Professional Documents
Culture Documents
uid=G1715583&layout=portrait
PUBLISHED: 19-JUL-2018
2011.0 DISCOVERY 4 / LR4 (L A), 303-00
C Y L I N D E R H E A D D I STO RT I O N (G1676086)
https://topix.jaguar.jlrext.com/topix/service/procedure/146740/ODYSSEY/G1676086/en_US/pdf?uid=G1715583&layout=portrait 1/3
4/28/23, 1:37 PM https://topix.jaguar.jlrext.com/topix/service/procedure/146740/ODYSSEY/G1676086/en_US/pdf?uid=G1715583&layout=portrait
GENERAL PROCEDURES
CHECK
1.
Using a suitable metallic straight edge and feeler gauge, measure the cylinder head face in the
areas illustrated. Note the maximum value.
https://topix.jaguar.jlrext.com/topix/service/procedure/146740/ODYSSEY/G1676086/en_US/pdf?uid=G1715583&layout=portrait 2/3
4/28/23, 1:37 PM https://topix.jaguar.jlrext.com/topix/service/procedure/146740/ODYSSEY/G1676086/en_US/pdf?uid=G1715583&layout=portrait
2.
CAUTION:
Machine the minimum thickness of material from the cylinder head to meet specification.
If a selection of cylinder head gaskets are available, increase the thickness of the cylinder
head gasket by one size.
NOTES:
Prior to having the cylinder head machined, prior approval is required by Jaguar or
Land Rover engineering.
If the cylinder head requires machining, this must be carried out by a local engineering
company.
If the cylinder head exceeds the maximum value, the cylinder head must be machined.
Refer to: Specifications (303-01A, Specifications).
Refer to: Specifications (303-01B, Specifications).
Refer to: Specifications (303-01C, Specifications).
Refer to: Specifications (303-01D, Specifications).
aGNrNDg0ODsyMDIzLTA0LTI4VDEwOjM3OjMzLjU2NFo7NzguMTkwLjExNi4xNTY7QkE1ODI5Njc=
https://topix.jaguar.jlrext.com/topix/service/procedure/146740/ODYSSEY/G1676086/en_US/pdf?uid=G1715583&layout=portrait 3/3