Professional Documents
Culture Documents
X-Manager·View
April 2019
Contents
1 Introduction
2 Client Configuration
3 Call Management
4 File Management
5 Configuration Management
6 X–View
2
1. Introduction
▪ Creation of User Account
[Join] button: Create a new user account, and login after admin verification.
3
1. Introduction
▪ Main GUI
User Menu
Main Menu
Sub Menu
Main Page
4
1. Introduction
▪ Main GUI
[User Menu]: The basic menus for using the X-Manager·View.
1 2
1
3 4
5
2. Client Configuration
▪ Monitoring
[Overall View]: Monitor the status and location of X-Remote in map in real time.
6
2. Client Configuration
▪ Monitoring
[Filter]: Select Client Type & Status display to list.
[Notice]: Display events that occurred on clients registered in list. (Only today)
7
2. Client Configuration
▪ Monitoring
[Signal Strength]: Monitor KPI and alarm event in map.
KPI Summaries contents Show/Hide
Data Real-Time Tracing ON / OFF
8
2. Client Configuration
▪ Monitoring
[Scanner ]: When scanner device is linked with server, it will be displayed in client List and mark up a balloon on the map.
If the aof file contains scanner data, displayed it on the Log File List page.
9
2. Client Configuration
▪ Monitoring
[Signal Strength]: [Alarm Event] monitors location and type of events.
Monitoring the Alarm Event of the selected X-Remote/XCAL in map and list
10
2. Client Configuration
▪ Monitoring
[Map Setting]: button edits items being displayed in map.
[Common] item
- Legend data display
- Site icon display
- Select the type of parameter to display [Alarm Event] item
- Markup balloon to display - Display per Alarm Event type
11
2. Client Configuration
▪ Monitoring
“The Live Monitoring” monitors the test client data in real time.
Three layouts : Call Information & Key Parameters (Table) / Client location & Alarm (Map) / RF Parameter (Graph)
12
2. Client Configuration
▪ Real Time Monitoring
Various data such as the test client status, Cell Measurement Info, Status/Statistics and Key Parameters of test clients in Live
Monitoring are monitored in map, table, and graph in real time. (Data is displayed during measuring status)
Test Start / Stop buttons
Monitoring the Alarm Event of the selected X-Remote in map and list
13
2. Client Configuration
▪ Group Monitoring
Real Time Monitoring of one or more clients to display RF value and location. (Data is displayed during measuring status)
When you click the button, a popup is created Setting Layout type & parameter
that displays the L3 Message as a table. * The reference value set in the Parameter tab is displayed as red mark of the table.
14
2. Client Configuration
▪ L3 Message
When the “RRC / NAS” button is clicked, it displays the RRC / NAS message of clients logged.
(Message is displayed during measuring status)
Pause : L3 message display will be paused.
Delete message contents displayed in table Resume : L3 message display will be resumed. Copy detail message and raw date to clipboard
15
2. Client Configuration
▪ Client Status/Setting
[Multi Client Viewer]: Monitor and control multiple X-Remote/XCAL in detail.
16
2. Client Configuration
▪ Client Status/Setting
[Multi Client Viewer]: Filter and display “Fail uploaded” if any and Notice/Filter it
List of uploaded failed files. Display events that occurred to clients registered in list. (Only today) Select Client Type & Status display to list
17
2. Client Configuration
▪ Client Status/Setting
[Multi Client Viewer]: Filter and display client list and control scenario / autocall command.
18
2. Client Configuration
▪ Client Status/Setting
[Multi Client Viewer]: Monitor to sum and average of kpi values of clients. Also, show serving site as a line for each client.
19
2. Client Configuration
▪ Client Status/Setting
[Multi Client Viewer]: Display Client status / Alarm event / Detail info / Scenario / Network / Model / phy. cell id / Signal
strength of multiple X-Remote/XCAL clients.
