT-250G Spot 14
Features
Selectable Test Voltage from 250V, 500V, 1000V, 2500V,
5000V DC
Insulation Resistance Measurement up to 250GΩ
Short Circuit Current < 1.4 mA. approx
Programmable Timer from 1 sec to 99 minutes
Internal Memory Storage of 1000 readings
Auto Power Off to save battery
Auto Calibration at every start up.
Continuity Testing at 100mA approx.
GUARD Terminal to eliminate surface leakages.
Battery Status Indicator
Safety/EMC CE CAT III (1000V)/ CAT IV (600V), IP54
Shock proof, heavy duty & shrouded test lead
Inbuilt Digital Filter
IT-250G
5KV Battery Operated Digital Insulation Resistance
amber backlit allows user to work in dusk environment also. Industrial Purpose
instrument comes with rugged strap which gives easy handling valid at 25°C + 3°C, 55% RH +10%
during transit and also in handling while testing at outdoor sites. The Accuracy is valid from 10% of the range to 95% of the range
guard terminal features minimize the effects of surface leakages and Temp. Coefficient = (0.2% X Specified accuracy) per degree
give error free measurement. Loaded with multiple proposition, centigrade referred to 25°C
IT250G Spot addresses the routine insulation testing need of service Accuracy is not valid if battery status indicator symbol blinks
providers. It also has continuity range for measuring continuity. on display. In this case immediately replace the batteries
Automatic discharge for charged objects is provided and decaying It is recommended that calibration equipment used to verify
discharge voltage is displayed.
the accuracy of the instrument should be 10 times more
accurate
It is recommended to recalibrate the instrument once in year
Test & Measurement - IT-250G Spot 15
Environmental Specifications
Technical Details IT-250G
Operating Temperature 00C to 500 C
500V 25GΩ
Safety and Standards (CE Certifications)
1000V 50GΩ ± (5% + 5)
Safety and Standards (CE Certifications)
2500V 125GΩ Measurement Category : CAT IV (600V) Reinforced insulation
Continuity
Accessories
Range Accuracy Overload Protection
Standard
0-200Ω ±(3% + 10) 230V DC/AC rms for 30 sec
Test Lead set (3 mtr. Long shrouded banana with
Buzzer will sound < 20Ω approx.
crocodile clip)
Open circuit voltage on continuity range is 8V approx. Red lead for +ve terminal 1 No.
Black lead for ‐ve terminal 1 No.
Short Circuit current is 100mA approx. on Continuity range w.r.t
Green lead for GUARD terminal 1 No.
GUARD/COM terminal (Battery should be in a full charged condition).
Instruction Manual 1 No.
General Specification Calibration Certificate 1 No.
Carrying Bag 1 No.
Insulation Resistance Measurement Digital & Analog (Bar Graph) indication
Dimensions 230 mm(L) X 165 mm(W) x 95 mm(H) Test Lead set (10 mtr. Long shrouded banana with
Weight 1.5 Kg approx. (without accessories) crocodile clip) 1 No.
Red Lead for +ve terminal. 1 No.
Default Test on time 30 sec.
Black Lead for ‐ve terminal 1 No.
Selectable test time 1 sec. to 99 minutes. Green Lead for GUARD terminal
HV ON Indication Visual & Audible. Test Lead set 1 meter long with one end pointed tip &
another with 4mm shrouded banana.
Data Storage functions 1000 readings.
(For continuity range)
Data Recall function.
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Test & Measurement - MIRT61 16
Features
Multi-featured single box design
Wide IR range up to 6GΩ, suitable for all LT applications
Selectable Voltage Facility 50, 100, 250, 500 & 1000V
Maximum test current of 1mA
Industrial Grade True RMS Multimeter functions
Voltage Measurement up to 1OOOV AC/DC
Dual Display LCD with Amber backlit
Auto Power Off Facility, Reading Hold / Lock, Min/Max,
FLT ( Filter )
Bluetooth enabled for Motware Mobile App
Mulitimete
r + IR Test
er
Connected to Cloud
MIRT-61
1KV Digital Multimeter Insulation Tester
CAT IV IP Applications
Ideal for Insulation Resistance Measurement during
1000V 54
maintenance for electrical equipments (Motors,
The Motwane's multipurpose tester model MIRT-61 is a versatile, Transformers, Machines, Switchgears etc.)
battery operated Digital Insulation Tester with true RMS industrial Electrical Wire/Cables for Distribution Networks
grade multimeter features, best suited for industrial preventive Control Panels
maintenance With test voltage range up to 1KV, highest insulation Electrical Contractors
Industrial, Commercial & Residential Installations
resistance range of 6GΩ and multi-featured function of RMS
Railways applications & Telecom applications
multimeter (i.e. AC/DC 1OOOV); makes it a superior offering for the
industry and service segments. It is designed predominantly for low
voltage insulation resistance testing in maintenance and services,
which involves the applications like Cables/Wires, Rotating Machines,
LT transformers, Switchgears and Industrial installations etc. It is
designed to suit the extreme environment conditions. Save your
operating cost and test more with this single box design rather than
buying two different products.
Overload Protection
Technical Details MIRT61
Fuse protection for 'mA' Input Terminal
0.8A/250V fast blow type,
Ceramic fuse
General
Safety CE Certifications
Display 6000 counts, LCD with amber backlit
Directives for CE Certification: LVD: 2006/95/EC,
Polarity Automatic
EMC: 2004/104/EC.
Display Update Rate 3 Times per second nominal
Measurement Category: CAT IV (600V) Reinforced insulation.
DCV, ACV, Resistance, Capacitance, Relevant Standard (S): EN61010-1, EN61326-1
Ranges
Frequency, AC/DC Current, IRT
IP Rating (dust & water protection) : IP 54.
Auto Power Off After 10 mins Test lead set Red & Black one end with shrouded
Range 600Ω- 60MΩ (0.1Ω to 10KΩ resolution ) Test lead Green, one end with shrouded banana 4 mm
Continuity Test Note : To learn more about the Motware Application, check Page 91
Resolution 0.01Hz
Accuracy ± (0.1%+3)
Overload Protection 1000V DC/AC rms
Environmental
Operating Temperature 0°C to 50°C
to 40°C,Non-condensing
Test & Measurement - MIRT61 18
1050V
1 600mV 0.1mV 600.0mV DC +(0.9%+3) N/A DC/AC rms
0.8A/250V fast
1 600mA 0.1mA 600.0 mA +(1%+5) +(1.2%+5) blow type ceramic
fuse
Insulation Test
Output Range Resistance Accuracy
Resolution Test Current
Voltage (Auto Ranging only) +(% of rdg + Digits)
50 V 1 mA approx@
30 to 300 kΩ 1 kΩ +(3% + 5 counts)
+(10%+5) 50 kΩ
0.30 to 3.00 MΩ 0.01 MΩ
3.0 to 30.0 MΩ 0.1 MΩ
30 to 300 MΩ 1 MΩ
100 V 1 mA approx@
60 to 600 kΩ 1 kΩ +(3% + 5 counts)
+(10%+5) 100 kΩ
0.60 to 6.00 MΩ 0.01 MΩ
6.0 to 60.0 MΩ 0.1 MΩ
60 to 600 MΩ 1 MΩ
250 V 1 mA approx@
0.15MΩ to 1.50 MΩ 0.01 MΩ +(1.5% + 5 counts)
+(10%+5) 250 kΩ
1.5to 15.0 MΩ 0.1 MΩ
15 to 150 MΩ 1 MΩ
0.15 to 1.50 GΩ 0.01 GΩ
500 V 1 mA approx@
0.30MΩ to 3.00 MΩ 0.01 MΩ +(1.5% + 5 counts)
+(10%+5) 500 kΩ
3.0 to 30.0 MΩ 0.1 MΩ
30 to 300 MΩ 1 MΩ
0.30 to 3.00 GΩ 0.01 GΩ
1000 V 1 mA approx@
0.60MΩto 6.00 MΩ 0.01 MΩ +(10% + 3 counts)
+(10%+5) 1MΩ
6.0 to 60.0 MΩ 0.1 MΩ
60 to 600 MΩ 1 MΩ
0.60 to 6.00 GΩ 0.01GΩ
Test & Measurement - i-12 19
Features
Smart
Go-No-Go Test Facility.
