Professional Documents
Culture Documents
01 17.12.2018 IMS-EG-006-VER 01
02 16.05.2022 IMS-EG-006-VER 02
Table of Contents
The purpose of this Engineering Guidelines (EG) is to provide guideline to install Fall Arrest
System/Working Platform in Plumbing shafts.
2.0 Scope
This EG shall be applicable for Plumbing Shafts in all buildings and facilities under DLF -RENTCO.
3.1 Definition
Nil
3.2 Abbreviations
Nil
5.0 Record
The EG shall be reviewed and revised by the rules & Procedure Sub-committee as necessary
and at a minimum, not later than 3 years from the date of the last revision based on the feedback
from various sources.
In plumbing shaft, the fall arrest system/working platform shall be provided at alternate level
with following specification.
2. Frame of t-angle 40x40x6 & rectangle pipe 50x25 mm of 14-gauge medium duty with spacing of
50 mm
3. With 01 coat of Zink rich primer & 02 coat of black epoxy paint.