Professional Documents
Culture Documents
I LLUSTRATED
P ARTS C ATALOGUE
R EV . 1 – N OV . 2008
COSTRUZIONI AERONAUTICHE
TECNAM s.r.l.
COSTRUZIONI AERONAUTICHE
P92-J
TECNAM s.r.l. PARTS CATALOG INTRODUCTION pag. I
INTRODUCTION
This illustrated Parts Catalog describes the spare parts concerning the P92 J
aircraft ,manufactured by TECNAM S.r.l. di Casoria (NA) ITALY.
- SECTION 1 - WING
- SECTION 2 - FUSELAGE
- SECTION 3 - TAIL SURFACES
- SECTION 4 - LANDING GEAR
- SECTION 5 - FLIGHT CONTROLS
- SECTION 6 - POWER PLANT
- SECTION 7 - SYSTEMS
- SECTION 8 - FURNISHING
a) “FIGURE & INDEX NO.” column. It includes the figure number and the index
numbers of the spare parts illustrated in the figure.
b) "PART NUMBER (P/N)" column. It includes the number assigned to the spare
parts by the manufacturer, which have to be reported in the provisioning
inquiries.
c) "NOMENCLATURE" column. It includes a brief description of the parts.
d) "QUANTITY FOR ASSY" column. It includes the number showing the quantity
of each item illustrated on the figure to which the enumeration refers.
e) "EFFECTIVITY CODE" column. It includes the codes assigned to the
production series having a different configuration or different P/N.
When no indication appears, it is recognized that the part can be used for any
N.C. and that it maintains its inherent function regardless of any possible
modification introduced during the manufacturing process.
3) Attachment parts, i.e. bolts, nuts, screws, etc., or parts that are available on the
market are generally not supplied by Tecnam.
The catalog conveniently reports some of these parts identifying them by their
commercial code.
1) Refer to fig. 1 at page VII and determine the section in which the part is used.
INDEX
SECTION 1 - WING
1.1 Wing structure assembly 1-1
1.2 Wing box assembly 1-5
1.3 Leading edge and strut 1-7
1.4 Flap assembly 1-10
1.5 Aileron assembly 1-12
SECTION 2 - FUSELAGE
2.1 Aft fuselage assembly 2-1
2.2 Cabin structure 2-3
2.3 Fuselage skin installation 2-5
2.4 Cabin skin installation 2-8
2.5 Doors installation 2-11
2.6 Windows installation 2-14
SECTION 7 - SYSTEMS
7.1 Fuel system 7-1
7.2 Brake system 7-4
7.3 Pitot and static press. system 7-6
7.4 Vacuum system 7-8
7.5 Throttle system control 7-10
7.6 Electric components 7-12
SECTION 7 - SYSTEM
7.7 Instruments panel installation 7-15
7.8 Heating system installation 7-18
7.9 Oil cooler system installation 7-20
7.10 Water cooler system installation 7-22
SECTION 8 - FURNISHING
8.1 Cabin interior finishing 8-1
1
3
SECTION 1 - WING
SECTION 2 - FUSELAGE
SECTION 3 - TAIL SURFACES
SECTION 4 - LANDING GEAR
SECTION 5 - FLIGHT CONTROLS
SECTION 6 - POWER PLANT
SECTION 7 - SYSTEMS
SECTION 8 - FURNISHING
FLAP ASSEMBLY
92-1-006-001 Flap assembly, left 1
92-1-006-002 Flap assembly, right 1
1 92-1-600-001 Rib with hinge, left 1
92-1-600-002 Rib with hinge, right 1
2 92-1-401-1 Rib, extremity left 1
92-1-401-2 Rib, extremity right 1
3 92-1-402-1 Rib 12
4 92-1-403-1 Nose - rib 4
5 92-1-404-1 Spar 2
6 92-1-601-1 Hinge 2
7 92-1-406-1 Skin 8
8 92-1-407-1 Hinge, MS20001-4 4
9 92-1-407-2 Spacer 4
10 92-1-408-1 Skin, leading edge 2
11 92-1-408-2 Skin, trailing edge 2
