Professional Documents
Culture Documents
The line segments show where the slice plane intersects with mesh element faces. The
end points of each line segment are located where the plane intersects mesh element
edges.
9. Right-click a blank area in the viewer and select Predefined Camera > View Towards
-Z.
The image shown below can be used for comparison with tutorial 2 (in the section
Creating a Slice Plane (p. 68)), where a refined mesh is used.
2. Click Apply.
Hot water (red) enters from one inlet and cold water (blue) from the other.
ANSYS CFX Tutorials. ANSYS CFX Release 11.0. © 1996-2006 ANSYS Europe, Ltd. All rights reserved. Page 23
Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.