Professional Documents
Culture Documents
90
90
Indice Data Modificare Proiectant Aprobat Consultant Aprobat CFR
Washer Washer
Scara / Scale 1:5 Index Date Modification/Revision Designer Approved Consultant Approved CFR
4.50 6.00
Shackle 5/8"
"B" detail Cablu portant superior D16 Metallic net 6/135mm
2 Upper bearing rope D16 Cablu portant superior D16 Wire rope clamps Bolt with split pin
Upper bearing rope D16
Nut
1 Washer
Base plate
7 Wire net 50x50x2.5mm Semn tur
Data
6 CONSULTANT / CONSULTANT Date Signature
9
DETALIUL "C" / "C" DETAIL Post - HEA 140, h=3.0m
Nut Aprobat
R. Liuzza dec. 2011
Approved Project manager
Scara / Scale 1:20
12 4 Aprobat
C. Gambelli dec. 2011
10 11
2.00
2.00
2.00
2.00
Approved Section 1 Coordinator
5 Washer
Detaliul "A" Detaliul "C" Inel de prindere 3/4" Bolt D20 with split pin Verificat Expert Cheie
A. Troiano dec. 2011
Class 25/30 concrete foundation Checked Key Expert
40 Shackle 3/4"
"A" detail "C" detail
Anchor Inel de prindere 3/4" Element fr n Coupler
13 Shackle 3/4" Brake element SUBCONTRACTANT / SUBCONTRACTOR
Base plate Plac de ba
5.00 5.00 Ancor Aprobat Responsabil Subconsultant
5.00 Micropilot (Ancor lateral /Ancor ) Base plate Approved Subconsultant Responsible A. Stanciu - Dinulescu
5.00 50.00 Micro pile
Anchor Proiectant
Elaborated Designer D. Zinculescu
(Lateral anchor/ Internal anchor)
90
Inel de prindere 3/4"
Class 25/30 concrete foundation Reabilitarea liniei de cale ferata a coridorului
variabil / variable
Washer Shackle 3/4" Cablu portant inferior Proiect/Project
IV Pan European, pentru circula ia trenurilor cu viteza maxim de 160 km/h,
Lower bearing rope
LEGEND
Tronsonul : Bra 2004/RO/16/P/PA/003
20
Inel de prindere 3/4" Faza / Phase:
1. St - HEA 140 1. Post - HEA 140 NOT : Cablu portant inferior ,
Shackle 3/4" Section : Bra D.E. / E.D.
2 2. Base plate 1. Lower bearing rope
Post 45
de pe direc ia versantului 3. Uphill-sided anchor sa preia o energie de impact de 250KJ.
4. Lateral anchor 2. Dimensiunile ancorelor proiectate se vor definitiva dup Denumire desen / Drawing Title :
Inel de prindere 5/8"
5. Cablu portant superior 5. Upper bearing rope realizarea investiga
6. Cablu portant inferior 6. Lower bearing rope lucr . Shackle 5/8"
Retaining rope DETALII ELEMENT DE PROTEC
7. Cablu stabilizator lateral 7. Side stabilisation rope 90
8. Retaining rope NOTE:
ROCKFALL PROTECTION ELEMENT DETAILS, H=3.0M
Upper plate Cablu stabilizare lateral D12
9. Brake element 1. The rockfall protection element should absorb an impact Side stabilisation rope D12 Class 25/30 concrete foundation
10. Plas metalic 10. Metallic net 6/135mm energy of 250KJ. Scara / Scale Nr. / No
11. Wire net 50x50x2.5mm 2. The dimensions of the designed anchors will be finalized Codificare / Codification System LOT / LOT
1:100, 1:50, 1:20, 1:10, 1:5 01 / 01
12. Cablu conectare 12. Conection rope after receiving the required geotechnical investigations.
13. Internal anchor Cablu portant superior E A 5 1 0 1 E 0 0 Q A C T 0 0 0 X 0 2 2 1
Upper bearing rope