12 92-1-410-5 Angle, reinforcement hinge side, left 1
92-1-410-6 Angle, reinforcement hinge side, right 1
13 92-1-410-3 Angle, reinforcement, left 1
92-1-410-4 Angle, reinforcement, right 1
AILERON ASSEMBLY
92-1-004-001 Aileron assembly, left 1
92-1-004-002 Aileron assembly, right 1
1 92-1-400-001 Rib with hinge, left 1
92-1-400-002 Rib with hinge, right 1
2 92-1-401-1 Rib, extremity left 1
92-1-401-2 Rib, extremity right 1
3 92-1-402-1 Rib 12
4 92-1-403-1 Nose - rib 4
5 92-1-404-1 Spar 2
6 92-1-405-1 Hinge 2
7 92-1-406-1 Skin 8
8 92-1-407-1 Hinge, MS20001-4 4
9 92-1-407-2 Spacer 4
10 92-1-408-1 Skin, leading edge 2
11 92-1-408-2 Skin, trailing edge 2
12 92-1-410-1 Angle, reinforcement hinge side, left 1
92-1-410-2 Angle, reinforcement hinge side, right 1
13 92-1-410-3 Angle, reinforcement, left 1
92-1-410-4 Angle, reinforcement, right 1
14 92-1-409-1 Strip, left 1
92-1-409-3 Strip, right 1
15 92-1-409-2 Sheet - adjustable trim 1
CABIN STRUCTURE
1 92-2-008-000 Cabin structure assembly 1
2 92-11-942- Firewall assembly 1
000
3 92-11-941-1 Plate - reinforcement 1
4 92-11-942-2 Angle, right 1
5 92-11-942-3 Angle, left 1
pag. 2-6
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
pag. 2-7
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
pag. 2-9
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
pag. 2-10
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
pag. 2-12
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
DOORS INSTALLATION
92-2-002-001 Door assembly, left 1
92-2-002-002 Door assembly, right 1
1 92-2-200-1 Door - structure, left 1
92-2-200-2 Door - structure, right 1
2 92-2-201-1 Hinge - half, door element 2
3 92-2-201-2 Hinge - half, cabin element 2
4 92-2-113-3 Spacer for hinge 2
5 92-2-201-3 Pin 2
6 92-2-301-1 Skin - outer, left 1
92-2-301-2 Skin - outer, right 1
7 92-2-301-7 Window in Lexan, left 1
92-2-301-8 Window in Lexan, right 1
8 92-2-203-1 Air intake - cabin ventilation 2
9 92-2-301-3 Molding - upper, left 1
92-2-301-4 Molding - upper, right 1
10 92-2-301-5 Molding - lower, left 1
92-2-301-6 Molding - lower, right 1
11 92-2-301-8 Upholstery panel with pocket, left 1
92-2-301-9 Upholstery panel with pocket, right 1
12 92-9-910-1 Safety lock in Teflon 2
13 92-2-304-1 Plate for safety lock 2
14 92-2-303-1 Retainer - window, left 1
92-2-303-2 Retainer - window, right 1
15 92-2-303-3 Retainer - window 2
16 92-2-303-4 Retainer - window 2
pag. 2-13
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
DOORS INSTALLATION
17 92-2-303-5 Retainer - window 2
18 92-2-303-6 Rib - door molding, left 1
92-2-303-7 Rib - door molding, right 1
19 92-2-302-3 Handle - door 2
20 92-2-304-1 Plate 2
21 92-9-905-1 Pin 2
22 92-9-911-1 Spring 2
23 92-9-905-4 Case for pin 2
24 92-9-912-1 Tie rod - control lock 2
25 92-2-302-8 Handle -, with lock 1
92-2-302-3 Handle - outside 2
26 92-2-302-8 Cable - door lock control 2
27 92-2-302-4 Lever 2
28 92-2-302-7 Knob 2
29 92-2-302-001 Bracket - handle, left 1
92-2-302-002 Bracket - handle, right 1
30 92-3-302-6 Bushing 2
31 Lock assembly 1
32 92-2-305-1 Bracket - door end travel, left 1
92-2-305-2 Bracket - door end travel, left 1
33 92-2-305-3 Cable - door stop 2
pag. 2-15
Fig. Q.ty EFF.
