Professional Documents
Culture Documents
1
Specimen Cutters
Compact and flexible
Wingo’s specimen cutters enable stable cutting of materials without waste. Even difficult-to-process materials
can be cut with precision.
The double-column clamping vice enables secure clamping of irregularly shaped materials and easy vertical cutting.
Cooling water/cutting fluid circulated by a pump is sprayed from a whetstone cover to prevent degradation and
clogging by whetstone particles due to heat effects during cutting and enable reduction of post-finishing processes.
A transparent safety cover enables safe work by preventing scattering of whetstone particles and cutting chips.
Moving and rotating parts are sinter-polished for excellent durability.
■Consumables
・Cutting whetstones
※The safety cover is transparent. ・Cutting oils (Wellcut) 1-liter, 2-liter, 18-liter
205
High-speed steel, special steel, and chromium
HA
molybdenum steel 230
2
Medium Cutters Models L-6000/6100, L-7000/7100, L-8000/8100, and L-9000/9100
L-7100
※The safety cover is transparent.
■Product Specifications
Model L-6000/6100 L-7000/7100 L-8000/8100 L-9000/9100
Max. Cutting Ability 55mmΦ 60mmΦ 70mmΦ 80mmΦ
3
L-6000A/6100A, L-7000A/7100A, L-8000A/8100A, and L-9000A/9100A
L-8100A
※The safety cover is transparent.
■Product Specifications
Model L-6000A/6100A L-7000A/7100A L-8000A/8100A L-9000A/9100A
Max. Cutting
55mmΦ 60mmΦ 70mmΦ 80mmΦ
Ability
3-phase 200/220V 3-phase 200/220V 3-phase 200/220V 3-phase 200/220V
Power Supply
50/60Hz 50/60Hz 50/60Hz 50/60Hz
Machine
980W×750D×1150H 1130W×820D×1200H 1150W×980D×1350H 1200W×1100D×1360H
Dimensions(mm)
Spindle Motor 3-phase 1.5kw 3-phase 2.2kw 3-phase 3.7kw 3-phase 3.7kw
-1 -1 -1
Spindle Speed 3,000min 2,800min 2,500min 2,300min-1
Whetstone
Outer diameter× 230Φ×1.2×31.75Φ 255Φ×1.2×31.75Φ 305Φ×1.5×31.75Φ 355Φ×1.5×31.75Φ
Thickness×Hole
diameter(mm)
40W coolant pump, 25- 60W coolant pump, 30- 100W coolant pump, 60- 100W coolant pump, 80-
Cooling Device
liter tank liter tank liter tank liter tank
Vice Opening Double-column clamping Double-column clamping Double-column clamping Double-column clamping
Width 55mm 65mm 80mm 100mm
Horizontal Vice
Fixed/50mm Fixed/70mm Fixed/70mm Fixed/80mm
Movement
Angular Cutting Fixed/25° Fixed/25° Fixed/25° Fixed/25°
Front/Back
0 to 100mm/min 0 to 100mm/min 0 to 100mm/min 0 to 100mm/min
Cutting Speed
Machine Weight Approx. 220kg Approx. 270kg Approx. 310kg Approx. 350kg
※The vice is fixed in models L-6000A, L-7000A, L-8000A, and L-9000A.
The vice is horizontally movable in models L-6100A, L-7100A, L-8100A, and L-9100A.
4
Large Cutters Models LSM-1000UD/1000AUD and LSM-1300UD/1300AUD
■Features
The spindle is moved vertically by a motor by one-touch
operation, enabling cutting of high-height materials and
maximum use of the whetstone even when worn (in both
manual and automatic models).
The vice opens and rotates to the front, back, right and
left to enable cutting, vertical cutting and cutting-to-size
of long materials, irregularly shaped materials, etc.
