Considering the nature of subsoil and type of foundation to be constructed at the site deep foundation in the form of pile
Cut off level = 2.00
Effective length of the pile shaft = 21.00
The ultimate bearing capacity (Qu) of piles is given by the following formula: D Qu = Ap(0.5DgNg + PDNq) +SK PDitandAsi i =1 Where Ap = Cross sectional area of pile toe in cm2 D = stem diameter in cm g = effective unit weight of soil at pile toe in kg/cm3 Pd = Effective overburden pressure at pile toe kg/cm3 Nq, Ng = bearing capacity factors K = coefficient of earth pressure d = angle of wall friction between pile and soil Asi = Surface area of pile stem in cm2
Sub-soil Properties
Effective depth Cohesion Angle of internal Nq
(m) t/m2 friction Stratum -I 14.35 7.30 3
Stratum -II 0.00 0.00 0
Stratum -III 0.00 0.00 0
Last Stratum 6.65 0.00 31 24.5
Tatal = 21.00 Dia of the pile = 1.2 m 1 Cross sectional area of pile 1.1310 m 2 0.5 Pile capacity
Clay ApNcCp aCAs
For Sand Ap(0.5DgNg + PDNq) K PDitandAsi Total End Stratum -I Stratum -III Last Stratum
Sand layer 514.280 17.779 0.000 234.253 766.313
For Clay layer 0.000 197.459 0.000 0.000 197.458523 Total 963.771 Factor of safety = 2.5 Safe axial load carrying capacity of pile = 385.509 Lataral capacity of pile should be checked against as per Cl. No.- 5.5.2, IS:2911 (Part -1/Sec-2)-1979