Pre selectable Timer Facility.
Mains Eliminator.
Selectable Voltage Facility 50, 100, 250, 500 & 1000V.
Auto Ranging Measurement from 10KΩ to 2GΩ - wide range
Live Circuit Detection up to 600V AC/DC.
Low Resistance Measurement up to 100Ω with continuity testing.
Temporary Storage of 10 readings.
User Selectable Backlit to measurement in dark environment.
Low Battery Indication.
Auto Power Off Facility.
Blown Fuse Indication.
Safe
CE mark conforming to latest EN 61010-1:2010.
EN 61326-1:2005, CAT IV 600V, IP54 protection.
Overload protection 1200V for all ranges.
Guard Terminal to minimize surface leakage.
Strong
i-12 Robust and Rugged Polycarbonate casing.
1KV Battery Operated Digital Insulation Resistance
Power
Technical Details i-12
Battery : 6 X 1.5V cells IEC LR6 Alkaline
is necessary.)
Environmental Insulation
Storage Temp. 0
-25 C to 65 C 0
Continuity Test
0 - 9.99 Ω 0.01 Ω ± (3% ± 2)
Current 100mA
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Transformer Testing Instruments - XWRM-25A 21
Features
Test Current : 25A, 10A, 5A, 1A, 100mA & 10mA
Resolution of 0.1μΩ with + 0.1% Accuracy
3 independent channels for resistance measuring
Auto Range Facility
Heat Run Test Facility
60V High Open Circuit Voltage for stable readings
Demagnetization Facility
OLTC Dynamic Resistance Test with Graph: Time vs Current
Inbuilt Thermal Printer & Memory
Bluetooth enabled for Motware Mobile App
Temperature Measurement & Correction
Emergency Stop Switch
Connected to Cloud
XWRM-25A
Winding Resistance Meter
Display LCD
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Transformer Testing Instruments - XWRM - 10A 23
Features
Test Current : 10A, 5A, 1A, 100mA & 10mA
Resolution of 0.1μΩ with +0.1% Accuracy
3 independent resistance measuring channels
Auto Range Facility
Heat Run Test Facility
48V Open Circuit Voltage for stable readings
Demagnetization Test Facility
OLTC dynamic test with Graph : Time vs Current
In-built Thermal Printer & Memory
Bluetooth enabled for Motware Mobile App
Temperature Measurement & Correction
Emergency Stop Switch
Connected to Cloud
XWRM-10A
Transformer Winding Resistance Meter
Technical Specifications
Power Supply 115/230VAC,50/60 Hz Environmental
10A, 5A, 1A, 100mA & 10mA Operating Temperature 0°C to 55°C
Test Current
Open Circuit Test Voltage 48 VDC Storage Temperature -10°C to 60°C
Physical Specifications
Resistance Measurement Range
Physical Specifications 485mm x 392mm x 192mm
Accuracy +(0.1% of rdg. + 5 counts)
10 Kg (Approx)
Weight
Range Maximum
Resolution Analytic Software
Test Current Display
(Ω) (Ω)
(Ω) Type Windows based analytical software
P P P P 2Ω 0.1mΩ 1.9999 Ω
P P P 20 Ω 1m Ω 19.999 Ω Accessories
P P 200Ω 10mΩ 199.99 Ω
Standard
P 2000Ω 0.1 Ω 1999.9 Ω
15 meter measuring test lead set with alligator clamp
P 4m Ω 4µΩ 4.0000m Ω Mains Power cord
Optional
General
OLTC Probe
Principle 4 wire measurement
PC Software
Measurement Channel 3 Resistance & 1 Current channels
USB Cord
Temperature Channel 2 Channel Temperature Sensor
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Transformer Testing Instruments - XTRM-3 25
Features
Test Voltage : 10V, 40V, 100V
Measure Turns Ratio, Voltage Ratio & Ratio Error
Measure Phase Deviation & Excitation Current
Auto Detection of Transformer Vector Group
Quick set up with intuitive guide
Inbuilt Printer with Memory for 500 test results
Bluetooth enabled for Motware Mobile App
Connected to Cloud
XTRM-3
Transformer Turns Ratio Meter
Safety Features
Technical Details XTRM-3
Safety / EMC in accordance with EN 61010-1, EN 61326-1
CE Certified
Ingress Protection IP54 / CAT IV 600V
Emergency Stop
Technical Specifications
Power Supply 115V/230V AC, 50/60 Hz Full Windows Compatible Software
Measurement ratio 0.8 : 10000 Software is fully compatible with Microsoft
Data Downloading
Software 1 No
Resolution 0.1mA
USB Cable 1 No
Phase Angle +1800
Remote tap changer switch 1 No
Phase Angle Resolution 0.01 20 Mtr. Test Leads with alligator clamp
Accuracy 0
+0.50 + 1digit Bluetooth application via cloud based
Motware application
Display LCD
PC interface USB Note : To learn more about the Motware Application, check Page 91
Environmental Specifications
Operating Temperature 00C to 400C
Physical Specifications
Dimensions 188 mm(L) x 401mm(W) x 502mm(H)
Weigh 15 kg (Approx)
Test & Measurement - MOTR 27
Features
Dissipation Factor , Volume Resistivity, Dielectric Constant
(Permittivity), Watt Loss
Inbuilt Oil Heating Chamber with precise temperature control
Test Cell according to IEC 60247
Preprogrammed & Customized Test Sequences
Inbuilt Thermal Printer
Internal Memory for 250 Test
USB Interface
Portable Calibrator
Oil Auto Drain Facility
Auto Sequence Test
Bluetooth enabled for Motware Mobile App
CAT III IP
Applications
600V 54 Ÿ The
The dissipation
dissipation
factor
factor
indicates
indicates
the
thedielectric
dielectricloss
lossof
of the
liquid andand
liquid thusthus
it's dielectric heating.
it's dielectric The dissipation
heating. factor
The dissipation
testfactor
is widely
test used as anused
is widely acceptance and preventive
as an acceptance and
Motwane's MOTR is a microprocessor-based compact designed for
maintenance
preventivetest for insulatingtest
maintenance oil. The
for dissipation
insulating factor of
oil. The
precise measurement of the dissipation factor and volume resistivity
newdissipation
oil should not exceed
factor 0.05
of new oil%should
and the dissipation
not factor
exceed 0.05 %
of insulating oils. MOTR is built in a single unit and on boarded with
canand
gradually increase in factor
the dissipation servicecan
to a gradually
value as high as 0.5%,
increase in
international test standards for automatic measurement of all
i n service
m o st cto
ase
a s value
, i n d ias
c a thigh
i n g as
d e te r i o ra
0.5%, int i most
o n a ncases,
d /o r
parameters and also available with customized test sequences to
contamination with moisture,
indicating deterioration carbon,
and/or varnish, glyptal,
contamination with
conduct tests as per the user's requirement. The test cell is designed
sodium soaps,carbon,
moisture, or deterioration
varnish, products.
glyptal, sodium soaps, or
as per IEC 60247 with precise control for measuring dissipation factor
deterioration products.
and resistivity at 27°C & 90°C. MOTR also has an auto drain facility. It is ŸUsed Oil having a dissipation factor of less than 0.5% is
provided with internal memory & printer for on-field reports and also Used considered
Ÿusually Oil having a dissipation
satisfactoryfactor
for of less than
service and0.5% is
with
has a USB interface available for data transfer. The calibrator with usually considered
dissipation satisfactory
factor between 0.5% for
andservice and with
2% should be
standard dissipation factor & resistivity ranges are available for dissipation
considered factorinbetween
as being doubtful 0.5% and 2%
and further should be
investigation
validating the performance of MOTR. considered and
recommended as being in doubtful
in excess of 2.0 % andmayfurther
be an
investigation
operational recommended
hazard. and in excess of
It should be reconditioned or2.0 % may
replaced.
