Professional Documents
Culture Documents
Dam formwork
Crane-lifted climbing formwork for one-sided applications www.doka.com
Crane-lifted climbing formwork for one-sided applications
Dam formwork is used for forming one-sided construction projects, such as dams, barrages, river power stations or pylons without
formwork ties. The climbing tower will transfer all pouring loads into the previous pouring section. Different system variants D12,
D15, D22 and D35 facilitate economic adaptation to various project-specific block dimensions.
Efficient forming from the start by using the same form- Secure attachment to structure due to heavy duty suspen-
work for starting blocks and regular cycles sion points
Shorter periods of crane commitment due to rapid lifting of Safe working conditions resulting from closed and gener-
climbing tower and formwork as one unit ously dimensioned working platforms up to 2.80 m wide
Quick and precise formwork installation in every direction Safe climbing and descending between platforms due to
due to easy adjustment options ladder system that can be integrated
Project-specific solutions
due to different system variants
A selection of different system options D12, D15, D22 and D35 renders Doka Dam formwork an economic standard solution for block heights up to 5 m.
Art. no. 931447002 // 10/2021-10/22 en-EAP-ID
PT. Doka Formwork Indonesia | South Quarter Tower A | 18th Floor | JI. RA Kartini Kav 8 | Cilandak | Jakarta Selatan | DKI Jakarta 12430 | Indonesia | T +62 2150856070
indonesia@doka.com | www.doka.com