Professional Documents
Culture Documents
com
B.E.Mechanical Engineering Hand Phone:+65 85336555
Senior Mechanical & Electrical Supervisor
Conspecs Pte Ltd,Singapore
Project 3:
Proposed erection of a 10 storey multi-user industrial factory development (Total 65 units) with ancillary
offices,temporary canteen at 1st storey and basement carpark on LOT00804AMK 11 at 5 Sungei Kadut Street 2
(Sungei Kadut Planning area).Owner:JTC
Project 4:
CAAS VHF Construction of Building & Facilities for Housing Equipment and data centre(Aviation Park
Road),Civil Aviation Authority of Singapore (CAAS).Owner:CAAS
Project 5:
Proposed new erection of a 2-Storey with mezzanine hawker centre with basement and roof garden on LOT01855L
MK14 at Senja Road.Owner:NEA
Project 6:
Proposed Addition&Alteration works to existing 2 blocks of buildings at Matrix and Proteos and Refurbishment &
Redecoration works to existing 7 blocks of buildings at Chromos,Centros,Helios,Nanos,Matrix,Genome & Proteos at
Biopolis.Owner:JTC
Responsibilities:
Performed roles and responsibilities required of site supervisors under the Building Control Act.
To take instruction from Superintending Officer/Consultant.
To ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control
Act and Regulations.
To monitor and report on the progress of works.
To carry out supervision and inspection of the works as directed by the Supervision QP, consultants or Superintending
Officer.
To verify all reports and claims relating to M&E works submitted by the contractors.
To attend contractor’s queries and co-ordinate the works of main contractor.
Carry out site supervision of the inspection of M&E works as Instructed by consultant team to ensure the works are adhere
to the quality.
To check and ensure the contractor executes the preliminary works prior startup of the system works.
To Review all shop drawings/materials/systems submitted by contractors comply with consultant’s drawings, design and
specification.
Check and ensure As-built drawings submissions with respect to the site installation.
Verify reports and claims submitted by contractors.
Provide standing supervision as Instructed by consultant team when required.
To maintain daily work records including test records, Inspection records, status of works,safety,equipment on
site,manpower,materials,site diary etc. and other documentations as required by SO, Architect and Consulting engineers.
Review Architectural, C&S, M&E drawings and report the deviations to consultants and contractors if found.
To record all VO approved by consultant team.
To Inspect and take over completed works.
To check and verify all services routes, contractor setting out and report any deviations to the consultant team and
contractors.
To Assist collating data for weekly site progress report on the status of the site inspection and to issue site memo for the
contractors for any non-conformance of the works.
To provide photo records of all defects and accepted rectification works and incorporate them in to the weekly report.
Witness all M&E system testing and commissioning (T&C) test reports complete with method statement for individual
system.
To carry our M&E defect inspections and update in the master defect list of all the M&E defects with photos in the MS-
Excel.
Supervision of the M&E works ensuring safety and compliance with the design, specification and quality.
Check M&E Submittals for drawings/materials & equipment.
Inspection of materials delivered on site and check compliance with approved materials.
To maintain proper and updated daily records of all works done including records of tests, inspections, status of work,
safety, site diary, material on site and equipment on site, labour force, day works, provisionals quantities etc.
WORK EXPERIENCE-2
Mechcanical &Electrical Supervisor, Black&Veatch (SEA) Pte.Ltd. Singapore
Tenure: Jan 2014 to Oct 2016; Owner: PUB, CWRP (Changi Water Reclamation Project), Singapore
Projects:
Contract -1: Proposed Expansion of Digester and Effluent Pumping Station at Changi Water Reclamation Plant
Contract -2: Proposed Expansion of Membrane Biological Reactor Plant at Changi Water Reclamation Plant
Contract -3: Proposed Second Membrane Bioreactor Retrofit (LM1) at Changi Water Reclamation Plant
Responsibilities:
Review of construction drawings, Piping and Instrumentation diagram, engineering technical submissions.
Study and understand the project contract specifications and tender drawings.
Review of safe work procedure, commissioning plan and operation&maintenance manuals for membranes & anaerobic
digester citing to project contract specifications.
Attend client, contractor meetings for discussing Project progress, commissioning plan reviews.