MOTR has a Bluetooth connectivity module with Motware mobile app
for remote access of testing data & storage in the cloud for further Useful for measuring the quality of insulating oil, used in
analysis & record purposes. electrical apparatuses like:
Heater
Technical Details MOTR
Temperature Range 20°C - 150°C
Accuracy +0.5°C
Resolution 0.1°C
Accuracy +1%
Resolution 1 X 10-5
Operating Temperature -100C to 500C, 90% non condensing
Accuracy +1% of rdg + 0.0001 (1 X 10-4)
Safety Standards IEC61010-1, IEC61326-1
Accessories
Standard
Dielectric Loss 0 -10.0 watts
Test Lead sets
Resolution 0.001 mili Watts
Oil Test Cell with 3 Terminals
Accuracy +1% of Reading + 10-5 Watts
Standard Calibrator
Pen drive loaded with MOTR software
software
Dielectric Constant 1-30
USB Cord
Resolution 0.001
Calibration Certificate
Transportation case
+10 % above 1014cm Note : To learn more about the Motware Application, check Page 91
Resolution 0.001
Test Cell
Cell Constant 620 Nominal
Features
Fully Automatic Microprocessor based
Pre-programmed International Test Standards
Customized Test Sequences
Voltage Slew Monitoring: Real Breakdown Monitoring (RBM)
Upgraded Sequence as per IEC60156-2018
Suitable to test Mineral, Ester & Synthetic Oil
Internal Memory up to 100 Test
USB Interface
Inbuilt Thermal Printer
Voltage Checker for onsite Calibration (Optional Accessories)
Bluetooth enabled for Motware Mobile App
Connected to Cloud
OTS-60A/80A/100A
Automatic Oil Insulating Test Set
Applications
Transformer oil is used as insulating medium in transformer,
switchgear and other electrical apparatuses and it also acts
as a coolant which dissipates (or to dissipate) heat of the
OTS-A series is a fully automatic microprocessor-based Oil BDV
transformer. In addition to these, insulating oil serves other
Tester designed with advanced technologies to measure the
purposes like, it helps to preserve the core and winding as
electrical breakdown strength of insulating oil. OTS-A has a quick
these are fully immersed inside oil and another important
sensing ability to measure accurate breakdown voltage. OTS-A series
purpose of Insulating oil is, it prevents direct contact of
is equipped with national & international standards for test sequences
atmospheric oxygen with cellulose made of paper insulation
and it also has has user-friendly customized test sequences. The large
used in windings, which is susceptible to oxidation. When
LCD display with keypad provides easy operation. It is provided with
insulating oil deteriorates due to aging / contamination
internal memory for 100 data storage & inbuilt thermal printer for the
which leads to catastrophic event due to flashover in
onsite report. As for safety, the OTS-A series has open ground
insulation. The voltage withstands capability of oil which
detection feature to avoid damage. The molded oil test vessel is
often is reduced ( which often reduces) due to
suitable to test Mineral, Easter & Synthetic Oil and it is provided with
contamination like dirt, water ingress and foreign particles.
an adjustable electrode gap setting to conduct the test as per
standards. The portable voltage checker is useful for onsite
The Motwane's OTS-A series useful for Oil Testing
calibration verification.
in the following equipments:
OTS-A series has a Bluetooth connectivity module with Motware
mobile app for remote access of testing data & storage in the cloud Power and Distribution Transformer
for further analysis & record purposes. Bushing
Instrument Transformer
Switchgear
Capacitors
Transformer Testing Instruments - OTS 30
UNE 21, BS5730A, BS 148, BS5874, VDE 0370, NFC 27, CE1344, BS5730, OCT 6581, Note : ** Applicable for OTS 100A upto 9.9 kV /sec.
SABS 555, AS1767, STA 8286, STAS 286, IP 295, Withstand A, Withstand B Maximum custom selected and for OTS 80A & OTS 60A
upto 5 kV /sec max.
Manaual Test,
Customized Test Standards 10 Note : To learn more about the Motware Application, check Page 91
Iterations - 24
PC Interface USB
Protection
Zero Start and HT Cover Open Interlock
Overload Protection
Features
Motorized Operation with 2kV/s ramp rate
Safety Door & Zero Start Interlock
Digital Display with optional Hold Facility till Variac
goes zero position
Voltage Checker for onsite checking (optional)
Earth Open Interlock
Bluetooth enabled for Motware Mobile App
Connected to Cloud
OTS-60DS/80DS/100DS
Digital Oil Insulation Test Set
Applications
Transformer oil is used as insulating medium in transformer,
switchgear and other electrical apparatuses and it also acts
Motwane offers a wide range of Oil Breakdown Voltage test kits to as coolant to dissipate heat of the transformer. In addition to
check dielectric strength of insulating oil used in Transformers, these, Insulating Oil serves other purposes like it helps to
Capacitors, Switchgears and Instrument Transformer for safe preserve the core and winding as these are fully immersed
operation and maintenance. OTS-DS series Series is meeting to inside oil and another important purpose of insulating oil is,
national & international standards for conducting BDV Test. It is also it prevents direct contact of atmospheric oxygen with
facilitated with Zero Start Interlock and Earth Open Interlock for cellulose made of paper insulation used in windings, which is
safety and avoid hazards. Also equipped with LED (Digital Display) susceptible to oxidation. When insulating oil deteriorates
along with Hold Facility. Designed with unmatched quality and due to aging / contamination which leads to catastrophic
improved reliability and safety having earth & zero start, safety door event due to flash over in insulation. The voltage withstands
interlock ensuring high degree of protection. OTS comes with two capability of oil which often is reduced (which often
variants models- OTS-A series - a pre-programmed fully Automatic reduces) to contamination like dirt, water ingress and
Oil BDV kit and OTS-DS Series - Motorized with Digital Display. foreign particles.
Accessories
Technical Details OTS-60DS/80DS/100DS
Standard
Overload Protection
Features
100A & 200A Pulsating DC selectable Test Current
Resistance Range : 0.1μΩ to 20mΩ, Autoranging
Direct mV Drop Reading
Built in Thermal Printer
Internal Memory of 500 test results
Mains and Battery Operated
USB Interface for Data Transfer
LED Indication for Mains/Battery/LOBAT
Calibration Due Indicator
Dual Grounding Facility
Conformity IP54, CE
Bluetooth enabled for Motware Mobile App
Connected to Cloud
PCRM200S
Contact Resistance Meter
CAT II IP Applications
300 54 Stationary and moving contacts are built from alloys that are
formulated to endure the stresses of electrical arcing.
The Motwane's Digital Contact Resistance Meter, Model However, if contacts are not maintained on a regular basis,
PCRM-200S is specially designed to measure extremely low their electrical resistance due to repeated arcing builds up,
resistances in micro ohm. The Instrument is based on Kelvin 4- wire resulting in a significant decrease in the contact's ability to
connection method for measurement of low resistance. User carry current and increase in resistance. Excessive corrosion
selectable current injection is 100A/200A. PCRM 200S has large LCD of contacts is detrimental to the breaker performance.
with backlight and display real time test information like injected Hence to check contacts is to apply DC and measure the
current with measured resistance value & voltage drop. User friendly contact resistance or voltage drop across the closed
instrument and it comes with heavy duty cable with clamps for contacts. The use of a higher current value gives more
accurate measurement and accessories are housed in easy reliable results than using lower current values. The
transportation case. Advance Windows based software is provided resistance value is usually measured in micro ohms (μΩ).
for data downloading, analysis and report generation. Internal
PCRM-200S is specially used to measure static contact
memory of 499 records is provided for onsite data storage and inbuilt
resistance of LV, HV, EHV circuit breaker contacts installed in
thermal printer to print the test results at the field.
energised switchyards. High accuracy and repeatability
PCRM 200S has dual ground technique to test circuit breaker with makes it a reliable tool for Quality Assurance and easy
both side grounded, which is safer to conduct test in substation. operation makes it a very handy tool for quick maintenance
checks in various industries
PCRM 200S has Bluetooth connectivity module with Motware mobile
app for remote access of testing data & storage in the cloud for Typical resistance measurement applications are
further analysis & record purpose. Circuit Breaker contact resistance
Bus bar joints
Isolator contacts
Weld joints
Bond resistance
Contact Resistance/Low Resistance Meter - PCRM-200S 34
Software Details
Technical Details PCRM 200S
Type Windows based software
Interface USB
Power Supply
Note : To learn more about the Motware Application, check Page 91
Mains 115V-230V, 50Hz / 60Hz Single phase AC supply
Environmental
Operating Temperature 0°C to 55°C.
