Professional Documents
Culture Documents
A Site Clearance
Clearing the site off grass, shrubs and all vegetation and the like; cart away
as directed ; to apprved site SM
Excavations
B Excavate oversite to remove top vegetable soil average 250 deep and
spread as directed on site sm
C Exacavate for foundation strip footing in normal soil not exceeding depth
1.5m deep. CM
E Ditto column pits 0-1.5 deep CM
F Ditto over 1.5 but n.e 3m deep CM
G Return fill and ram selected excavated material around foundations. CM
H Load , wheel and cart away from site surplus excavate material and deposit
in approved dumpinmg area. CM
A Labour and material for construction joints in 12mm thick flexel expansion
and 25x25mm expansion sealer at every 20m in 200mm wide columns LM
200mm wide ; B.S 743 Type A bitumen hessian base 150mm laps (No
B allowance made for laps); horizontal , 1 no. layer, bedded in cement sand
(1:3) mortar. LM
Weep Holes
C Allow for creating 100mm diameter weep holes at ground level at
averageing 2m centers to centers on masonry wall. NO
Reinforcement
High Tensile ribbed bars Bs 4461 as describe in ;
D Assorted reinforcement Kgs
Insitu Finishing
E 14mm thick 2 No. coatwork cement sand (1:3) render; wood floated to
concrete or blockwork SM
A 200mm thick machine cut walling ;bedded and jointed in cement sand (1:3)
mortar; reinforced with hoop iron at every two courses SM
B Labour and material for construction joints in 12mm thick flexel expansion
sealer at every 15m in approx 200mm wide columns. LM
C Extra-over for pointing and Keying in recessed horizontal and in 2 coats
black bituminous paint to recessed joints SM
Insitu finishings
14mm thick 2 No. coatwork cement sand (1:3) render; wood floated to
D concrete or blockwork as directed as base to wall ; external
SM
Painting and decoration
Prepare and apply three coats exterior quaility paint to "Crown Barger" or
equal and approved to ;
E wood float render plinths over 300mm girth SM
Vibrated reinforced insitu concrete class 20/20mm as described
F Columns CM
G Beams CM
A Supply and fix bars reinforcement including bending , hooks , tying wire,
cutting spacers and supporting all in position as described . Kgs
Stone Facing
A Provide and joint in cement; sand (1:3) 300mm wide precast concrete
coping weathered to four fall and throated on all sides or pire. LM
Razor wire
Supply and fix razor wire along perimeter wall and /or as directed on site
intwo layers conforming to the following minimum specification ;-coil size
D size 750mm diameter , blade profile -ripper razor wire,stretch factor -
max.10m per coil and secured with and including 40x40x3mm thick x
450mm long angle iron welded on 100x100x4mm steel plates insert at 1m cc
(galvanized) all to manufactures instructions LM