Inspection of delivery, fabrication, erection & installation of piping, structural, equipments like pumps, air receivers, fine
screen, membrane cassettes and steel structures.
Liaise with contractors & clients for tie-In, shutdown, testing and commissioning works.
Liaise with process, design, contractors, vendors, suppliers&clients.
Monitor project progress according to the planned schedule.
Coordinating, witnessing and documentation with vendors for FAT, Factory Acceptance Test.
Ensure the quality of mechanical Installation works are according to the approved drawings and project contract
specifications.
Monitor project progress according to the planned schedule.
Coordinating interfacing works with civil, mechanical and instrumentation team.
Witnessing performance test, SAT (Site Acceptance Test & commissioning of chemical dosing systems, air
compressors ,RAS,WAS,SCUM Systems, MBR (GE) systems, mixers and double containment piping systems by LOCAL
and SCADA controls.
Witnessing Commissioning of digester mechanical Items such as mixing system pumps, sludge heating system, fire alarm,
air conditioning and mechanical ventilation systems &fire sprinkler by LOCAL and SCADA controls.
Prepare defects list with photos and close it with rectified photos before handover.
To implement and ensure WSH, workplace safety and health at worksite
WORK EXPERIENCE-3
Mechanical Supervisor, MUNSIONG ENGINEERING Ltd., Singapore
Tenure: Nov 2011 – Nov 2013.
Project: SHDS-OSBL (Singapore Hydro De-Sulphurization and Facilities Project-Outside Battery Limit)
Owner:Exxon Mobil,Jurong Island,Singapore
Responsibilities:
Line Inspection of various piping service systems with respect to hydro test pack.
Interpret piping drawings, Structural drawings, Isometric drawings & general assembly drawings.
Execution of hydro testing and pneumatic testing for process piping systems and utility piping systems.
Supervising fabrication and erection of structure, process piping and utility piping in exxon mobil SHDS-OSBL project
and track the work progress with the approved project schedule.
Monitor and record daily work progress and manpower at project site in Microsoft excel worksheet.
Preparation of manpower reports and report to the project manager.
Working with testing & inspection team of foster wheeler and exxon mobil quality control team for hydrotest and
installation inspection of piping and structures.
Maintaining records for fabrication, welding, cutting, welding consumables and tools.
Manages all aspects of a piping department including supervising and coordinating all preparation, installation,
modification, and testing for piping system components per applicable drawings, codes and project specifications.
Supervising all piping installation work activities are performed safely and efficiently.
Preparing weld summary, daily welding reports for fabrication and erection of piping works in Microsoft excel worksheet.
Preparation of test packages and reports as per the client foster wheeler requirements.
Arranging for radiographic testing, third party inspections according to the client foster wheeler’s requirements.
Coordinating with the client foster wheeler area project engineer.
Supervise the shop and site fabrication works.
Apply permit to work for all the erection and installation works at project site.
Conducting tool box meetings prior to startup of work.
Preparing and participating in risk assessment.
Supervised the erection of piping and structures are based on the approved technical drawings, project specifications and
safe work procedures to ensure project requirements are carried out safely and effectively.
Verify materials, consumables, fit-up, welding, repair work, weld profiles and work completion is in compliance with
welding procedure standards.
Carried out punch killing activities after receiving the site walk down from the client foster wheeler.
Coordinating the commissioning team for the pre-commissioning & commissioning works like flushing, leak test, air-
drying, nitrogen purging and catalyst loading.
WORK EXPERIENCE-4
M&E Engineer with Winhuat Engineering Works Pte. Ltd. Singapore
Tenure: April 2011-Aug 2011
Owner: Avanstrate Asia Singapore
Project: Addition and Alteration works at existing Factory building (Clean room)
Responsibilities:
Performed roles and responsibilities required of site supervisors under the Building Control Act
To take instruction from Superintending Officer/Consultant
To ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control
Act and Regulations
To monitor and report on the progress of works
To carry out inspection of mechanical and engineering works prior to concreting or subsequent construction works
To carry out inspection on defects rectification works
To carry out supervision and inspection of the works as directed by the Supervision QP, CRE, consultants or
Superintending Officer
To ensure that records of all mechanical and engineering works including records of tests, defect rectification, inspections,
work progress, material and equipment on site, safety, etc, are timely updated and properly kept
To attend site, progress, variation and coordination meetings
To verify all reports and claims relating to M&E works submitted by the contractors
To liaise with all relevant authorities
To verify reports and claims submitted by contractors.
