S
Operating Instructions
LGF-1300 a
For LGF-1600 Drilling Pumps
Sichuan GaoSheng Machinery Manufacturing Company, Ltd.
Tel: (028)85730676 or (028)85730698
E-mail : SCGSJX@126.com
Add : Jiaolong Industrial Zone, Shuangliu Country, Chengdu, ChinaPreface.
Overview.....
Technical Specifications.
Displacement vs. Pressure...
Installation of New Pump......
Requirements for Suction System.
Preparation of Power End...
Spray Pump Assembly..
Assembly of Main Components of Fluid End.....
Disassembly and Assembly of Main Components of Power End.....15
Lubrication.
Installation, Start-up, and Running Monitoring...............
Maintenance. 24
Troubleshooting...
Notes for Storage...
Lubrication Oil and Lubrication Grease for the Pump sone T
Catalog of LGF-1300/1600 Drilling Pump Components.Preface
This Operating Instructions for LGF-1300/1600 drilling pumps is a complete technical document
provided for users. Purpose of editing the information is to give accurate data and key operating points
to the users. It is necessary for repair, maintenance and test running of the drilling pump. This manual
is provided to users, maintenance service workers, and service technicians, to help them to be
thoroughly acquainted with the drilling pumps.
It is impossible to mention all situations within the limited pages. However, users can get good
and satisfactory mechanical operating methods and safety precautions hereby.
Alll specifications are provided in accordance with engineering designs and must be strictly
observed. When operating or servicing equipment manufactured by others their operating instructions
must be observed,
Sichuan Gao Sheng Machinery Manufacturing Company reserves the right to stop production of
any type of drilling pump, or to change the drilling pump design without further notice and any
responsibility thereby.
If there is any incompleteness in this manual, criticisms and suggestions are welcome,
Editor1, Overview
LGF-1300/1600 drilling pump is a horizontal triplex single-acting piston pump, and consists of
two main parts: Power end and fluid end. It is characterized by advanced structure, small in size, high
reliability, better interchangeability and easy maintenance. The consumable accessories, bearings,
sealing parts, and technical parameters of this pump are the same as those of the F-type pumps with
same specifications.
2. Technical Specifications
type | Parameters of | Parameters of — LGF-1600
No. LGF-1300 drilling | drilling pump
Parameters pump
1 Form Horizontal triplex single-acting piston pump
2 | Rated input power kw(hp) | 960(1300) 1180(1600)
3 | Rated strokes 120SPM
Stroke length * Max.
4 cylinder liner diameter 305x180mm(12" *7.0867" )
S| Gear type Herringbone tooth
6 | Gear ratio 4.206:1
7 | Lubrication Positive and spray lubrication
8 | Suction connection size | 12” Flange (~30Smm)
9 _| Discharge connection size | 5¥,” flange 5000#API (1300mm flange 35MPa)
Pinion shaft diameter and
10 215.9%337mm(8 "fy" «13 A”
extension length
11 | Key connection size 50.8%50.8mm(2” *2” )
12. | Valve chamber size API 74
13, | Outline dimensions 4615%3260%2004mm
th width height ;
Glength swidth height) | agi yy" 21.28%" x784"
14. | Base width length 1880x4426mm(74" <174'%" )
15. | Pump weight 25850kg/569591b | 25850kg/569591b3. Displacement vs. Pressure
Diamar of cylinder Tiner and rated pressure
Pitan | 6% I7imm | 61'I6smm | €is2mm | 312" Amm | Sam
‘Strokes LGF-1300 2786192 | 2998 206 | 3230 22.2 | 379226.1 | 4517 31.1 | 3000345
raion | od ome | os _xm | i om] ot oom | om
minute 3429236 3689254 | 3977274 | 4667322 3000345 | 500034.5
(SPM) teen, psi MPa | psi MPa, psi MPa | psi MPa | psi MPa | psi MPa
Nominal power
LGF-1300 | LGF-1600 Displacement
vattnp | 733% | TOG | —nsGrM | cop | SeGeM | aarceM | Sonar
ad 1049 kw 1292 kw. 49.19 LIS 45.74 LIS. 4241 LIS. 36.14 L/S 30.37 L/S 25.10 LIS.
van | BHOm | 160% | ra0GeM | eso aeM | —