Safety Standards
Safety According to EN 61010 - 1
IP Rating IP 54
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Contact Resistance/Low Resistance Meter - PCRM-100S 35
Features
100A Pulsating DC Test Current
Resistance Range : 0.1μΩ to 2mΩ Autoranging
Direct mV Drop Reading
Built in Thermal Printer
Internal Memory of 500 test results
Mains and Battery Operated
USB Interface for Data Transfer
LED Indication for Mains/Battery/LOBAT
Calibration Due Indicator
Dual Grounding Facility
Conformity IP54, CE
Bluetooth enabled for Motware Mobile App
Connected to Cloud
PCRM 100S
Contact Resistance Meter
CAT II IP Applications
300 54 Stationary and moving contacts are built from alloys that are
formulated to endure the stresses of electrical arcing.
The Motwane's Digital Contact Resistance Meter, model However, if contacts are not maintained on a regular basis,
PCRM-100S is specially designed to measure extremely low their electrical resistance due to repeated arcing builds up,
resistances in micro ohm. The instrument is based on Kelvin 4- wire resulting in a significant decrease in the contact's ability to
connection method for measurement of low resistance. Selectable carry current and increase in resistance. Excessive corrosion
current injection is 100A. PCRM 100S has a large LCD with backlight of contacts is detrimental to the breaker performance.
and display real time test information like injected current with Hence to check contacts, apply DC and measure the contact
measured resistance value & voltage drop. It is a user-friendly resistance or voltage drop across the closed contacts. The
instrument and it's comes with heavy duty cable with clamps for use of a higher current value gives more reliable results than
accurate measurement and accessories are housed in easy using lower current values. The resistance value is usually
transportation case. Advance Windows based software is provided measured in micro ohms (μΩ).
for data downloading, analysis and report generation. Internal
PCRM-100S is specially used to measure static contact
memory of 499 records is provided for onsite data storage and inbuilt
resistance of LV, HV, EHV circuit breaker contacts installed in
thermal printer to print the test results at the field.
energised switchyards. High accuracy and repeatability
PCRM 100S has dual ground technique to test circuit breaker with makes it a reliable tool for Quality Assurance and easy
both side grounded, which is safer to conduct test in substation. operation makes it a very handy tool for quick maintenance
checks in various industries.
PCRM 100S has Bluetooth connectivity module with Motware mobile
app for remote access of testing data & storage in the cloud for Typical resistance measurement applications are
further analysis & record purpose. Circuit Breaker contact resistance
Bus Bar joints
Isolator contacts
Weld joints
Bond resistance
Contact Resistance/Low Resistance Meter - PCRM-100S 36
Software Details
Technical Details PCRM 100S
Type Windows based software
Interface USB
2000 µΩ with 1 µΩ
Environmental
Operating Temperature 0°C to 55°C.
Safety Standards
Safety According to EN 61010 - 1
IP Rating IP 54
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Contact Resistance/Low Resistance Meter - PCRM-100SM 37
Features
100A True DC Test Current
Resistance Range : 200 µΩ with 0.1 µΩ
: 2000 µΩ with 1 µΩ
Direct mV Drop Reading
Internal Memory of 100 test
Dual Grounding Facility
Light weight & Portable
Rust Removing C Clamp
PCRM 100SM
Contact Resistance Meter
Applications
Stationary and moving contacts are built from alloys that
are formulated to endure the stresses of electrical arcing.
However, if contacts are not maintained on a regular basis,
Motwane's PCRM-100SM is True DC Contact resistance meter
their electrical resistance due to repeated arcing builds up,
designed for accurate and reliable result at a very reasonable cost.
resulting in a significant decrease in the contact's ability to
The instrument is based on Kelvin 4- wire connection method for
carry current and increase in resistance. Excessive
measurement of low resistance. PCRM 100SM has true 100A DC test
corrosion of contacts is detrimental to the breaker
current suitable for testing Circuit Breaker, Bus Bar, Isolator and Cable
performance. Hence to check contacts is to apply DC and
etc. PCRM 100SM has dual ground feature considering safety of
measure the contact resistance or voltage drop across the
operator and equipment. PCRM100SM is very light weight and
closed contacts. The use of a higher current value gives
portable with heavy duty test leads with C clamp and crocodile clips
more reliable results than using lower current values. The
to suit different applications.
resistance value is usually measured in micro ohms ( µΩ ).
Accessories
Technical Details PCRM 100SM
Standard
Memory Storage 100 Test Heavy duty crocodile clip 32mm Jaw Size.
15 meter Cable (heavy crocodile clip 32mm Jaw opening)
Physical Specifications
Dimensions 320 mm(L) x 435 mm(W) x 188 mm(H)
Power Supply
Environmental
Operating Temperature 0°C to 50°C.
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Contact Resistance/Low Resistance Meter - CRM100A 39
Features
Continuously selectable Current In steps of 10, 20,
50 & 100A resp.
Digital Resistance Reading from 0.1μΩ to 20mΩ.
Simultaneous Display of Test Current, Resistance
Minimum Resolution of 0.1μΩ
Accuracy + (0.5% +5 digits)
3 1 ⁄ 2- digit readings for resistance.
Custom built backlit LCD with sealed soft touch
membrane keypad.
Data Exchange to PC through USB Interface.
Built-in Memory to store up to 99 test results.
Test 'ON' indicator with LED & beep, provided to signify
the flow of Direct Current DUT.
CRM 100A
Contact Resistance Meter
Applications
Stationary and moving contacts are built from alloys that
are formulated to endure the stresses of electrical arcing.
The Motwane's Contact Resistance Meter- CRM 100A is a digital However, if contacts are not maintained on a regular basis,
micro ohmmeter, designed to measure extremely low resistance. The their electrical resistance due to repeated arcing builds up,
instrument is based on the proven 4-wire measurement method for resulting in a significant decrease in the contact's ability to
low resistances to eliminate the effect of lead resistance of two wire carry current and increase in resistance. Excessive corrosion
method. The instrument is designed to replace complex bridge set up of contacts is detrimental to the breaker performance.
with a single compact unit. The DC current injection in continuously Hence to check contact, apply DC and measure the contact
adjustable between 10A to 100A. The testing information is displayed resistance or voltage drop across the closed contacts. The
on large LCD with backlit, real time data is displayed during the test use of a higher current value gives more reliable results than
using lower current values. The resistance value is usually
ON condition. The instrument gives a high resolution of 0.1 μΩ on 200
measured in micro ohms (μΩ).
μΩ resistance range.
CRM 100A has a large application for direct and indirect
The instrument is easy to operate and user friendly. Accessories are
measurements in various industries and manufacturing
rugged and come with heavy duty clips for better grip on test object.
facilities. High accuracy makes it a reliable tool for Quality
The kit and accessories are housed in a trolley mounted casing for
Assurance and easy operation makes it a very handy tool for
easy transportation. Advanced Dot Net based software is provided
quick maintenance checks for process industries.
for data downloading, analysis and report generation. The instrument
can be operated through software from a remote location. Internal
memory is provided for onsite data storage. Typical resistance measurement applications are
Safety Standards
Technical Details CRM 100A
Safety : According to EN 61010 - 1
Power Supply
Accessories
Standard
Input Power 230V+ 10%, 50 Hz, 1 Phase
Output lead Set 4 X 5m
DC Test Current 10A, 20A, 50A & 100A
Mains Power Cord
Accuracy +0.5% + 5 digits
Mains Protection fuse 5A
Resolutions 0.1 A User Manual
Software CD
Resistance Measurement
USB Cord
Resistance Ranges 200µΩ 2m Ω 20mΩ
Operation Time
Continuous Operation up to 50A
Warning
Audio Visual Indication for Test ON Operation
Environment
Operating Temperature 0°C to 55°C
Physical
Weight 12 Kg (Approx)
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Features
4.3” Color TFT display with backlit
Resolution 0.1 μΩ on 2 mΩ range
Best Measurement Accuracy of +0.03 %
Mains cum Battery operated.
High measurement current (10A) for faster settling of
measured values on low resistance.
True 4 wire resistance measuring technique
Pulse Mode, Auto Hold Operation.
Bluetooth interface and cloud connectivity through
Motware app
Inbuilt thermal paper printer
Low Battery indication to prevent deep discharge of
internal recharging battery.
