Professional Documents
Culture Documents
Customer : 深圳市嘉立創科技發展有限公司
Contents
Introduction ………………………………………………………………………………………Page
3.0 Structure……………………………….………………………………………….………….5
File Name:
Date 2014.2.11 Edition No. 1
CHIP SERIES ±0.5%,±1%,±2%,±5%& 0Ω
1.0 Scope:
This specification for approve relates to the Lead-Free Thick Film Chip Resistors manufactured by
UNIOHM.
2.0 Ratings & Dimension:
01005、0201、0402 0603、0805、1206、1210、1812、2010、2512
01005 1/32W 0.40±0.02 0.20±0.02 0.13±0.02 0.10±0.05 0.10±0.03 -- 10Ω-10MΩ 10Ω-10MΩ 10Ω-10MΩ
0201 1/20W 0.60±0.03 0.30±0.03 0.23±0.03 0.10±0.05 0.15±0.05 -- 1Ω-10MΩ 1Ω-10MΩ 1Ω-10MΩ
0402 1/16W 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 1Ω-10MΩ 0.2Ω~22MΩ 0.2Ω~22MΩ 0.2Ω~22MΩ
0603 1/10W 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 1Ω-10MΩ 0.1Ω~33MΩ 0.1Ω~33MΩ 0.1Ω~100MΩ
+0.15
0805 1/8W 2.00±0.15 1.25 0.55±0.10 0.40±0.20 0.40±0.20 1Ω-10MΩ 0.1Ω~33MΩ 0.1Ω~33MΩ 0.1Ω~100MΩ
-0.10
+0.15
1206 1/4W 3.10±0.15 1.55 0.55±0.10 0.45±0.20 0.45±0.20 1Ω-10MΩ 0.1Ω~33MΩ 0.1Ω~33MΩ 0.1Ω~100MΩ
-0.10
1/3W
1210 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 1Ω-10MΩ 0.1Ω~10MΩ 0.1Ω~22MΩ 0.1Ω~100MΩ
1/2W
1/2W
1812 4.50±0.20 3.20±0.20 0.55±0.20 0.50±0.20 0.50±0.20 1Ω-10MΩ 0.11Ω-10MΩ 0.1Ω-10MΩ 0.1Ω-10MΩ
3/4W-S
1/2W
2010 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 1Ω-10MΩ 0.1Ω~22MΩ 0.1Ω~22MΩ 0.1Ω~22MΩ
3/4W-S
2512 1W 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.50±0.20 1Ω-10MΩ 0.1Ω~33MΩ 0.1Ω~33MΩ 0.1Ω~33MΩ
2.2 Ratings
Max。 Max。 Dielectric Resistance Rated Max。Rated
70℃ Operating
Type Working Overload withstanding Value of Current of Current of
Power Temperature
Voltage Voltage Voltage Jumper Jumper Jumper
1/3W
1210 200V 500V 500V <50mΩ 2A 10A -55℃~155℃
1/2W
1/2W
1812 200V 500V 500V <50mΩ 2A 10A -55℃~155℃
3/4W-S
1/2W
2010 200V 500V 500V <50mΩ 2A 10A -55℃~155℃
3/4W-S
3.0 Structure:
4.0 Marking:
(1) For 01005、0201 and 0402 size. Due to the very small size of the resistor’s body, there is no marking on the
body.
Example:
01005、0201、0402
(2) ±2%,5%Tolerance:The first two digits are significant figures of resistance and the third denotes number of
zeros following
Example:
33000 33K
(3) ±2%、5%Tolerance: Below 10 show as following, read alphabet”R” as decimal point.
Example:
2R2 2.2
(4) ±0.5%、1% Tolerance: 4 digits, first three digits are significant; forth digit is number of zeros. Letter r is decimal
point.