■Product Specifications
Model LSM-1000UD LSM-1000AUD LSM-1300UD LSM-1300AUD
Max. Cutting Ability 100mmΦ 130mmΦ
Power Supply 3-phase 200/220V 50/60Hz
Whetstone 405Φ×2.5×25.4Φ 455Φ×3.5×25.4Φ
Spindle Motor 3-phase 5.5kw 3-phase 7.5kw
-1
Spindle Speed 2,300min 2,100min-1
Front/Back Movement Manual: 300mm Auto: 300mm Manual: 350mm Auto: 350mm
Front/Back Movement Circular handle/ Circular handle/
Circular handle Circular handle
Handle Changeover Changeover
Front/Back Movement
Cutting motor: 1.5kW; 0 to 100mm stepless speed variation
(Cutting) Speed
Vertical Spindle Movement
0.4kw
Motor
Vertical Spindle Movement Motorized vertical movement: 160mm Motorized vertical movement: 200mm
Coolant Pump/Tank 3-phase 180W/150-liter internally-housed typ 3-phase 280W/200-liter internally-housed type
Safety Cover Partially-steel, front-opening cover (with internal illumination)
Machine Dimensions 900W×1450D×1650H 1200W×1560D×1680H
Machine Weight Approx. 1000kg Approx. 1300kg
※LSM-1000UD and LSM-1300UD are manual front/back cutting models.
5
Hot Mounting Presses (Hot Pressing Models)
Sagging of a sample during grinding/polishing can be prevented by mounting the sample in resin.
The specimen is made easier to hold with the fingers during manual grinding/polishing and stable grinding/polishing
conditions can be realized by setting the specimen in a holder for automatic grinding/polishing.
Hot Mounting is extremely advantageous, especially with small and irregularly shaped materials, and
enables excellent specimen surfaces to be obtained.
A material can be mounted in resin in a short time by hydraulic pressing and heating by a temperature-controlled
heater in the Handy press, Semi-automatic press or Motorized press model.
A hot mounting resin is used as the mounting resin.
The seal is opened for prevention measure of deposition of resin waste.
Adjust the hydraulic pressure for not over pressure.
Attached the heater cover newly.
■Remarks
Please designate the mold size from among the four standard
In case of exchange to a mold of different size, please inquire
because
Semi-Automatic Press Model P-5000 theremold
The maysizes are slightly smaller than inch sizes in
Pressing and gas venting are performed consideration of the holder setting of the specimen polisher.
by push-button operations. Approximately 40 specimens of φ32×25t(mm) size
can be mounted with 1kg of the phenolic resin.
See the page on mounting consumables and coolers in regard
to the mounting resins and coolers.
■Product Specifications
Power Supply 1-phase 100/110V 50/60Hz
Mold Size Φ25 or Φ32 or Φ38 or Φ40(mm)
Heater 1-phase 110V 400W
Temperature Control Digital setting indicator
Standard Mounting Time 6 to 8 minutes(Digital setting)
Motor 430W (60Hz)
Power Consumption
Heater 400W
7
Fully Automated Mounting Device Model FAMP-82S
This device automatically molds a specimen test piece in resin by hot press mounting and unloads the mounted specimen.
A turntable system is provided with a resin amount computing device. 40 specimens can be mounted continuously.
Especially advantageous for mounting of easily tilted materials.
■Product Specifications
Power Supply 3-phase 200/220V 50/60Hz
Air 100 liters/min, 0.4 to 0.5MPa
Mold Size 25Φ or 32Φ or 38Φ or 40Φ(mm)
Pressing Method Hydraulic drive
Mounting Time Max. speed: 6 minutes/specimen
Heater 200V AC 2.7kw water-cooled type
Machine 1700W×925D×1800H
Dimensions(mm) (not including projecting parts)
Weight Approx. 900kg
8
Automatic Epoxy Resin Mounting Device Model RAM-1
Fast, accurate resin-filled molding is performed by automatic injection of a liquid resin (two-liquid mixture)
into a molding die in which a test piece is set.
9
Mounting Consumables and Coolers
Acrylic Resins Thermoplastic resin. Molding is performed by melting by heating and then
2kg, 10kg
(Transparent) molding by cold pressing in a cooler.
10
Specimen polishers
Applicable to various materials ? from metal samples to teeth, bones, plant materials, rocks, ceramics,
■Optional Items
・200φ paper holder ring (for adhesive-free applications)
・200φ buff fastening band (for adhesive-free applications)
11
Wide-use polishers L-6500 Series
Variable-speed, manual-only polishers with a low center of gravity for wide use.