Temperature Measurement & Correction
Connected to Cloud
LR2065-S
Micro Ohm Meter
app for remote access of testing data & storage at cloud for further Low rating motors & transformers
analysis & record purpose. Weld Joints
Electrodes
Micro Ohm Meter - LR 2065S 42
Safety
Technical Details LR2065S Measurement Category: CAT II (1000V)/CAT III (600V)
Reinforced insulation
Relevant Standard Specifications: Safety According to
EN 61010-1,EMC According to EN 61326-1
Operating Temperature 0
0 C to 55 C 0
Power
Mains Power Supply Mains Input Voltage 110/230 Volt AC, 50/60Hz
Electrical Specifications
Test Current Injection 10A, 1A, 100mA, 10mA, 1mA, 100μA
Resistance Range
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Contact Resistance/Low Resistance Meter - LR 2045S 43
Features
Back-EMF Protection
Best Measurement Accuracy of 0.05% + 5 dgt
Resolution 1 μΩ on 20 mΩ range
Inbuilt Thermal Paper Printer
Temperature Measurement & Temperature Correction
Feature.
4.3“ Colour TFT Digit Large And Clear Display
Accurate & Stable Readings
Pc Interfacing With Software
4 Wire Measurement Method
Sealed Soft Touch Membrane Keypad
Bluetooth Interface And Cloud Connectivity Through
Motware App
Connected to Cloud
LR 2045S
Micro Ohm Meter
Applications
Hot & Cold Winding Resistance Measurement of Motors,
The Motwane LR 2045S capable of measuring low resistance with 1
Generators, Alternators, and Transformers.
micro-ohm resolution. It employs the proven 4-wire (4W)
Contact Resistance Measurement of Fuses and
measurement where fixed DC current is supplied to DUT and voltage
Miniature Circuit Breakers.
drop across the DUT is measured and displayed as proportional
Resistance Measurement of Cables & Wires.
resistance reading. The meter is able to deliver guaranteed stable
readings on inductive as well as resistive loads.
Contact Resistance/Low Resistance Meter - LR 2045 44
Safety
Technical Details LR 2045S Measurement Category: CAT II (1000V)/CAT III (600V)
Reinforced insulation
Relevant Standard Specifications: Safety According to
EN 61010-1, EMC According to EN 61326-1
Temperature Channel 1
Physical Specifications:
Printer Built in Thermal Printer
Dimensions : 360.68 mm (L) X 289.56 mm (W) X 165.1 mm (H)
PC Interface USB Net Weight : 8.0kg (Approx)
Accessories
Indications
Standard
4.3” Color TFT with backlit or range and Ω/mΩ indications.
Test Lead set 10meter : 1 Set.
LED indication for operation and pulse mode. Mains Power Cord : 1 No.
Mains Protected Fuse : 1 No.
Over range indication: Blinking zero display.
Thermal Paper roll : 1 No.
Under Range Indication: All Display shows zero. (Not blinking) Instruction Manual : 1 No.
Calibration Certificate : 1 No.
Optional
Technical Specifications :
USB cable : 1 No.
MAX ACCURACY Temperature measurement probe : 1 No.
Range Resolution
CURRENT ± (%RDG + DIGITS)
20mΩ 1μΩ 1A ± 0.05 % of reading ± 5 digits Note : To learn more about the Motware Application, check Page 91
Note : Accuracies are valid from 1/10th of the range to FS of range & valid
50/60Hz
Environmental Specifications:
(Non Condensing)
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Protection Testing - HVT Series 45
Features
Variable Output Voltage AC/DC/AC+DC
Selectable Trip Current
Zero Start Interlock
Timer to set duration of test
Audio/Visual Indications
Overload Protection
High Leakage Current Range
Supply Fault / Earth Open Interlocking Door / Cabin
Door Interlock
Wheel mounted for easy transportation
Applications
Dielectrics (insulation) for electrical equipment and
apparatus is used for many different applications. It is
expressed for a wide range of environmental conditions
HVT Series such as temperature, moisture, chemicals, other
AC-DC Hi Pot Test Set contaminants, and exposure to weather. One major factor
affecting insulation life is thermal degradation, although
moisture, contamination, voltage stress, and other factors
The Motwane's Hi-Pot Tester, HVT series offers a wide range of test
may also contribute to its degradation. In addition, the life of
voltages to determine the withstand strength of electrical insulation
an insulating material depends on the degree of loading, the
for the normally occurring over voltage transients. HVT series sets
type of service to which the equipment is subjected, the
are available in a wide range of voltage and power ratings with
care it receives during installation and operation, and
exceptional reliability, durability and functionality which can
mechanical vibration and forces to which it is subjected.
generate AC, DC or AC+DC voltages (eliminates the need of two
separate kits). Available with manual / motorized controlled A dielectric withstand test is an electrical test performed on
operation provides variable output voltage. Test sets had selectable a component or product to determine the strength of
tripping current to identify breakdown voltage of different test insulation. Voltage applied between equally insulated
objects and also have timer, useful to set duration of test period. HVT sections of a part or energized parts and electrical ground
series is provided with HV indication, supply fault / earth open under test and determining the leakage current that may
interlocking & door / cabin interlocking & overload protection flow under test conditions. Excessive leakage current flows
provided for safety of operator & test set. may indicate a deteriorated condition or impending failure
of the insulation. Insulation testing can be performed by
applying either direct current (DC) voltage or alternating
current (AC) voltage The test to qualify a device's ability to
operate safely during rated electrical conditions. If the
current through a device under test is less than the specified
limit at the required test potential and time duration, the
device meets the dielectric withstand requirement. A
dielectric withstand test may be done as a factory test on
new equipment, or may be done on apparatus already in
service as a routine maintenance test.
Technical Specification
Output Voltage 5KV 10KV 15KV 20KV 30KV 40KV 50KV 70KV
Burden at 50mA 0.25KVA 0.5KVA 0.75KVA 1KVA 1.5KVA 2KVA 2.5KVA 3.5KVA
Burden at 100mA 0.5KVA 1KVA 1.5KVA 2KVA 3KVA 4KVA 5KVA 7KVA
Voltage Meter 0.-5KV 0.-10KV 0-15KV 0-20KV 0-30KV 0-40KV 0-50KV 0-70KV
Protected by MCB,
Protection and
Fuse Zero Start Interlock
Safety
Earth Open/ Supply Fault Interlock, Door/ Cabin Interlock
Operating
0-55°C, 5-90% RH Non Condensing
Temperature
*We also provide customized High voltage test set as per requirement
Ordering Information
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes continuous improvement of its product. We, therefore,
reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Protection Testing - MOT-RTS 47
Features
Compact unit with rugged case
Variable model and selectable Output Current
up to 200A/600VA
Output Voltage 0-250V AC/DC
Auto Cut-Off upon Tripping Relay
Timer Range 0.0001-9999 Seconds Auto Ranging ,
Digital Timer with Accuracy +0.05% + 2 Counts
Wheel mounted for easy transportation
MOT - RTS
Relay Test Set
The Motwane's RTS Series also known as kit is a portable, cost Applications
effective is portable cost effective solution to test voltage & current
The secondary current injection test of solid-state units
based relays. It is designed with highly accurate digital meters for
can be performed by a specially designed power supply
testing of protective devices. The MOT-RTS set provides high burden
unit. Secondary injection tests are always done prior to
to test electromechanical relays. RTS Series can provide up to 200A
primary injection tests. The purpose of secondary injection
for CT, MCB Testing. The compact & rugged design makes it easy to
testing is to prove the correct operation of the protection
move in relay room.
scheme that is downstream from the inputs to the
protection relay(s). This is because the risks during initial
testing to the LV side of the equipment under test are
minimized. It should be noted that the secondary current
injection method only tests the solid-state trip unit logic
and components like relay, miniature breaker etc.
Ordering Information
MOT-RTS10/200 10A Relay Test Set
Technical Specification
Selectable Current
0-1-5-10-25-
Ranges (O/P current 0-1-5-10A 0-1-5-10-20A 0-1-5-10-25-50A 0-1-5-10-25-50-100A
display on % Ammeter)
50-100-200A
Voltage resolution 1V
Protection and Safety Fast blow glass fuse Over current tripping
PVC insulated 2.5 sq. PVC insulated 10 sq. mm PVC insulated 16 sq. PVC insulated 25 sq. PVC insulated 50 sq.
