Professional Documents
Culture Documents
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
LESSON 1: DRAFTING ARCHITECTURAL LAYOUT AND DETAILS (AL)
1. Drafting tools, materials, The learners demonstrate an The learners shall be able LO 1. Prepare architectural TLE_ICTTD9- Week1
and equipment understanding of to job requirements 12AL-Ia-1
2. Industry Standards and concepts and principles in the prepare architectural 1.1 Prepare tools, materials,
Operating Procedures preparation of architectural layout and details based and equipment in
3. Architectural layout and details on established industry technical drawing
3.1 Job requirements and/or job requirements 1.2 Select drawing tools,
3.2 Electrical terms materials, and equipment
and symbols in accordance with the
3.3 Working drawings SOP
1.3 Assess architectural job
requirements based on
SOP
1.4 Interpret blueprint
according to architectural
layout drawing/job
requirements following
SOP and work instructions
4. OHS policies and LO 2. Prepare and set up TLE_ICTTD9- Week2
procedures tools and materials for 12AL-Ib-2
laws drawing
4.1 Personal safety 2.1 Observe OHS policies and
4.2 Workplace hazards procedures in setting-up
4.3 Environment laws tools and materials for
5. Setting up drawing drawing
equipment 2.2 Prepare drawing tools,
6. Layouting drawings and materials and equipment
details based on job requirements
2.3 Set up tools, materials,
and equipment based on
the job requirements
Page 1 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
7. Theory and concepts of LO 3. Draft site TLE_ICTTD9- Week 3 to 5
site development plan development plan 12AL-Ic-e-3
7.1 Site Plans
7.2 Azimuth 3.1 Draw a technical descrip-
7.3 Coordinate planes tion of a lot according to
8. Title block and borders the approved lot survey
9. Alphabet of lines 3.2 Draw a building footprint
10. Lettering according to the
11. Notes and legends of architectural drafting
architectural plans and standards
standards 3.3 Draw a title block
12. Layouting, according to the
dimensioning, and architectural drafting
scaling standards
13. Grading conventions 3.4 Indicate dimension lines,
and symbols dimensions, and drawing
titles according to
architectural drafting
standards
14. Floor plan features LO 4. Draft floor plans TLE_ICTTD9- Week 6-10
15. Floor planning scale 4.1 Draw walls, windows, 12AL-If-j-4
16. Schedule of doors and doors, fixtures, and fittings
windows according to architectural
17. Architectural floor design standards
symbols 4.2 Draw grid and dimension
lines according to
architectural design
standards
4.3 Use metric scale system
according to the
magnitude of the plan
Page 2 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
4.4 Identify sizes of doors,
walls, and rooms following
the schedule
Indicate letterings and
labels according to the
drafting standards
Page 3 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
26. Operational definition/ LO 7. Draft elevations and TLE_ICTTD9- Week 17-19
terminology of sections 12AL-IIg-i-7
elevations and sections 7.1 Draw vertical heights from
27. Architectural detailing grade line according to
and sectioning architectural drafting
28. Different house views standards
and elevations 7.2 Project offsets from right,
29. Detailing techniques left, and rear sides of
floor plan according to
architectural drafting
standards
7.3 Draw roof eaves and
pitch on all elevations and
sections according to
architectural drafting
standards
7.4 Project doors and windows
in all elevations and
sections
7.5 Project cross and longitu-
dinal section views from the
floor plans and elevations
7.6 Indicate various material
symbols and specifications
in all elevations and
sections
Page 4 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
26. Dimensions and LO 8. Submit complete TLE_ICTTD9- Week 20
markings drawings 12AL-IIj-8
27. Company rules and 8.1 Follow the SOP when
regulations submitting the completed
28. Re-work procedures drawing to appropriate
29. Clean-up activities personnel (e.g., Engineer,
30. Housekeeping Architect)
8.2 Note comments and
corrections for final
drawings following the
SOP
8.3 Integrate comments and
corrections into the final
drawing based on job
requirements
8.4 Perform housekeeping
procedures following the
SOP
LESSON 2: DRAFTING STRUCTURAL LAYOUT AND DETAILS (SL)
1. Definition of structural The learners demonstrate an The learners shall be able LO 1. Draft foundation TLE_ICTTD9- Week 21-22
terms understanding of to plans 12SL-IIIa-b-1
2. Different structures and concepts and principles in draft structural layout and 1.1 Indicate the locations of
details drafting structural layout and details following the job wall footings, footings,