■Optional Items
・200φ and 225φ paper holder rings (for adhesive-free
applications)
・200φ and 225φ buff fastening bands (for adhesive-free
applications)
・225φ PVC disk
・225φ splash-proof cover
・225φ dust-proof cover
12
Specimen polishers
The L-1000, L-2000, L-3000 and L-5000 Series of system polishers are fully equipped with a widely applicable set of
attachments that are culminations of our software aspects of specimen polishing technologies for applications from metal
and non-metal preparations to mirror polishing of ceramic and semiconductor materials as well as petrological and medical
specimens. Tabletop and floor-based models are available.
L-1020 8” two-axis tabletop model 100/120min-1 or 1-phase 100V·200W 770W×540D×405H Approx. 58kg
L-1120 8” two-axis floor-based model 100/120min-1 or 1-phase 100V·200W 770W×540D×960H Approx. 73kg
※Power supply: 1-phase 100/110V 50/60Hz Water supply 1/2” Water drain 1”
※Besides the 8” (205φ) models, 9” (225φ) models are also available.
13
Variable Speed System polishers L-5000 Series
※Power supply: 1-phase 100/110V 50/60Hz (standard), 1-phase·3-phase 200/220V, Also compatible with
50/60Hz. Water supply 1/2” Water drain 1”
※Besides the 8” (205φ) models, 9” (225φ) models are also available.
■Optional Items
・8” (205φ) and 9” (225φ) aluminum disks without hole
■Standard Accessories ・8” and 9” paper holder rings (for adhesive-free applications)
・8” (205φ) aluminum disk with hole/with ・8” and 9” buff fastening bands (for adhesive-free applications)
1pc.
fluororesin(PTFE) coating (per axis)
・Water supply hose (12mmφ × 3m) with joint 1set ・8” and 9” splash-proof covers
・Water drain hose (32mmφ × 1m) with joint ・8” and 9” dust-proof covers
1set
14
System polishers L-2000 Series (with washing bowl)
The wide table with its built-in large washing bowl makes washing easy and provides a wide workspace.
The 8” (205φ) disk diameter is standard for the L-2000 Series, and the 12” (300φ) disk diameter is standard for the L-
3000 Series.
In regard to rotation speed, a selection can be made from among single fixed speed (R), two fixed speed (K), variable
speed pole change (P), and variable speed (V) models.
Attachments (in common to the L-2000 and L-3000 Series) can be mounted.
※ Although the standard power supply for the variable speed models is 1-phase/100V, adaptation to 1-phase/200V
or 3-phase/200V is also possible.
※ 0 to 300min-1 or 0 to 600min-1 can be selected as the rotation speed range of variable speed models. However,
although attachments can be used with the 0 to 300min -1 specification, the 0 to 600min-1 specification is for
manual grinding/polishing only.
・Water drain hose (32mmφ × 1m) with joint 1 set ・8” and 9” buff fastening bands (for adhesive-free applications)
15
■L-2000 Series polisher Specifications (with washing bowl)
Model Product Rotation speed(at 60Hz) Motor output Outer dimensions(mm) Weight
L-2000 100/120R
1-phase 100V·200W
L-2010 8” single-axis tabletop 200/240R
700W×730D×490H Approx. 45kg
model
※V (0 to 300min-1 or 0
L-2050 400W Inverter control
to 600min-1)
L-2100 100/120R
1-phase 100V·200W
L-2110 8” single-axis floor- 200/240R
700W×730D×970H Approx. 60kg
based model
※V(0~300min-1 or 0~
L-2150 400W Inverter control
600min-1)
L-2200 100/120R
L-2300 100/120R
16
System polishers L-3000 Series (with washing bowl)
L-3100 100R
12” single-axis floor- 3-phase 200V·400W Approx.
L-3110 200R 700W×730D×1085H
based model 80kg
L-3150 0 to 250V 400W Inverter control
L-3200 100R
The diverse attachments are prepared under rigorous precision control and can be selected freely and mounted or
exchanged easily. The attachments are available in three types - auto drive, free drive and Stonewell.