Output Current leads mm cu cables 2X1.5mtr cu cable 2X1.5mtr lug mm cu cable 2X1.5mtr mm cu cable 2X1.5mtr mm cu cable 2X1.5mtr
lug at both ends at both ends lug at both ends lug at both ends lug at both ends
Accessories
Standard
PVC insulated 2.5 Sq.mm Cu cable 2 corex4 mtrs one Calibration Report
side banana plug & other side small crocodile clip - 1 no Warranty Certificate
Instruction Manual
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Protection Testing - PIK Series 49
Features
Variable Output Current
High VA burden to test high impedance objects
Digital timer for measuring tripping time
Zero Start Interlock for safety
Auto Cut-Off upon Tripping Relay
Current range ( Low - 50% & High - 100% of full range )
CT sec current measurement (Optional)
CT Polarity Detection (Optional)
Wheel mounted for easy transportation
MOT-PIK3000/20 Primary Current Injection Kit : 3000A with 20kVA Burden Optional Features
Technical Specification
Output Current 0-200A 0-500A 0-800A 0-1000A 0-1500A 0-2000A 0-2500A 0-3000A
O/P Resolution 1A
Unit Combined control & loading unit Separate control & loading units
Standard 50 mm2 120 mm2 180 mm2 240 mm2 400 mm2 480 mm2 600 mm2 720 mm2
Output Cables (2X5) meters (2X5 ) meters (2X5 ) meters (2X5) meters (2X7) meters (2X10) meters (2X10) meters (2X10) meters
Accessories
Standard Optional
Spare Fuse
Short Link
Instruction Manual
Calibration Certificate
Warranty Certificate
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
High Voltage Detectors 51
Features
Non-contact / Contact type Detectors.
Type tested at CPRI/ERDA
Complies IS 2071 (Part-I) and IS 13770: 1993 for FRP
Sectional Hot Stick Rod.
Available in FRP Telescopic Rod / FRP Sectional Hot Stick
Rod in 1.2 / 3 / 5 mtr.
Colour Code models for different voltage levels.
Indicates presence of High Voltage by Audio
Annunciations as well as Visual Indications.
Bright high intensity red LED's provide clear visual
Bullet even in unfavourable daylight conditions.
A Buzzer produces a loud beep which is audible even in
noisy backgrounds.
Supplied as a complete kit with HV Detector, Telescopic
Fibre Glass Insulation stick and ergonomically designed
sturdy carry bag.
Self test button to test battery and proper functioning
of HV detector.
Powered by a single 9V battery type (6F22), easily
replaceable on field.
Universal Link
High Voltage Detectors 52
Technical Specification
Voltage Range 230V - 33kV 3.3kV - 33kV 11kV - 132kV 33kV - 220kV 66kV - 440kV
Type Non Contact Non Contact Contact/Non Contact Contact/Non Contact Non Contact
Sensing Distance - - 1mtr - 3mtr - 5mtr 1mtr - 3mtr - 5mtr 1mtr - 3mtr - 5mtr
General Specifications
High Voltage Indication
RED LEDs start flashing with an audible buzzer if taken into High Voltage induction area.
Electrical Specifications
Visual Indication High Bright LEDs flashing Material Fibre Glass (Sturdy & Rugged)
Audible Indication Buzzer beeps Loudly Length Telescopic Extendable length 3 mtrs.
Environmental Specifications
Recommended Operating Physical Specifications
Temperature Range 5°C to 50°C Length 245mm Approx.
Accessories
Standard
Carrying Bag
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Earth/Ground Tester - DET20 53
Features
3 ½ digit LCD Display with max reading 1999.
3 terminal and 4 terminal Measurement Method
Earth Resistance Range 0.01Ω to 1999Ω
4 Soil Resistivity Measurement
Rechargeable Internal Ni-MH Battery
Earth Measurement Voltage up to 200V
Ratio Metric Synchronous Rectification
Applications
The integrity of the grounding system is very important in
an electrical power system for the following reasons:
Accessories
Technical Details DET 20
Standard
operation on mid-range.
Interference
Interference voltage of 20V +5% peak to peak, 50Hz in the potential circuit will
have a maximum effect +1% on the reading obtained form 20 Ω to 2KΩ ranges.
Influence of Temperature
<+0.2% per0 C over the temperature range 0-200C and 28-550C.
Temperature Range
Operating : 00C to +550C <90% RH
Humidity
Voltage withstand
In the event of as system fault, the instrument will withstand 240V AC, applied
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Earth/Ground Tester - DECT 3 55
Features
Clamp-on Ground Resistance Tester
55*32mm jaw size for larger ground rods.
Autoranging ground resistance measurement from 0.01
to 1000 ohms with 0.001-ohm resolution
AC leakage current range from 0.05mA to 30A with
0.05mA resolution.
Configurable alarm value in resistance and current to
support your measurement
Ergonomic mold, full rubber coating, and hand strap for
slip-proof
Datalogging with 99 data points
Verification resistor confirms the accuracy of the meter
Complete with heavy-duty case and verification resistor
DECT 3
Digital Clamp on Earth Resistance Tester
Applications
Motwane's new Digital Clamp on Earth resistance Tester, DECT-3
Clamp on measurement method is new and quite unique. It
measures earth resistance using clamp on technology. Clamp on is a
offers the ability to measure the Earth Resistance without
relatively new method of determining the quality of a ground system.
disconnecting the ground. This type of measurement also
DECT-3 can measure Earth Resistance, earth bonds measurement &
offers the advantage of including the bonding to ground
also measures AC leakage current. It's actually recommended to use it
and the overall grounding connection resistances and also
on sites where there are multiple grounds placed in parallel and not
indispensable troubleshooting tools to help you maintain
required to isolate the ground rod. Simply clamp around the
uptime. It is recommended that all grounds and ground
conductor or earthing strip and measure the Earth Resistance fast and
connections be checked at periodically as a part of normal
accurately. The unique big jaw is particularly suitable where
predictive maintenance plan. If there is an increase more
grounding is done by flat steels or copper strips. It has low battery
than the acceptable limit during these periodic checks, the
indication & data hold facility within built memory storage of up to 99
engineer should investigate the source of the problem and
test results. DECT-3 has got the double insulation level and is
make the correction to lower the resistance by replacing or
protected from external magnetic & electric fields.
adding ground rods to the ground system.
Memory 99 sets
Accessories
Standard
Standard Loop Resistance of 5.1Ω
Instruction Manual
Carrying Case
Calibration Certificate
USB
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes continuous improvement of its product. We, therefore,
reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Features
CLAMP-ON GROUND RESISTANCE TESTER
65*32mm jaw size for larger ground rods
Autoranging ground resistance measurement from 0.01
to 1000 ohms with 0.001-ohm resolution.
Configurable alarm value in resistance and current to
support your measurement.
Ergonomic mold, full rubber coating, and hand strap for
slip-proof.
Datalogging with 99 data points.
Verification resistor confirms the accuracy of the meter.
Complete with heavy-duty case and verification resistor
DECT 2
Digital Clamp on Earth resistance Tester
Applications
Clamp on measurement method is new and quite unique. It offers the
Clamp on measurement method is new and quite unique. It
ability to measure the earth resistance without disconnecting the
offers the ability to measure the earth resistance without
ground. This type of measurement also offers the advantage of
disconnecting the ground. This type of measurement also
including the bonding to ground and the overall grounding
offers the advantage of including the bonding to ground
connection resistances and also indispensable troubleshooting tools
and the overall grounding connection resistances and also
to help you maintain uptime. It is recommended that all grounds and
indispensable troubleshooting tools to help you maintain
ground connections are checked periodically as a part of a normal
uptime. It is recommended that all grounds and ground
predictive is seen maintenance plan. If an increase in resistance of
connections be checked periodically as a part of normal
more than acceptable limit during these periodic checks, the engineer
predictive maintenance plan. If an increase in resistance of
should investigate the source of the problem and make the correction
more than acceptable limit during these periodic checks,
to lower the resistance by replacing or adding ground rods to the
then the engineer should investigate the source of the
ground system.
problem and make the correction to lower the resistance by
replacing or adding ground rods to the ground system.
