This document outlines specifications for electronic revenue meters used by Saudi Electricity Company. It includes details on meter configuration features and default settings, such as recording 14 channels of load profile data by default and displaying units according to a specified table. It also describes marking requirements for meters, mandating a nameplate with information printed in both Arabic and English, including the manufacturer name, meter type, voltage/current ratings, and other identifying details.
This document outlines specifications for electronic revenue meters used by Saudi Electricity Company. It includes details on meter configuration features and default settings, such as recording 14 channels of load profile data by default and displaying units according to a specified table. It also describes marking requirements for meters, mandating a nameplate with information printed in both Arabic and English, including the manufacturer name, meter type, voltage/current ratings, and other identifying details.
This document outlines specifications for electronic revenue meters used by Saudi Electricity Company. It includes details on meter configuration features and default settings, such as recording 14 channels of load profile data by default and displaying units according to a specified table. It also describes marking requirements for meters, mandating a nameplate with information printed in both Arabic and English, including the manufacturer name, meter type, voltage/current ratings, and other identifying details.
SPECIFICATION FOR ELECTRONIC REVENUE Issue Date: 04/2023 Page: 49 of 93 CT AND CT-VT METER 40-SDMS-02A Rev. 9.5
Configuration features Default settings
Current date/ time, status information, Import Active Power (+), Import Reactive Power (+), Import Apparent Power (+), Import Reactive LP recording Power (QI), Export Reactive Power (QIV), (at least fourteen (14) channels) Export Active Power (-), Export Reactive Power (-), Export Apparent Power (-), import average power factor and export average power factor. CT Ratio 1 VT Ratio 1 The number of digits for the display Active energy (kWh) Reactive energy (kVarh) As per Table No.8 – Default Units to Display Apparent energy (kVAh) Maximum demand power (W) Instantaneous values (V, A, W, Var, VA, Hz)
11. MARKING OF METERS
11.1. Every meter shall be provided with a suitable size of name-plate inside the meter cover if used. Information shall be bilingual (Arabic and English). These shall be printed clearly, indelibly and readable from outside 11.2. Name-plate shall include the following information: 11.2.1. The Manufacturer's name or trademark and place of manufacturing 11.2.2. Designation and type 11.2.3. The number of phases and the number of wires for which the meter is designed 11.2.4. Meter ID (Refer to Clause 6.12.3 of the CT and CTVT OBIS Codes Specifications) 11.2.5. Year of manufacture 11.2.6. The reference voltage in the form of the nominal voltage of the system or the secondary voltage of the instrument transformer to which the meter is to be connected. 11.2.7. The rated current and the rated maximum current; for example: 1.5(6) Amps 11.2.8. The reference frequency in Hertz, for example: 60 Hz 11.2.9. The meter constants in the form Imp/kWh, Imp/kVarh, Imp/kVAh