To maintain proper and updated daily records of all works done including records of tests, inspections, status of work,
safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional
quantities etc.
To keep accurate record of variations as instructed or approved by the Superintending Officer and to maintain a set of
updated drawings on site
To check all drawings (including shop drawings, construction drawings and specifications for discrepancies and to report
to the Supervision QP, consultants or Superintending Officer.
WORK EXPERIENCE-5
M&E Engineer, PETROLEUM TECHNICIANS SOCIETY, India
Tenure: Aug 2010-Mar 2011
Owner: Airport Authority of India (AAI) Chennai Airport, Chennai
Project: M&E Works for the new construction of new airport terminal (Domestic&International)
Responsibilities:
Carry out progress monitoring, site supervision and inspection, quality control of construction work on site ensuring it is
carried out to the approved drawings, specifications, local standards, authority regulations and requirements.
Handle contractors’ queries, reports and verify progress claims within the provisions of the Building Regulations
Provide regular progress on the works as per contractor’s approved program, including any non-compliance reports
To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for
discrepancies and report to the Superintending Officer/Consultant /Qualified Person
To prepare defect lists,monitor progress of rectification works and ensure all defects are satisfactorily rectified
To prepare As built drawings after system completion
To Liaise with main contractors for the resolving site Issues and clashings
To assess the progress claims based on the site progress
WORK EXPERIENCE-6
M&E Engineer for SK ENGINEERING & CONSTRUCTIONS, KUWAIT
Tenure: July 2008-July 2010
Owner: Kuwait International Airport
Project: Addition&Alteration works of M&E works at Kuwait International Airport
Responsibilities:
Site Erection, Installation, Testing and Commissioning of chilled water Piping and pump systems
Assist in installation, commissioning, repair & maintenance
Conduct regular on-site inspections of on-going works to ensure that contractors adhere to established work procedures
such as end-to-end testing, installation standards and safety work processes
Monitoring and overseeing in-house technicians & contractors during onsite technical operations
Track that all installation appointments and work orders are fulfilled and delivered on time
Manage M&E Sub Contractors and drafters to ensure construction are done according to M&E drawings and coordinate
M&E details with Clients, Consultants, Sub - contractors and other site staff.
Prepare M&E Master Construction Schedule, CSD and Structural Penetration for approval.
Review M&E Design Drawings and identify discrepancies between M&E, Structural, ID, Architectural and Client
provisions.
Review and align M&E Design Drawings to ensure compliance with design specification and guidelines
Ensure M&E works are well coordinated with the Consultant to meet any Authorities Requirements.
WORKEXPERIENCE-7
M&E Engineer for IDEAL INDUSTRIES PTE.LTD. India
Tenure: June 2006-June 2008
Owner: Airport Authority of India (AAI) Trichy Airport, Trichy
Project: M&E Works for the new construction of new airport terminal (International)
Responsibilities:
Responsible for technical, organizational and supervisory representative for the construction site
Assisting the Project Manager for the designs to be positioned, installed and keep track of the progress of M&E activities
on site
Carry out progress monitoring, site supervision and inspection, quality control of construction work on site ensuring it is
carried out to the approved drawings, specifications, local standards, authority regulations and requirements
Planning & Scheduling of Site Installation, testing & Commissioning
Responsible for interfacing between the Main contractor and subcontractors when M&E activities on site are executed.
The site engineer should be able to ensure arrived materials are according design and specifications
Supervision of works of to ensure the sub-contractors are following the local regulations, main-contractor regulations and
safety and health regulations
Preparation of daily reports/time sheet
Coordinating for Installation and testing witness with client representative
SKILLS &ABILITIES:
Proactive, Versatile and strongly believe in team work
Analytically strong and adaptable
Proven problem solving skills
Quick learner and able to keep up the pace of the schedule
Proven leadership qualities by handling projects, teams and actively involving in organizing activities
Good leadership, planning, organizational, Communication and interpersonal skills
Experienced with Microsoft tools like Excel, Power point, Word,Autocad and SAP
Declaration:
I hereby declare that the above information is true to the best of my knowledge
Yours Truly,
Dhananjayan RK