Memory 99 sets
Accessories
Standard
Standard Loop Resistance of 5.1Ω
Instruction Manual
Carrying Case
Calibration Certificate
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Digital Multimeter - M63 59
Features
6000 Count LCD display with pleasant white backlit.
AC/ DC Current range upto 20A.
Resistance, Capacitance, Diode & Continuity
Measurement Facility.
Selectable Frequency & Duty Cycle Measurement.
60 position analog bar graph for trend indication.
Highly Linear Readings.
Select, Range, Hold/Light, Rel, Hz/duty.
Max/Min functions incorporated
Safety - CE, CAT IV(600V), IP 54, EN61326-1 & IEC 61010-1
Robust, Rugged & Double Mould Casing.
M63
Digital Multimeter Industrial Graded
CAT iV IP Applications
600V 54 Power Utility
Industries
The Motwane’s Terms Industrial Graded Digital Multimeter M63 is Electrical Contractor
specially designed in our research laboratory & went under stringent
Telecommunication
manufacturing process for a wide range of applications like Power
Railway
Generation, Power Distribution, Power Transmission, Steel Industries,
Defence
Cement Industries, Mining Industries, Power Electronics Industries,
Heavy Engineering Industries and Defence Sector & Aviation Sector.
M63 is a versatile and high-performance industrial grade multimeter
that complies with IEC 61010-1-2010 safety standards and excellent
noise immunity to disturbances from energized power lines, with CE,
CAT IV 600 V safety rating IP-54 protection.
Digital Multimeter - M63 60
General
Display 6,000 Count LCD display with white backlit.
Environmental
Power
Power Supply 9V Battery Type 6F22 or equivalent
consumption is 300µA approx. (Can be cancelled by pushing SELECT key before power on the meter).
Overload Protection:
Fuse Protection for ‘mA’ input terminal 0.75 A/ 0.8 A/ 500V fast blow type ceramic fuse.
Fuse Protection for 20A input terminal 20A/ 500V fast blow type ceramic fuse
Safety
Accessories
Standard Accessories
Pair of Test leads, User Manual, Battery installed, Fuses, Carrying Bag.
DC Voltage
Range Resolution Max. Reading Accuracy Overload Protection
6V 1 mV 6.000 V +(0.5% + 3)
AC Voltage (50Hz-500Hz)Trms
Range Resolution Max. Reading Accuracy Overload Protection
6V 1 mV 6.000 V +(1% + 5)
DC ‘mV’ Range
Range Resolution Max. Reading Accuracy Overload Protection
60 mV 0.01 mV 60.00 mV +(0.5% + 3)
1000V DC/AC rms
600 mV 0.1 mV 600.0 mV +(0.5% + 3)
DC Current Range
6A 1 mA 6.000 A +(1% + 5)
20A/500V DC/AC
Note : 1. 10A for continuous 2. >10A for 20sec. after 15min. cool down interval
6A 1 mA 6.000 A +(1.2% + 5)
20A/500V DC/AC
Note : 1. 10A for continuous 2. .>10A for 20sec. after 15min. cool down interval
Resistance Range
Range Resolution Max. Reading Accuracy Overload Protection
600 Ω 0.1 Ω 600.0 Ω +(0.5% + 3)
6 KΩ 1Ω 6.000 Ω +(0.5% + 3)
60 KΩ 10 Ω 60.00 K Ω +(0.5% + 3)
1000V DC/AC rms
600 KΩ 100 Ω 600.0 K Ω +(0.5% + 3)
6 MΩ 1KΩ 6.000 M Ω +(1% + 5)
60 MΩ 10 K Ω 60.00 M Ω +(3% + 5)
Note : 1. Open Circuit Voltage on 600 -6M ranges is 0.62V DC approx. 2. Open Circuit Voltage on 60M range is 0.31V DC approx
Digital Multimeter - M63 62
Continuity Test
Range Resolution
Accessories
Standard
Pair of Test leads, User Manual, Battery installed, Pair of test leads.
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Digital Multimeter - M65 63
Features
6,000 Count LCD Dual display with white backlit.
Auto ranging, terms AC Voltage & Current measurement.
Basic DCV Accuracy of 0.25%.
Highly Linear Readings.
Capacitance Range upto 60mF.
Resistance, Diode and Continuity Measurement Facility
Selectable Frequency & Duty Cycle Measurement.
60 position analogy bar graph for trend indication.
Select, Range, Hold, Rel, Lights, Max/Min
Functions Incorporated.
CE and IEC 61010-1 CAT III (1000V), IP 54 protection.
Robust, Rugged and Double Mould Casing.
M65
Digital Multimeter
Accuracy
Accuracy is valid from 10% of range to 95% of the range.
Accuracy is specified as + % of reading + digits and is valid at 25 + 30C, < 55% RH Humidity.
It is recommended that calibration equipment used to verify the accuracy of the instrument should be 10 times more accurate.
Temp. Coefficient = (0.1% x Specified accuracy) per degree centigrade referred to 25°C. Accuracy is not valid if display shows ' LO BAT'.
General
Dual Display For AC Voltage with Frequency & Frequency with Duty Cycle simultaneously
Environmental
Operating Temperature 0°C to 50°C
Power
Power Supply 9V Battery Type 6F22 or equivalent
Overload Protection
Fuse Protection for ‘µA’ & ‘mA’ input terminal 0.8 A/ 250V fast blow type ceramic fuse.
Fuse Protection for 10A input terminal 20A/ 500V fast blow type ceramic fuse
Safety
Accessories
Standard Accessories
Pair of Test leads, User Manual, Battery installed, Fuses, Carrying Bag.
Digital Multimeter - M65 65
Optional Accessories
Pair of test leads, Pair of small test leads
6V 1 mV 6.000 V +(0.25% + 3)
Note: 1. Input Impedance 10M approx. 2. 600mV Range will be displayed in manual ranging only (Unspecified accuracy).
6V 1 mV 6.000 V +(1% + 5)
Note : 1. Input impedance : 10 MΩ approx. shunted by 60pF approx. 2. 600mV Range will be displayed in manual ranging only (Unspecified accuracy).
3. Main display shows AC Voltage & sub display shows frequency applied.
DC Current Range
Range Resolution Max. Reading Accuracy Overload Protection
Note: Main display shows AC Current and sub display shows frequency applied.
Resistance Range
Range Resolution Max. Reading Accuracy Overload Protection
6 KΩ 1Ω 6.000 Ω +(0.5% + 3)
60 KΩ 10 Ω 60.00 KΩ +(0.5% + 3)
440V DC/AC rms
600 KΩ 100 Ω 600.0 KΩ +(0.5% + 3)
6 MΩ 1 KΩ 6.000 MΩ +(1% + 5)
Note : 1. Open Circuit voltage on 600Ω range is -3.3V DC approx. 2. Open Circuit voltage on 6kΩ-6MΩ ranges is -1.10V DC approx.
Note : 1. Settling time on 6mF and 60mF range is 40 sec. approx. 2. Press REL button at 6nF & 60nF ranges so that the offset count can be subtracted
Diode Test
Range Resolution Open Circuit Voltage Test Current
6V 1mV <3.0 V DC approx. <2.0mA approx.
Continuity Test
Range Resolution
600.0Ω 0.1Ω Meter Beeps < 20Ω
Note: 1. Main display shows frequency & sub display shows Duty Cycle. 2. If input frequency is less than 6.0Hz, display will show 0.00Hz.
Accuracy is specified at <20 VAC rms Sensitivity : 60Hz to 600 KHz > 3 Vrms, 6 MHz to 60MHz > 5Vrm, 1.00% -98.9% < 10KHz at 3 Vrms
Electromagnetic compatibility: In RF Field, overall accuracy is equal to 10% of reading +30 digits
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Digital Clamp Meter - DCM49A 67
Features
True RMS reading for ACV & ACA
AC/DC Current measurements up to 1000A
Auto Ranging 3 ¾ digits (6000) LCD-Display Bargraph.
2 in 1 Clamp Meter + Digital Multimeter.
Overload protection for all ranges.
DCM-49A
DCM49A
Digital Clamp Meter
CAT II Applications
600V
Generation, Transmission & Distribution
Substation Process Industries.