18
Metal Sets
■Set Details
The Auto drive sets is extremely useful for performing automatic grinding/polishing and is especially
optimal for resin-molded metal specimens (mold diameter: 25φ, 32φ, 38φ).
The polishing disks are aluminum disks of 8” outer diameter. All are compatible with the main unit
and can be attached/detached easily. Four disks (three for paper and one for cloth) are included as
standard.
The Trimite papers are silicon carbide papers with uniform particles of high wear resistance and high
cutting properties.
The Clearon cloth is made of high quality nylon and is optimal for final polishing of metal samples.
The alumina liquid C (1.0μ) is a liquid suspension of high-purity alumina and is optimal for combined
use with the Clearon cloth.
※ The polishing time can be shortened by using a diamond slurry or paste for polishing after
grinding.
19
Power Auto Drive Device (EADA)
20
Setting Platforms Special specimen Holders
Manual and pneumatic types are available. Diverse specimen holders can be manufactured.
Cascade Tanks
These tanks are for letting solids in drained water settle and discharging the supernatant.
Tanks with a circulation pump are also available.
21
Grinding/polishing Disks
The polishing disks of the above table are all compatible, and attachment and removal can be performed easily by
simply raising the fitting.
Standard sizes of Aluminum disks 8” (205φ), 9” (225φ), and 12” (300φ) are available.
With the fluororesin coated disk, a fluororesin sheet is attached to further facilitate removal of various papers, etc.
Disks with central hole have a hole for setting on a Wingo attachment(ADA).
Disks without central hole (flat Disks) are used EADA, FAS-2, FAS-3 etc and when performing manual
grinding/polishing.
If processed MG to Flat disks, can use MG systems.
Stainless plate (Fluororesin-Coated) scanty and low cost. When stick it on a buff use it for MG System, a merit
appears.
9” disk is recommended for grinding/polishing round materials (when the L-1210 or L-5210 Metal sets is used).
PVC disks can use for L-6050 and L-6500 series. φ225 disk is only L-6500 series.
22
MG (Magnet) System
Recommended particle
Product Process Applicable materials Material
size(µm)
Fine grinding to intermediate
Aka-Plaran 15 to 3 Ferrous metals, ceramics Nylon
polishing
Ferrous metals,
Aka-Daran 15 to 0.25 Fine grinding to final polishing nonferrous metals, Acetate
ceramics
Aka-Paran 15 to 0.25 Fine grinding to final polishing Composite materials Polyester
Aka-Moran 6 to 3 Intermediate polishing Large specimens Wool
Aka-Plural 3 Intermediate polishing Ferrous metals Cured artificial silk
Ferrous metals,
Aka-Napal 3 to 1 Final polishing Artificial silk, velvet
nonferrous metals
Ferrous metals,
nonferrous metals,
Aka-Chemal Silica-based Final polishing Urethane foam
composite materials,
ceramics
23
Applicable Ranges of Disks and Abrasive Particle Diameters According to Material Hardness
Selecting method of Disks and Abrasive Particle Diameters According to Material Hardness
24
Specimen polishers(Special Polishers · Surface Shapers)
We also design and manufacture special machines according to user needs.
■Specifications
Power supply 3-phase 220V/60Hz
Water supply Tap water 20N
25
Automatic polisher
Automatic Pressurized polisher Model FAS-2 ■Specifications
Simple to operate. polishing is performed automatically after Power supply 1-phase 100/110V 50/60Hz
simply setting the time and pressure. Upgraded version of Model
FAS-1. Disk 200φ aluminum MG disk
Diamond grinding/polishing is enabled by employment of 0.4kW Inverter control
the MG system. Holder rotating motor
0 to 300min-1
1-phase 100v 60w 4P Reversible
Holder pressing motor
60min-1 Fixed speed
Pressing force 20 to 300N
Pressing motor 1-phase 100V60W4P With a blake
■Standard Accessories
・φ200 aluminum MG disk 1 set
・Water supply/drain hose (with joint) 1 set
・Specimen holder 1 pc.
