Professional Documents
Culture Documents
2
associated plans
View 1-1 plan-No.
T210105114-
plan title:
Waler reinforcement Longitudinal Bars Detail
scale 1:25
200 200 200 200 200 200 155 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200
500
330
170
40 Clear Cover
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
NOTES:
1. All dimensions are in millimeters unless otherwise specified.
2. Grade of the concrete shall be M35.
294
2 1 1 5. Lap length shall be 50 times of the diameter of the bar and to be staggered (clause 17A.4.2.7).
6. Allowable maximum aggregate size is 20 mm.
406
7. When bars of two different diameters are to be coupled, the lap length shall be calculated on the basis
of diameter of the smaller bar.
8. Only 50% of the bars shall be coupled at any particular cross section and another 50% of bars shall be
5 6 Spiral bar
12 @ 60 c\c at 1.3 times the lap length calculated.
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 9. As per above IS code (Technical specifications) referral and design aspect, considering the staggering
on coupling/lapping = 50D.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10. Diameter of anchor hole is 152mm and the Diameter of outer PVC pipe is 200mm
11. Anchor Hole of PVC pipes should be 200mm outer diameter with class 3 or 4 (thickness of 8mm to
200 200 200 200 200 361 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300
10mm) model inside the Waller beam.
12. Waler beam reinforcement around PVC pipe can be adjusted as per site requirement.
2
13. This drawing is applicable from E.L +363.00m to E.L +378.00m lvl.
14.Stirrups spacing shall be maintained as per design and shall be adjusted at anchor location to
5000
10000 suit site condition.
1d 7 Ø 25 Used codes to create the Reinfrocement plans:
1c 7 Ø 25 L = 5000 1. IS 456(2000):Plain and Reinforced Concrete-Code of Practice.
1b 7 Ø 25 L = 10000 overlap overlap
1a 7 Ø 25 L = 8000 1300 mm 1400 mm 2. IS 2911-1-2: Design and Construction of Pile Foundations—Code of Practice.
3. SP 16(1980):Design Aids for Reinforced Concrete.
300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 Detail section
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 View 1-1
M 1:25
0
300
31
520
0
31
294
240
150
620
700
2 1 420
340
150
406
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 420
420
230
230
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 1 Ø 16 / 200 L = 2290 150
5
300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 6 Spiral bar 420
4 12 @ 60 c\c 5 1 Ø 16 / 200 L = 1600
1
6000
12000
12000
1d 7 Ø 25 L = 6000
overlap overlap 1 7 Ø 25 L = 12000 overlap
1 7 Ø 25 L = 12000 Detail section
1400 mm 1250 mm 1250 mm
View 2-2
M 1:25
10 1 Ø 16 / 200 L = 1995
500 9
118 382 300
300
40 Clear Cover
450
450
620
525
475
15
15
2
180
700
0
1
0
420 420
39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
225
420
9 1 Ø 16 / 200 L = 2270
230
230
150
500
420
11
11 1 Ø 16 / 200 L = 1600
6 Spiral bar 12Ø @ 60 C/C
10
200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200
2m 1 0 1
M 1:25
12000
1 7 Ø 25
12000
L = 12000
± 0,00 =
overlap overlap
1250 mm 1e 7 Ø 25 L = 12000 1250 mm ALL DIMENSIONS AND SERVICES
HAVE TO BE CONFIRMED ON SITE !
CHANGE DESIGNED BY SITE ENGINEER DATE INDEX
Initial creation of the waler reinforcement G. D'AlessandroPurushothaman Y. 02.01.2023 -
Changed pile wall alignment from P1-1 to P1-20 and
from P1-72 to P1-80 as per site conditions G. D'AlessandroPurushothaman Y. 13.01.2023 A
changed waler beam reinforcement stirrups spacing Ramakrishnan.R Purushothaman Y. 29.03.2023
P1-74 to P1-80 B
Revised as per NHPC commands Ramakrishnan.RPurushothaman Y. 27.04.2023 C
THIS DRAWING IS UNDER COPYRIGHT AND IS NOT TO BE COPIED OR PRESENTED TO UNAUTHORIZED PARTIES WITHOUT SPECIAL PERMISSION:
4500
11360
Waler Reinforcement Stirrups Details
1h 7 Ø 25 L = 11360 SCALE : DRAWN : G. D'Alessandro DATE : 02.01.2023
overlap 1f 7 Ø 25 L = 6000 overlap 1f 7 Ø 25 L = 6000 overlap
1g 7 Ø 25 L = 4500 1:50
1250 mm 1250 mm 1250 mm
CHECKED : Vetriselvan A. DATE : 02.01.2023
PROJECT DRAWING
NO.: NO.: T 21 01 05 115 E