NO. P/N NOMENCLATURE assy CODE
WINDOWS INSTALLATION
1 92-2-102-5 Window - lateral 2
2 92-2-108-2 Window - rear 1
3 92-2-108-3 Windshield in Perspex 1
4 92-2-111-1 Fairing 1
5 92-2-126-1 Retainer - window, rear 1
6 92-2-121-1 Retainer - window, left 1
7 92-2-121-2 Retain - window, right 1
8 92-12-101-4 Strip - windshield 1
STABILATOR ASSEMBLY
92-7-001-001 Stabilator assembly - half, left 1
92-7-001-002 Stabilator assembly - half, right 1
1 92-7-101-1 Rib - root side 2
2 92-7-102-1 Rib 6
3 92-7-103-1 Tip - stabilator 2
4 92-7-104-1 Spar 2
5 92-7-105-1 Skin - leading edge 2
6 92-7-105-2 Skin - trailing edge 2
7 92-7-106-1 Torque tube 2
8 92-7-107-1 Nose 2
9 92-7-108-2 Panel - upper 2
10 92-7-108-1 Panel - lower 2
11 92-7-109-1 Hinge - half, trim/tab 4
12 92-7-110-1 Collar - torque tube 2
13 92-7-111-1 Plate - coupling 2
14 92-7-002-001 Tab assembly, left 1
92-7-002-002 Tab assembly, right 1
15 92-7-003-000 Torque Tube assembly 1
16 92-7-303-1 Spacer 2
17 92-7-112-1 Strip for rib 12
18 92-7-202-3 Pin 4
19 92-5-905-1 Spacer trim 1
20 92-5-907-1 End travel 1
21 92-5-907-2 End travel 1
22 UNI 5737 Bolt M6 cr8.8 L=70 mm 2
STABILATOR ASSEMBLY
23 UNI 6592 Washer d=6 2
24 UNI 7473 Self locking nut M6 2
FIN ASSEMBLY
92-6-500-000 Fin assembly 1
1 92-6-511-1 Rib - upper 1
2 92-6-512-1 Flange - rudder bracket 1
3 92-6-800-2 Bushing 1
4 92-6-520-1 Spar, front 1
5 92-6-520-2 Spar, rear 1
6 92-6-580-1 Rib, lower 1
7 92-6-580-2 Rib, center 1
8 92-6-580-3 Rib, upper 1
9 92-6-540-1 Plate - fin fuselage attachment 1
10 92-6-550-1 Stiffener - rear spar 2
11 92-6-550-2 Stiffener - front spar 2
12 92-6-560-1 Skin - leading edge 1
13 92-6-570-1 Skin - lateral fin 2
14 92-6-530-4 Stringer - skin reinforcement 6
15 92-6-700-1 Tip - fin 1
16 92-6-530-1 Angle - rib reinforcement 1
17 92-6-530-2 Angle - rib reinforcement 1
18 92-6-530-3 Angle - fitting reinforcement 1
19 92-6-590-1 Angle - rib reinforcement 1
20 UNI 5739 Bolt M5 cr8.8 L=20 mm 9
21 UNI 6592 Washer d=5 9
22 UNI 7473 Self locking nut M5 9
RUDDER ASSEMBLY
92-6-600-000 Rudder assembly 1
1 92-6-610-1 Torque tube 1
2 92-6-620-1 End tube 2
3 92-6-630-1 Rib 3
4 92-6-650-1 Rib - upper 1
5 92-6-640-1 Skin, left 1
6 92-6-640-2 Skin, right 1
7 92-6-801-1 Bellcrank - rudder control 1
8 92-6-800-2 Bushing 1
9 92-6-800-1 Bracket 1
10 92-6-651-1 Sheet - adjustable trim 1
11 UNI 5737 Bolt M6 cr8.8 L=30 mm 2
12 UNI 6592 Washer d=6 2
13 UNI 7473 Self locking nut M6 2
STICK INSTALLATION
1 92-4-002-000 Aileron/stabil. control assembly 1
2 92-4-200-000 Stick attachment assembly 2
3 92-4-210-000 Shaft 1
4 92-4-203-2 Pulley 2
5 92-4-203-3 Spacer 2
6 92-4-203-4 Bushing 4
7 92-4-300-000 Stick 2
8 Grip with push-button 2
9 UNI 5737 Bolt M6 cr8.8 L=50 mm 2
10 UNI 6592 Washer d=6 2
11 UNI 7473 Self locking nut M6 2
12 UNI 5593 Castle nut M6 2
13 UNI 1336 Cotter pin 2
14 UNI 5737 Bolt M6 cr8.8 L=25 mm 2
15 UNI 5737 Bolt M6 cr8.8 L=40 mm 2
FUEL SYSTEM
1 92-9-980-1 Flange 2
2 92-9-980-3 Finger strainer 2
3 5/8 19fil. Nut 2
4 92-9-980-4 Hose 2
5 Union 2
6 O-Ring 2
