Professional Documents
Culture Documents
Slab Calculation
Slab Calculation
NOTES:
1. Density of concrete assumed as 25 kN/Cum.
Definitions Of Terms: :
1. αf = Ratio of flexural stiffness of beam section to flexural stiffness of slab.
2. βt = Ratio of torsional stiffness of edge beam section to flexural stiffness of slab.
3. Φt = Strength reduction factor.
4. As = Area of Tension reinforcement required in sqmm.
5. As,min = Min area of flexural reinforcement in sqmm.
6. AstPrv = Area of longitudinal reinforcement provided at given section in sqmm.
Total area of longitudinal reinforcement calculated at a given section in
7. Ast =
sqmm.
8. b = Width of the Slab in mm.
9. B1 to B4 = Width of beams around slab in mm.
10. Cc = Effective Cover to tension reinforcement in mm.
11. CA and CB = cross-sectional constant to define torsional properties of slab and beam.
12. deff = Effective depth of slab in mm.
13. D1 to D4 = Depth of beams around slab.
14. Icr = Moment of Inertia of concrete crack section.
15. Ln = Length of clear span in direction that moment are being determined in mm.
16. L2 = Length of adjacent span of Ln in mm.
17. lb1 to lb2 = Moment of inertia of beams around slab in mm4.
18. Mcr = Cracking Moment.
19. Mu = Factored Bending Moment at a section in kNm.
20. Ptmin = Minimum percentage steel as per clause 10.
21. PtPrv = Provided percentage steel.
22. Vc = Nominal shear strength provided by concrete in kN.
23. Vu = Factored Shear Force at a section in kN.
24. Vud = Design Shear Force in kN.
25. y = Neutral axis depth.
Code References :
ACI 318M - 2014
Slab No. : S2
Level = 3.85m
Design Code = ACI 318M - 2014
Grade Of Concrete = C20
Grade Of Steel = Fy420
Clear Cover = 20.000 mm
Long Span, Ly = 2.700 m
Short Span, Lx = 1.930 m
Imposed Load = 1.000 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 7.240 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL
Design Moments:
Short Span Positive Moment At Midspan -
M1 = 0.220 kNm
Area Of Reinforcement Required (BM) = 7.777 sqmm/m
Reinforcement Provided = #10 @ 150 C/C
= 524.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 0.270 kNm
Area Of Reinforcement Required (BM) = 9.554 sqmm/m
Reinforcement Provided = #10 @ 150 C/C
= 524.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 0.330 kNm
Area Of Reinforcement Required (BM) = 13.458 sqmm/m
Reinforcement Provided = #10 @ 150 C/C
= 524.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 0.405 kNm
Area Of Reinforcement Required (BM) = 16.537 sqmm/m
Reinforcement Provided = #10 @ 150 C/C
= 524.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement Required = 135.000 sqmm/m
Reinforcement Provided = #10 @ 150 C/C
= 524.000 sqmm/m
Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 3.493 kN
Nominal Shear, Vc = 57.020 kN
> 3.493 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 - (Lx / (2 x = 4.490 kN
Ly))))
Nominal Shear, Vc = 49.417 kN
> 4.490 Slab Is Safe In Shear