Professional Documents
Culture Documents
FDVGFF
FDVGFF
Full Output
Note: Section Designed to Eurocodes, United Kingdom National Annex
Construction Stage: PASS Max Unity Factor: 0.14
Normal Stage: PASS Max Unity Factor: 0.31
Fire Condition: PASS Max Unity Factor: 0.00
Serviceability: SATISFACTORY Max Unity Factor: 0.19
*** Section Adequate ***
Floor Plan Data (unpropped composite construction with ComFlor 46/1.2/S280 decking)
Beam centres - equal 1.38 m Profile span type Double
Beam or wall width 150 mm Propping None
Concrete span type End
Profile Data (ComFlor 46/1.2/S280 decking.)
Depth 46 mm Pitch of deck ribs 225 mm
Trough width 105 mm Crest width 67.0 mm
Nominal sheet thickness 1.20 mm Design sheet thickness 1.16 mm
Deck weight 0.13 kN/m² Yield strength 280 N/mm²
Concrete Slab (Normal Weight Concrete ; Grade C20/25; Mesh : A193)
Overall slab depth 120 mm
Concrete characteristic strength 20 N/mm² Concrete wet density 2400 kg/m³
Modular ratio 10 Concrete dry density 2350 kg/m³
Bar reinforcement :
Diameter 10 mm Yield strength 390 N/mm²
Distance from slab soffit 30 mm
Mesh reinforcement :
Mesh A193 Yield strength 390 N/mm²
Cover to Mesh 30 mm Mesh Layers Single
Account for End Anchorage No Shear connectors per rib N/A
Diameter of Shear Connectors N/A
Screed depth 10 mm Screed density 2000 kg/m³
Section Properties
*** Note - 1: All values of inertia are expressed in steel units
*** Note - 2: Average inertia is used for deflection calculations for the composite stage
*** Note - 3: Cracked dynamic inertia is used for natural frequency calculations
Deck Profile
Sagging Inertia, Iy 54.021 cm4/m Area of profile (Net), Ap 1534 mm²/m
Hogging Inertia, Iy 54.703 cm4/m Effective area of profile 1130.00 mm²/m
Composite
Inertia, Iy - Uncracked 1438 cm4/m Inertia, Iy - Cracked 883 cm4/m
Average inertia 1160 cm4/m Cracked inertia (dynamic) 987 cm4/m
Shear bond coefficients - Mr 41.66 Kr 0.073000
Concrete volume 0.101 m³/m/m
Loads Acting on Slab (Actions)
*** Note: Slab subjected to uniformly distributed loads (UDL) ONLY
Imposed (occupancy) 2.66 kN/m² Partitions 1.80 kN/m²
Ceilings and services 0.50 kN/m² Finishes 1.50 kN/m²
Self weight of concrete slab (wet) 2.37 kN/m² Self weight of decking 0.13 kN/m²
Self weight of concrete slab (dry) 2.32 kN/m² Self weight of screeds 0.20 kN/m²
Construction load 1.50 kN/m²
Line Loads Perpendicular to Deck Span (Actions)
None
Line Loads Parallel to Deck Span (Actions)
None
File Name: v9.0.34.24751
ComFlor 46/1.2/S280 Eurocodes Page 2 of 4
Fire Data
Design method Bar Method Fire resistance period 30 mins
Non-permanent imposed loads N/A
Partial Safety Factors
Actions Materials
Permanent, gamma G 1.35 Structural steel - elastic, gamma M0 1.00
Permanent - accidental, gamma GA N/A Structural steel - buckling, gamma M1 1.00
Variable, gamma Q 1.50 Concrete, gamma C 1.50
Combination factor - Fire, psi 1 0.70 Reinforcement, gamma S 1.15
Combination factor, psi 0 0.70 Combination factor, psi 2 0.60
Construction Stage
Deflection
Allowable deflection is the lesser of
1) Effective span / deflection limit without ponding 7.06 mm
2) Deflection limit without ponding, absolute maximum value 20.00 mm
3) Slab depth / 10 12.00 mm
Max self weight deflection = 0.32mm <= 7.06mm SATISFACTORY
Normal Stage
Span
The effective composite span is 1.32 m
Loadings @ SLS (kN/m²) @ ULS (kN/m²)
Dead (Profile, concrete, reinforcement) 2.51 3.39
Imposed 4.46 6.68
Superimp (Ceiling, services, screed, finishes) 2.20 2.96
Total 9.16 13.04
All line and point described above in 'Loading Details' are applied at the Normal stage
Shear Resistance Check
Shear Bond (BS EN 1994-1-1 Clause 9.7.3)
Shear span 0.33 m
Applied bond shear 6.65 kN/m
Bond resistance = (1000 * 90.00/1.25) * [41.66 * 1534.00/(1000 * [0.33 * 1000]) + 0.07] / 1000 + 0.00)/1000 = 21.16 kN/m
Unity Factor = 6.65/21.16 = 0.31 < 1 PASS
Vertical Shear (Proprietary Method)
Maximum applied shear 8.32 kN/m
Shear resistance of end diaphragm (ComFlor 225 only) 0.00 kN/m ***test value
Vertical shear resistance in the troughs is the greater of:
1. (0.44 * 457.97 * 90.00) / 1000
2. (0.12 * 2.00 * (100 * 0.01 * 20.00)^1/3) * 457.97 * 90.00) / 1000
= 25.40 kN/m
Vertical shear resistance above the ribs is the greater of:
1. (0.44 * 194.20 * 33.50) / 1000
2. (0.00 * 2.00 * (100 * 0.01 * 20.00)^1/3) * 194.20 * 33.50) / 1000
= 4.07 kN/m
Vertical shear resistance of the decking is:
(1000 / 105.00) * 2 *9767.21 * Cos(30.58) / 1000= 74.74 kN/m
Total vertical shear resistance is:= 104.21 kN/m
Unity Factor = 8.32/104.21 = 0.08 < 1 PASS
Punching Shear (BS EN 1994-1-1 Clause 9.7.6)
N/A - no concentrated loads have been applied
Bending Resistance Check (BS EN 1994-1-1 Clause 9.7.2)
Applied bending moment 2.75 kNm/m
Depth of concrete stress block 39.93 mm
Lever arm 77.24 mm
Compression in concrete 452.54 kN/m
Moment Resistance 34.95 kNm/m
Unity Factor = 2.75/34.95 = 0.08 < 1 PASS
Fire Resistance
Effective span in fire 1.23 m
Fire total UDL 7.83 kN/m²
Fire free moment 0.00 kNm/m
Moment resistance 0.00 kNm/m
Total moment resistance 1.00 kNm/m
Unity Factor 0.00 PASS
Deflection
Properties
Modular ratio 10.00
Uncracked section inertia 14376670.00 mm4
Cracked section inertia 8828574.00 mm4
File Name: v9.0.34.24751
ComFlor 46/1.2/S280 Eurocodes Page 4 of 4
Deflection Checks
Imposed load deflection 0.07 mm
Allowable deflection (20 mm max) 20.00 mm SATISFACTORY
Total deflection 0.11 mm
Allowable deflection 5.30 mm PASS
Dynamic Sensitivity
Dynamic inertia (cracked section) 987.42 cm4
Maximum deflection 0.10 mm
Frequency 57.28 Hz
Unity Factor = 5.00/57.28 = 0.09 < 1 PASS