You are on page 1of 12

CÂU HỎI TRẮC NGHIỆM MARPOL 73/78

Giảng viên soạn Th.s Bùi Thế Anh


Điện thoai : 0977752266
Email : anh.bui@ut.edu.vn
Câu 1: What is the purpose of MARPOL 73/78 Annex I?
 To prevent marine pollution by oil from ships.

 To prevent marine pollution by garbage from ships.

 To prevent marine pollution by sewage from ships

 To prevent marine pollution by chemicals from ships

Câu 2: What is the minimum gross tonnage required for a ship


to be subject to Annex I regulations?
 100 gross tonnage

 200 gross tonnage

 300 gross tonnage

 400 gross tonnage


Câu 3: What is the maximum permitted oil content of bilge
water under Annex I?
 5 parts per million

 10 parts per million

 15 parts per million

 20 parts per million

Câu 4: What is the minimum distance from land for a ship to


discharge oil in accordance with Annex I?
 3 nautical miles

 6 nautical miles

 9 nautical miles

 12 nautical miles
Câu 5: What is the maximum permitted oil content of effluent
from an Oil Filtering Equipment under Annex I?
 5 parts per million

 10 parts per million

 15 parts per million

 20 parts per million

Câu 6: What is an Oil Record Book used for?


 To record all transfers, discharges, and retention of oil on
board a ship
 To record all garbage discharges from a ship

 To record all sewage discharges from a ship

 To record all chemical discharges from a ship


Câu 7: What is the purpose of an Oil Discharge
Monitoring and Control System (ODMCS)?
 To measure the oil content of bilge water
 To monitor the discharge of oil from a ship
 To prevent oil spills during oil transfers
 To filter oil from effluent water

Câu 8: What is the minimum required distance between


the inner bottom of a tanker's cargo tank and the outer
bottom of the ship's hull under Annex I?
 600 mm
 900 mm
 1200 mm
 1500 mm
Câu 9: What is a Segregated Ballast Tank used for?
a) To store oily wastes on board a ship
b) To prevent oil pollution in the event of an accident
c) To store clean ballast water on board a ship
d) To store sewage on board a ship

Câu 10: What is the minimum thickness required for the


steel used in a tanker's cargo tank under Annex I?
a) 5 mm
b) 6 mm
c) 7 mm
d) 8 mm
Câu 11: What is the maximum permitted oil content of ballast
water under Annex I?
a) 5 parts per million
b) 10 parts per million
c) 15 parts per million
d) 30 parts per million

Câu 12: What is the purpose of a Shipboard Oil Pollution


Emergency Plan (SOPEP)?
a) To prevent oil pollution from a ship
b) To respond to oil spills from a ship
c) To monitor the discharge of oil from a ship
d) To record all transfers, discharges, and retention of oil on
board a ship
Câu 13: What is the minimum distance from any discharge
point for a ship to test its Oil Discharge Monitoring and
Control System (ODMCS) under Annex I?
a) 3 nautical miles
b) 6 nautical miles
c) 9 nautical miles
d) 12 nautical miles
Câu 14: What is a Ship-to-Ship (STS) transfer used for
under Annex I?
a) To transfer oil from a ship to a tanker truck
b) To transfer oil from a tanker to a ship
c) To transfer oil between two ships at sea
d) To transfer oil from a ship to an offshore platform
Câu 15: What is the maximum permitted oil content of cargo
tank slops under Annex I?
a) 5 parts per million
b) 10 parts per million
c) 15 parts per million
d) 20 parts per million
Câu 16: What is the minimum required number of Officer in
Charge of a Navigational Watch (OICNW) to be trained in oil
tanker operations under Annex I?
a) 1
b) 2
c) 3
d) 4
Câu 17: What is the purpose of a Cargo Record Book used for
under Annex I?
a) To record all transfers, discharges, and retention of oil on
board a ship
b) To record all garbage discharges from a ship
c) To record all sewage discharges from a ship
d) To record all chemical discharges from a ship
Câu 18: What is the minimum required thickness of the steel
used in a ship's cargo piping system under Annex I?
a) 3 mm
b) 4 mm
c) 5 mm
 6 mm
Câu 19: What is the purpose of an Oil Discharge Monitoring and
Control System (ODMCS) alarm under Annex I?
a) To alert the crew if the oil content of bilge water exceeds the
permitted limit
b) To alert the crew if the oil content of effluent from Oil Filtering
Equipment exceeds the permitted limit
c) To alert the crew if the oil content of ballast water exceeds the
permitted limit
d) To alert the crew if the ship's cargo tank is overfilled
Câu 20: What is the minimum distance from any discharge point for a
ship to operate its Oil Filtering Equipment under Annex I?
a) 3 nautical miles
b) 6 nautical miles
c) 9 nautical miles
d) 12 nautical miles
 HẾT RỒI

 MAI HỌC TIẾP NHA

You might also like