Professional Documents
Culture Documents
Class O Armaflex
The flexible insulation system engineered to prevent
condensation and energy losses
}
Closed cell structure provides built-in vapour barrier
}
Ease of installation & Seamless joints ensure long term efficiency
}
Class 0 Fire Performance
Thermal conductivity λ0 °C ≤ 0.035 W/(m · K)
}
Water vapour resistance μ ≥ 7,000
}
Technical Data - Class O Armaflex®
Assembly Light weight and flexible. Closed cell structure means no additional vapour barrier is required.
Chemical behaviour Excellent resistance to ozone, oil and chemicals (consult product test list).
UV resistance For UV Protection, Armacell recommended coverings are required Can be stored in
dry, clean rooms
Storage & Shelf life Self-adhesive tapes, self-adhesive sheets: 1 year
and ambient
temperature (0 °C –
35 °C).
1. For temperatures below -50°C please contact our Technical Services to request for the corresponding technical information.
2. The building materials classification is valid on metal or solid, mineral surfaces.
All data and technical information are based on results achieved under typical application conditions. Recipients of this information should, in their own interest and responsibility, clarify with us in due time whether or not the data and information
apply to the intended application area. Please consult our Customer Service Center before insulating stainless steels. Armaflex 520 adhesive must be used to guarantee proper installation for all piping & equipment. For Duct application
Armaflex DuctSeal adhesive shall be used. For some refrigerants the discharge temperature may exceed +110 °C, please consult our Technical Services for further information. For outside use, Armaflex should be protected with Arma-Chek
covering immediately after 36 hours of complete curing of the adhesive.