You are on page 1of 1

Doc.No.

NSD-DPSAC-SS-AC-(PG 300-100)-2014-02-1295
SPECIFICATION SHEET

Diesel Powered Oil Flooded Screw Air


Product Type : Single Stage-TROLLEY-2W Date(Org) :17/12/2015
Compressor

Document Marketing Revision : R03 Date(Rev) :24/04/2018


Category :
S.No Description Units Data
A Model - PG 300-100
B TPL Number - Z03149
1 Duty cycle - Intermittent Duty
cfm
2 Free Air Delivery ( Max ) 300(8.50)
(m3/min)
+0.0(+0.0)
bar
3 Maximum Working Pressure (g) 6.90(7.0)
(kgf/cm²) -0.5(-0.5)

+0.0(+0.0)
bar
4 Idling Pressure (g) 7.90(8.1)
(kgf/cm²) -0.5(-0.5)

5 Engine Make - CUMMINS


6 Engine Model - 4BT 3.9
7 Engine power output - Nett HP 102
+30
8 Rated operating Speed rpm 2200
-30

+50
9 Idling speed rpm 1250
-0

10 Fuel consumption at Rated condition Ltr/hr 18


11 Engine lube oil capacity Litres 9
12 Engine coolant capacity Litres 20
13 Battery capacity and quantity AH & Nos 12 x 2 / 120 /2 /(Recommanded,Not in ELGI scope)
14 Flywheel housing - SAE 3
15 Flywheel - SAE 11.5
16 Fan type and Diameter mm ( inch) PUSHER,660(26.00)
17 Maximum - ambient and altitude °C & m 5 to 50 and 2473
18 Type of Mounting - TROLLEY-2W
19 Tyre size and Ply rating Inches 6x16, 8 PLY
20 Recommended maximum Trolley Speed km/hr 30 max
21 Oil recommended - ELGI AIR LUBE / AIR LUBE PLUS / AIR LUBE XD
22 Capacity of separator tank ( Full volume) Litres 55
23 Oil fill capacity Litres 17
24 Initial Oil fill /Refill Litres 11/6
25 Fuel tank capacity Litres 100
DOT(Ambient<30) °C Amb + 36 (min.) to Amb + 60 (max.)
Discharge oil
26 DOT(Ambient 30 to 40) °C Amb + 36 (min.) to Amb + 60 (max.)
temperature
DOT(Ambient>40) °C Amb + 36 (min.) to Amb + 60 (max.)
27 Noise level @ 7m distance dB(A) NA
Inches & 1 1/2"-1NO,3/4"-4 NOS
28 Air outlet port size & Qty Nos
Skid / Without under 2315 x 1200 x 1600 (+/-50)
Overall dimensions (L x mm
29 carriage
B x H)
With under carriage mm 3275 x 1680 x 2055 (+/-50)
30 Nett Weight (Dry condition) kg 1500(Approx)
31 Reference standard for FAD and SFC - ISO 1217:2009 Annex 'D'
32 Reference standard for Noise level - ISO 2151, Second Edition
Note:-Package dimensions includes Silencer and Service line outlet ball valves

Prepared By ANAND KUMAR C.V Approved By LAKSHMANAN N


All data and information in this sheet are confidential and property of ELGI EQUIPMENTS LIMITED
This is system generated document and hence signature is not required
Page 1 of 1

You might also like