z Single or multistage z Cast iron (I1) z Oil refining z Differentialhead as required z Steel casing - cast iron impellers z Petrochemical industry z Side discharge through pump head (S1) z Chemical industry z Thrust bearings oil or grease lubri- z Steel and chromium steel (S6) z Power stations cated z 18/10/2.5 austenitic stainless steel z General industry z Column shaft with product-lubricat- * (A8) ed bearings z Other materials available upon zPerformances: z Concentric discharge avoiding radi- request. al loads on bearings * The values shown are the percentages in z Capacity : up to 250 m3/h or 1,100 z Excellent efficiency Cr/Ni/Mo USGPM z Shaft sealing by packing or stan- z Total head : up to 250 m or 820 ft dard single, double or tandem zOptional constructions: z Maximum operating pressure up to mechanical seal 25 bar or 362 PSI z Foundation ring available z Can pump for very low NPSHa z Temperature operating range : from z Inducer available z Design for high temperature molten -40 to 120°C or -40 to 250°F. z API 610 design (VS 1 or VS6) salts Special design cryogenic or very available z Design with steam jacket high temperature z Maximum speed : 3,000 rpm at 50 Hz