・Specimen setting platform 1 unit
■Optional Items
・9” aluminum disk
■Operation Procedure
1 Specimen onto the holder.
Rough ~ midle process are 2~3 process, set the disks on MD Disk. Attach and set the paper onto the disk in consideration
2
of performing the paper process three times.
3 Mount the holder onto the pressing shaft.
4 Set the polishing time within a range of 0 to 30 minutes.
5 Set the polishing pressure within a range of 20 to 300N or 20 to 400N.
6 Turn on the faucet and let a small amount of water drip.
Press the ON switch. (The holder and disk begin to rotate and the pressing shaft descends and contacts the disk to
7
pressurize. The descent stops automatically when the load value is reached.)
8 When the timer reaches zero, the polishing ends and the holder rises.
9 Turn off the faucet.
10 Remove the holder from the pressing shaft, check the polish surface, re-attach, and perform the next process. Exchange the
disk with that for the next process. Repeat the same procedure to perform the Rough~midle process paper process.
11 (Buff process)Set the buffing disk in consideration of performing the buffing process one or two times and drip the polishing
liquid onto the disk surface. The operation procedure is the same as that for the Rough~midle process paper process.
(Immediately after buff polishing, wash the polish surface and dry with a dryer.)
26
Automatic Pressurized polisher Model FAS-3
■Optional Items
・Diamond Slurry Supplying Device
・Rubricant Dripping Device
SIP-10 SIP-50
27
Automatic Surface Shaper Model MEN-300
An efficient automatic surface shaper of high reproducibility. A ■Specifications
specimen set on a holder is ground by a high-speed grinding
whetstone. Power supply 3-phase 200/220V 50/60Hz
Air 0.6MPa
Water 20N
Diamond Manual
28
Automatic polisher with 5-plex Surface Shaper Model FAS-55L
Our most innovative specimen preparation system. Capable of unmanned overnight operation.
A combination system that can prepare any number of specimens completely automatically.
With this system, the number of grinding/polishing processes from surface shaping grinding to final
washing/drying can also be changed.
■Process Flow
29
Specimen Dryers (New Product)
Performs instantaneous drying by strong hot blowing for immediate
prevention of specimen oxidation.
Clean hot air is blown powerfully from a nozzle to instantaneously dry a specimen surface after wet polishing or
etching of a test piece.
Prevents oxidation and dust attachment due to evaporation of water leaching out from cracks, inclusions, etc, of a
specimen.
An air intake filter removes contaminants to allow use even in a dirty air environment.
■Specifications
Model Product Power supply Outer dimensions(mm) Weight
1-phase 100/110V 50/60Hz
Blower 380W
Specimen Quantity of wind Up to 2.0m³/min Approx.
L-1800 W260×D392×H320
dryer 13kg
Wind pressure 12.3kPa
Nozzle inside diameter Φ12mm
Electric power consumption 800W
Model L-1801 is equipped with a foot switch that is convenient for large specimens.
■Features
Can switch between hot air and cold air.
Nozzle direction can be changed freely.
An air filter is attached to the air intake port.
ELB, Temperature-fuse are attached for safty.
Disagree voltage(single plase 115~240V)can manufacture.
However, dimension and weight are changed for add a Trance.
30
Consumable Grinding/polishing Materials
Please select grinding/polishing materials according to the objects to be processed.
Significant effects can be expected from use of Wingo’s consumable grinding/polishing materials.
※ Sizes other than the standard sizes of 8” (200φ,205φ), and 9” (225φ) can be prepared. Please inquire.
※ In ordering papers and cloths, please designate the size, with/without hole, and with/without back surface
adhesive.
31
Alumina Liquids Alumina Powders
Polishing material having high-purity alumina (99.8%) High-purity (99.8%) alumina polishing materials.
suspended in a liquid.
Used for polishing metals upon diluting by 3 to 5 times.
1/4µ
1/2µ
1µ
Content:
Diamond Slurry 3µ
500g
6µ
9µ 1µ
Content:
15µ Aka Paste 3µ
10ml
Lubricant Liquid Content: 1 liter 6µ
32