Motwane's Digital Clamp Meter DCM 49A is highly precise, industrial
OEM's
grade, Trms, auto ranging clamp meters with 3 ¾ digit display. This Railway's
clamp meters can be used as multimeter with test leads for AC/DC Telecom Industries
Current measurements up to 1000A, AC/DC Voltage, Resistance,
Service Industries
Frequency, Capacitance, Duty Cycle and Diode, Continuity etc. This
clamp meters are provided with safety features like water resistant
front panel, fireproof heavy-duty ABS casing. It uses a Hall Effect
Sensor for measuring the current.
Digital Clamp Meter - DCM49A 68
General
Display 3 ¾ Digits LCD display, 6000 Count
Power
Power Supply 3*AAA 1.5V Alkaline Batteries
Standard Accessories Pair of Test leads, User Manual, 3*AAA 1.5V Alkaline Batteries
600 A 0.1 A VFD : + (5.0% reading+10) 600 A 0.1 A ±(2.5% reading +8)
INRUSH : +(5.0% reading+10)
1000 A 1A 1000 A 1A
AC Voltage DC Voltage
Range Resolution Accuracy Range Resolution Accuracy
Input Impedance : 10MΩ (Approx) | Frequency Response : 45Hz - 1KHz Capacitance Range
Duty Cycle
Range Accuracy
1% - 99% + 1% + 5dgt
Temperature (0C / 0F )
Range Accuracy Range Accuracy
Frequency
Range Resolution Accuracy
10 HZ 0.001 Hz
100HZ 0.01 Hz
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Digital Clamp Meter - DCM30A 70
Features
AC Current measurements up to 1000A,
Auto Ranging 3 ¾ digits (6000) LCD-Display.
True RMS reading for ACV & ACA
2 in 1 Clamp Meter + Digital Multimeter.
Overload protection for all ranges.
Data Hold, Min/Max Hold
Water Resistant front panel, Fireproof heavy-duty
ABS Casing.
Current Sensor-Hall Effect Sensor
Over Range Indication: 'OL' is displayed.
Max Conductor size 60mm approx.
3*AAA Alkaline Batteries
Double Colour backlight
Flashlight
Temperature measurement
Non Contact Voltage detector (NCV)
with LED indication & Buzzer Sound.
DCM 30A
Digital Clamp Meter
Motwane's Digital Clamp Meter DCM 30A is highly precise, industrial Applications
grade, Trms, auto ranging clamp meters with 3 ¾ digit display. This
clamp meters can be used as multimeter with test leads for AC Generation, Transmission & Distribution
Current measurements up to 1000 A, AC/DC Voltage, Resistance, Substation Process Industries.
Frequency, Capacitance, Duty Cycle and Diode, Continuity etc. This OEM's
clamp meters are provided with safety features like water resistant Railway's
front panel, fireproof heavy-duty ABS casing. It uses a Hall Effect Telecom Industries
Sensor for measuring the current.
Service Industries
Digital Clamp Meter - DCM30A 71
General
Display 3 ¾ Digits LCD display, 6000 Count
Power
Power Supply 3*AAA 1.5V Alkaline Batteries
Standard Accessories Pair of Test leads, User Manual,3* AAA Batteries 1.5V
1000 A 1A
AC Voltage DC Voltage
Range Resolution Accuracy Range Resolution Accuracy
Input Impedance : 10MΩ (Approx) | Frequency Response : 45Hz - 1KHz Input Impedance : 10MΩ (Approx)
10mF 0.001 mF
Duty Cycle
Range Accuracy
1% - 99% + 3% + 3dgt
Temperature (0C / 0F )
Range Accuracy Range Accuracy
Frequency
Range Resolution Accuracy
10 HZ 0.001Hz
100HZ 0.01Hz
1 KHZ 0.1Hz
1 MHZ 0.1kHz
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
Digital Clamp Meter - DCM 39A/9930A 73
Features
Auto Ranging 3 ¾ digits (3999) LCD-Display.
True RMS reading for ACV & ACA
2 in 1 Clamp Meter + Digital Multimeter.
Overload protection for all ranges.
Data Hold, Relative Key Facility
Water Resistant front panel, Fireproof heavy-duty
ABS Casing.
Current Sensor-Hall Effect Sensor
Over Range Indication: 'OL' is displayed.
Max Conductor size 60mm approx.
Power – one 9V battery type (6F22)
DCM 39A/9930A
Digital Clamp Meter
Motwane's Digital Clamp Meter DCM 39A & DCM 9930A are highly Applications
precise, industrial grade, Trms, auto ranging clamp meters with 3 ¾
digit display. Both these clamp meters can be used as multimeter Generation, Transmission & Distribution
with test leads for AC/DC Current measurements up to 400 mA, Substation Process Industries.
AC/DC Voltage, Resistance, Frequency, Capacitance, Duty Cycle and OEM's
Diode, Continuity etc. These clamp meters are provided with safety Railway's
features like water resistant front panel, fireproof heavy-duty ABS Telecom Industries
casing. It uses a Hall Effect Sensor for measuring the current. The
Service Industries
model DCM 39A measures AC/DC currents up to 1000A. The model
DCM 9930A measures AC/DC currents up to 2000A.
Digital Clamp Meter - DCM 39A/9930A 74
General
Display 15 mm (0.6") LCD, 4 digits max indication 5000
Power
Standard Accessories
Pair of Test leads, User Manual, One 9V Battery installed
Overload Protection : AC/DC 500mA(Fuse) | AC/DC 1000A/1000V | Frequency Response : 45Hz - 1KHz
4V 0.001 V + 1% + 2dgt
1000V DC OR 1000V
40V 0.01 V + 1% + 2dgt
AC rms (Sine wave)
400V 0.1 V + 1% + 2dgt
AC Voltage
Range Resolution Accuracy Overload protection
Resistance Range
Range Resolution Input Accuracy
4 KΩ 1Ω + 1% + 5dgt
40 KΩ 10 Ω + 1% + 5dgt
400V DC/AC RMS (Sine wave)
400 KΩ 100 Ω + 1% + 5dgt
4MΩ 1 KΩ + 2% + 2dgt
40 M 10 K + 3.5% + 5dgt
Capacitance Range
Range Resolution Input Accuracy
Amplitude : < 5V
Duty Cycle
Range Resolution Accuracy Overload protection
1% - 99% 0.1% + 1% + 5dgt 1000 V AC/DC
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
range to 95% of the range. 5. Accuracy specified for temperature range of 250C + 50C & 55% RH + 10%.
76
Telemetrics Is Now Part of Motwane Group
LT NETWORK EQUIPMENT
( Low Voltage Network 1.1KV )
MV NETWORK EQUIPMENT
( Medium Voltage Network 11KV )
Cable Fault Detection Steps Equipments
Diagnosis Multimeter & Insulation Tester
Pre-locator Cable Fault Pre-locator TFL 8
Cable Route Tracer Cable Route Tracer CRT 10D
Surge Tester System HV Surge tester SWT 16D &
( Thumper + Receiver ) Surge Wave Receiver SLE 90
HT NETWORK EQUIPMENT
( High Voltage Network 33KV )
Cable Fault Detection Steps Equipments
Diagnosis Multimeter & Insulation Tester
Pre-locator Cable Fault Pre-locator TFL 8 / TFL 9
Cable Route Tracer Cable Route Tracer CRT 10D
Surge Tester System HV Surge tester SWT 32 / SWT 32D &
( Thumper + Receiver ) Surge Wave Receiver SLE 90
Rugged construction.
Rugged construction.
80
Rugged construction.
81
Model : SLE 90
Features :
For pin-pointing of cable faults by acoustics and
magnetic method.
High accuracy.
Mute operation.
82
Rugged construction.
84
Rugged construction.
Model : CBD 7
Features :
Burn down high resistance / unstable faults to
alter fault condition.
Rugged construction.
86
Features :
TDR mode
Features :
Three work modes selectable, TDR, ICM & SIM
PC Compatibility.
HT Network
Touch-sensitive display.
Rugged construction.
Rugged construction.
89
Model : LOCOMP
LT Network Up to 1.1 kv
Features :
Compact system for Pre-location and Pin-pointing
the faults in LT / HT cables.
Consisting of :
Features :
92
Features :
DC testing upto 80kV – 25mA
www.motwane.com
National : 03/01/2023
Toll-free number:
1800 233 7766
https://www.linkedin.com/company/motwanemanufacturing