(5) standard E-24 and not belong to E-96 series values(in ±0.5%、±1%tolerance)of 0603 size the marking is the
same as 5% tolerance but marking as underline
333=3300033K 68068
(6) Product below 1Ω,show as following, the first digit is“R”which as decimal point.
R300.3Ω
(7) Standard E-96 series values (±0.5%、±1% tolerance) of 0603 size. Due the small size of the resistor’s body, 3
digits marking will be used to indicate the accurate resistance value by using the following multiplier & resistance
code.
Multiplier code:
Code A B C D E F G H X Y Z
0 1 2 3 4 5 6 7 -1 -2 -3
Multiplier 10 10 10 10 10 10 10 10 10 10 10
Coding formula
First two digits------------Resistance code Third digit-------------------Multiplier code
(8) 0ΩMarking:
Normally for 01005、0201 and 0402 size, no marking on the body:
Normally, the making of 0 0603, 0 0805, 0 1206, 0 1210, 0 1812, 0 2010, 0 2512 resistors as
following
±0.5%,1% ±(0.5%+0.05 )Max 4.19Resistance change after continuous five cycles for duty
cycle specified below:
Step Temperature Time
◎ Temperature
±2%,5% ±(1.0%+0.05 ) Max 1 -55℃±3℃ 30 mins
cycling
2 Room temp. 10 --- 15 mins
3 +155℃±2℃ 30 mins
01005 ±(1%+0.05Ω) Max 4 Room temp. 10 --- 15 mins
◎ Soldering Resistance change rate is: 4.18 Dip the resistor into a solder bath having a temperature
heat ±(1%+0.05Ω) Max of 260℃5℃ and hold it for 10±1 seconds.
9.0 Packaging:
9.1 Tapping Dimension:
Unit: mm
+0.1
Type A B C±0.05 ΦD E±0.1 F±0.05 G±0.1 W±0.2 T±0.1
-0
01005 0.24±0.05 0.45±0.05 2.00 1.50 1.75 3.50 4.00 8.00 0.40
0201 0.40±0.05 0.70±0.05 2.00 1.50 1.75 3.50 4.00 8.00 0.42
0402 0.65±0.20 1.15±0.20 2.00 1.50 1.75 3.50 4.00 8.00 0.45
Unit: mm
+0.1
Type A ±0.2 B ±0.2 C±0.05 ΦD E±0.1 F±0.05 G±0.1 W±0.2 T±0.1
-0
0603 1.10 1.90 2.00 1.50 1.75 3.50 4.00 8.00 0.67
0805 1.65 2.40 2.00 1.50 1.75 3.50 4.00 8.00 0.81
1206 2.00 3.60 2.00 1.50 1.75 3.50 4.00 8.00 0.81
1210 2.80 3.50 2.00 1.50 1.75 3.50 4.00 8.00 0.75
2010 2.80 5.40 2.00 1.50 1.75 5.50 4.00 12.00 0.75
Unit: mm
+ 0.1 +0.25
Type A0.2 B0.2 C0.05 D D1 E0.1 F0.05 G0.1 W0.2 T±0.1
-0 -0
1812 3.50 4.80 2.00 1.50 1.50 1.75 5.50 4.00 12.00 1.00
2512 3.50 6.70 2.00 1.50 1.50 1.75 5.50 4.00 12.00 1.00
9.2 Dimension:
Unit: mm
Type Taping Qty/Reel A0.5 B0.5 C0.5 D1 M2 W1
01005 Paper 20,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
0201 Paper 10,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
0402 Paper 10,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
0603 Paper 5,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
0805 Paper 5,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
1206 Paper 5,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
1210 Paper 5,000pcs 2.0 13.0 21.0 60.0 178.0 10.0
2010 Paper or Embossed 4,000pcs 2.0 13.0 21.0 60.0 178.0 13.8
1812 Embossed 4,000pcs 2.0 13.0 21.0 60.0 178.0 13.8
2512 Embossed 4,000pcs 2.0 13.0 21.0 60.0 178.0 13.8