Professional Documents
Culture Documents
Page 1/3
General properties
Chemical basis Aqueous dispersion of PU-micro-encapsulated components
Ionicity Slightly cationic
Form supplied White liquid
Density (20 °C) approx. 1,00 g/cm³
Viscosity (20 °C) approx. 800 mPa·s
pH (20 °C) approx. 5
Dissolving Can be dispersed in water in any ratio
General
TANA®CARE is an innovative product line to enrich every kind of fibre, in a wide scale of active
cosmetic ingredients, chosen to satisfy new trends and needs of our customers. TANA®CARE
products can be used like a common finishing product, suitable in padding processes. TANA®CARE
products do not impair the characteristics of the substrate, and are also suitable for using in the
same bath with softeners, fluorocarbon resins, resin finishing (PERSOFTAL®, BAYPRET®, EDOLAN®,
BAYGARD® range), depending of the required finishing effect to be obtained.
TANA®CARE ALOE VERA is a microencapsulated product, based on carefully selected raw materials.
Our choice was to select natural essences, such as the Aloe Vera vegetal extract. The ALOE VERA
plant is rich of various components and depending on the processing of extraction and purification,
the juice can be used for a multitude of applications and has a lot of properties useful for your skin
as anti-inflammatory, muscle pain reliever, moisturiser, anti-aging, antioxidant, immune system
restoration, etc.
Product Information | TANA®CARE ALOE VERA
Page 2/3
Amounts required
Padding application
TANA®CARE ALOE VERA is suitable in padding applications, from 20 to 80 g/l depending on the
required effect and uptake. In order to obtain handle modifications, it is possible to add other
finishing products (PERSOFTAL®, BAYPRET®, EDOLAN®).
Preliminary trials are always recommended.
Increased durability
Micro-encapsulated products always have a rather limited wash-durability. TANATEX has the
advantage of having an unique product like TANA®PUR ONE in the product-range. This product is
capable of increasing the wash-durability of TANA®CARE brands with at least 10 additional washes.
Page 3/3
Storage stability
The product should be protected from frost: once frozen, the product will lose its quality properties
and cannot be used anymore. The product is sensitive to high temperatures, to protect the quality
and application aspects the product should be stored in a cool place at maximum of 40°C. To
guarantee its performance it is important to stir the product well before use. If there is a film
present on the surface, do not remove it, but dissolve it by stirring slowly. When stored under
prescribed storage conditions we guarantee a minimum shelf life of 24 months. Once the shelf life
has expired, please contact us.
Note on safety
Information on handling and ecological and toxicological behaviour is contained in the safety
data sheet for TANA®CARE ALOE VERA
Specifications
For further details, please refer to the product specification for TANA®CARE ALOE VERA.
Edition: 2021-03-03