7 Shut-off valve 1/8” 2
8 AN816-4D Nipple 2
9 AN819-4D Sleeve 2
10 AN818-4D Nut
11 92-9-981-1 Line - valve to filter, left 1
12 92-9-981-2 Line- valve to filter, right 1
13 AN824-4D Tee 1
14 Nut M16 1
15 Hose - fuel drain 1
16 92-9-402-1 Bracket 1
17 10560 Gascolator 1
18 Adapter -tube to filter 1
19 92-11-103-1 Fire shield for filter 1
20 92-9-404-1 Fuel drain cup, left 1
92-9-404-2 Fuel drain cup, right 1
21 92-9-405-000 Fuel drain cup 1
22 92-9-401-000 Bracket valve 1
23 92-9-400-000 Bypass valve assembly 1
24 92-9-409-000 Tee with nut 2
FUEL SYSTEM
25 92-11-950-1 Tee 1
26 92-11-951-1 Hose - line: tee to carb., left 1
27 92-11-951-2 Hose - line: tee to carb., right 1
28 92-11-951-3 Hose - line: valve to filter 1
29 92-11-951-4 Hose - line: valve to pump 2
30 92-11-951-5 Hose - line: tank to valve 2
31 Clamp - Serflex 12
32 Hose - fuel drain 2
33 Hose - filter drain 1
34 92-9-411-1 Union 1
BRAKE SYSTEM
1 92-9-100-000 Lever 1
2 Knob lever 1
3 92-9-110-3 Bushing 2
4 92-9-111-1 Push-rod 1
5 Brake cylinder 1
6 AN818-4D Nut 8
7 AN819-4D Sleeve 7
8 AN822-4D Elbow 3
9 AN816-4D Nipple 2
10 AN824-4D Tee 1
11 92-9-904-1 Flange 1
12 92-9-904-2 Washer 1
13 92-9-904-3 Brake fluid reservoir 1
14 92-9-926-1 Clamp 2
15 Valve 1/8" - parking brake 1
16 92-9-923-1 Tube - line: cylinder to valve 1
17 92-9-923-2 Tube - line: valve to tee 1
18 92-9-923-3 Tube - line: tee to brake assy, left 1
19 92-9-923-4 Tube - line: tee to brake assy, left 1
20 92-9-918-1 Bracket 4
21 92-5-310-7 Bolt - lever attachment 2
22 UNI 6592 Washer d=8 2
23 UNI 5737 Bolt M6 cr8.8 L=25 mm 1
24 UNI 5593 Castle nut M6 1
25 UNI 1336 Cotter pin 1
VACUUM SYSTEM
1 Hose - Vacuum pump to valve 1
2 Relief valve 1
3 Nut 1
4 Hose 1
5 92-8-408-1 Union end “Y” for valve (P/N 2H3-6) 1
92-8-408-2 Union end “Y” for valve SIGMA-TEK 1
6 Hose - valve to horizontal gyro 1
7 Hose - horizontal to suction gage 1
8 Hose - valve to directional gyro 1
9 Hose - horizontal to air filter 1
10 Hose - directional to air filter 1
11 1J7-1 Air filter 1
12 Clamp - Serflex 12
ELECTRIC COMPONENTS
1 945 345 Voltage regulator 1
2 Holder - fuse 1
3 40A 12V 2NA Relay overvoltage 1
4 OS75-14 Overvoltage sensor 1
5 992 819 Relay starter 1
6 92-9-410-1 Bracket 1
7 105-408 Condenser electrolytic (22000μF 25V) 1
8 073-0141 Strobe Light 2
9 152-0007 Power supply - anticollision light 1
10 W1285-PR Position light - tail 1
11 W1285-PR Position light - green, right wing 1
Position light - red, left wing 1
12 FIAMM 6H4P Battery 1
13 111-226-5 Relay - battery 1
14 GE 4509 Landing light 1
15 OAT gauge 1
16 164R Avvisatore acustico di stallo 1
17 164r Stall detector 1
18 Speaker - radio 2
19 Antenna VHF 1
20 Antenna VOR 1
21 Antenna G.P.S. (Opt.) 1
22 Antenna Transponder 1
23 92-9-501-1 Bus bar - breakers 1
24 UNI 5737 Bolt M6 cr8.8 L=20 mm 2
ELECTRIC COMPONENTS
25 UNI 6592 Washer d=6 6
26 UNI 7473 Self locking nut M6 6
27 UNI 5737 Bolt M6 cr8.8 L=16 mm 4
28 UNI 5737 Bolt M4 cr8.8 L=16 mm 3
29 UNI 6592 Washer d=4 3
30 UNI 7473 Self locking nut M4 3
4
6 11
7
14
4
9
8
2 13
1
12
5
10
16
15