3. Structural drawing details requirements and columns in drafting
standards the floor plan
1.2 Draw in a larger scale
details of wall footings,
footings, and columns
4. Operational definition/ LO 2. Draft structural floors TLE_ICTTD9- Week23-25
terminology of floors and roof framing plans 12SL-IIIc-e-2
and roof framing plans 2.1 Draft structural floor and
5. Structural drawing roof framing plans based
standards on floor and foundation
5.1 timber plans using timber,
Page 5 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
5.2 concrete concrete, or steel
5.3 steel construction
6. Structural floor plans 2.2 Draft structural floor and
and standards roof beams showing sizes,
7. Roof-framing plan shapes, and detailed
standards connections
1. Operational definition/ The learners demonstrate an The learners shall be able LO 1. Draft electrical plans TLE_ICTTD9- Week 26-27
terminology of electrical understanding of to draft electrical and and layouts 12EL-IIIf-g-1
and electronic layout concepts and principles in electronic layout and 1.1 Draft lighting and power
and details drafting electrical and details following the job layouts according to
2. Electrical drawing electronic layout and details requirements electrical drafting
standards standards
3. Philippine Electrical 1.2 Place riser diagram and
Code circuiting symbols in
4. National Building Code electrical plans and layouts
5. Fire Code according to Electrical
Code
1.3 Indicate legend and
general notes according to
local power service
provider
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
according to electrical
drafting requirements
Page 7 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
Grade 10/ Grade 12
LESSON 1: PREPARING COMPUTER-AIDED DRAWING (CA)
1. Basic CAD concepts The learners demonstrate an The learners shall be able LO 1. Operate CAD TLE_ICTTD9-12CA-Ia- Week 1-2
2. Operational definition/ understanding of to software and computer b-1
terminologies on floors concepts and underlying prepare CAD based on hardware
and roof framing plans principles in the preparation established industry 1.1 Identify CAD software
3. CAD working environment of CAD. and/or job requirements features according to
4. CAD Features the software provider
4.1 Commands 1.2 Explore CAD working
4.2 Tools environment
4.3 Dimensions
4.4 Hardware 1.3 Manipulate CAD TLE_ICTTD9-12CA-Ic-j- Week 3-10
4.5 Manipulations features as per job 2
4.6 Plotting requirement
4.7 Editing
4.8 Attributes
4.9 Object linking and
embedding
4.10 Modifications
5. Occupational Health and LO 2. Prepare plan using TLE_ICTTD9-12CA-IIa- Week 11-20
Safety (OHS) policies and CAD j-2
procedures 2.1 Observe OHS policies
OHS laws and procedures in
5.1 Personal safety when preparing plan
5.2 Workplace hazards using CAD
5.3 Environment laws 2.2 Set up drawings
6. Title block according to standard
7. Plates drawing scale and
8. Scale paper size
9. Building standards 2.3 Prepare working
drawings using CAD
software as per
building standards
Page 8 of 10
K to 12 BASIC EDUCATION MELC (Most Essential Learning Competencies)
TECHNICAL LIVELIHOOD EDUCATION AND SENIOR HIGH SCHOOL
TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – TECHNICAL DRAFTING (NC II)
Grade 9, 10, 11 and 12
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
LESSON 2: DRAFTING STRUCTURAL LAYOUT AND DETAILS USING CAD (LC)
1. Definition of structural The learners demonstrate an The learners shall be able LO 1. Draft foundation TLE_ICTTD9-12LC- Week 21-22
terms understanding of to plans IIIa-b-1
2. Different structures and concepts and principles in draft structural layout and 1.1 Indicate the locations
details drafting structural layout and details following the job of wall footings,
3. Structural drawing details requirements footings, and columns
standards in drafting the floor
plan
1.2 Draw on a larger scale
details of wall footings,
footings, and columns
PERFORMANCE
CONTENT CONTENT STANDARD LEARNING COMPETENCIES CODE Duration
STANDARD
4. National Building Code 1.2 Place riser diagram
5. Fire Code and circuiting symbols
in electrical plans and
layouts according to
Electrical Code
1.3 Indicate legend and
general notes
according to local
power service provider
6. Auxiliary systems LO 2. Draft auxiliary TLE_ICTTD9-12EC- Week 28-30
equipment system and layout IIIh-j-2
7. Philippine Electrical Code 2.1 Layout fire alarm and
8. National Building Code protection system
9. Fire Code symbols in the
auxiliary system and
layout plan according
to Fire Code
2.2 Layout electronic and
communication devices
according to electrical
drafting requirements
ENTREPRENEURSHIP Week 31-32
Prepared:
CECILIA A. CARAAN
Teacher III
Halang Banaybanay Integrated School
Amadeo, Cavite
Page 10 of 10