20
2. Client Configuration
▪ Client Status/Setting Model / Phone Number / Version
Operator / Current Status / DM Router Status
GPS data / Storage Space / Battery Status
[Client Status]: Monitor each X-Remote/XCAL in detail. Current location display in Map
21
2. Client Configuration
▪ Client Status / Setting
[Client Setting]: [Control] tab to support “remote control” feature for X-Remote/XCAL.
#2 X-Remote Logmask
#3 X-Remote setting option
#4 test plan option
#5 test region option
#6 test drive route option
Transfer #1 ~ #6 remotely
22
2. Client Configuration
▪ Client Status / Setting
[Client Setting - Communications with Client] monitors communication history between X-Remote/XCAL and X-Manager in
real time.
Display messages in pause status
23
2. Client Configuration
▪ Client Status / Setting
[Configuration]: Configure and apply options of X-Remote.
- List of the configured Mobile Setting - Configure the save path of the configuration file, file format, and etc.
- Select X-Remote and click [Apply] button to apply the setting. - Save TTS Alarm setting.
24
2. Client Configuration
▪ Client Placement
[Relocation]: Edit list to display X-Remote/XCAL.
25
2. Client Configuration
▪ Client Placement
[Group Setting]: Create and manage multiple X-Remote groups (per Login user account).
Click [Apply] button and the settings configured Drag and drop a X-Remote/XCAL icon to the created
in the field on the right will be applied and group name, it is to be included in the selected group.
displayed in the corresponding list.
26
2. Client Configuration
▪ Client List
[Right Click Menu]: Right click on the mouse to operate three functions: Call control, Add in Group and Client Log File Control
1
Command autocall start/stop or
manual logging start/stop by client
27
3. Call Management
▪ Call Scenario
[Scenario List]: Create, edit, delete, and manage the call scenario for test.
28
3. Call Management
▪ Call Scenario
[Add Scenario]: Create, edit, delete, and manage the call scenario for test.
2
1 Search the scenario file to register.
Click to register.
29
3. Call Management
▪ Call Scenario
[Logmask List]: Create, delete, and manage the logmask setting for client.
30
3. Call Management
▪ Call Scenario
[Add logmask setting file ]: Create, delete, and manage the logmask setting for client. (X-Remote Series Only)
2
1 Search the logmask setting file to register.
Click to register.
31
3. Call Management
▪ Call Scenario
[Scenario Group]: Transfer the setting configured remotely per Project/Group.
Selection of
Project / Group
#2 X-Remote Logmask
32
3. Call Management
▪ Scenario Edit
[Web Scenario Editor]: Create a call scenario for a test. The created scenario is managed in Scenario List.
33
3. Call Management
▪ Call Test Automation
[Work Order List]: Create, edit, delete the Test UE /Scenario/Setting/Plan/Area at once.
34
3. Call Management
▪ Call Test Automation
[Work Order Editor] – [Basics]: Input basic information of the editor and test.
35
3. Call Management
▪ Call Test Automation
[Work Order Editor] – [Clients]: Select X-Remote/XCAL to apply.
36
3. Call Management
▪ Call Test Automation
[Work Order Editor] – [Settings]: Configure Mobile Setting / Measurement Plan / Area to apply / Drive Route / Report Setting.
* Report Type
➔ By operator : Classify log file per operator and generate report by operator.
* Processed Data Type
➔ By operator : Classify log file per operator and generate processed data by operator.
➔ In the case of “Once after Work Order completion” only
37
3. Call Management
▪ Call Test Automation
[Work Order Editor] – [Summary]: Verify all configurations in advance of the final submission.
38
3. Call Management
▪ Call Test Automation
[Measurement Plan]: Register and manage the plan for test schedule.
39
4. File Management
▪ Log File Manager
[Log File List]: Display and manage the log file uploaded from X-Remote/XCAL by date/type/client ID/project.
40
4. File Management
▪ Log File Manager
[Building List]: Display and manage list of building information for indoor measurement files uploaded to X-Manager.
41
4. File Management
▪ Map Files
[Area View]: Draw test region in map, and save in the file to transfer to X-Remote.
List of test region to edit and delete Test region in map in polygon shape - Drawing Type / Autocall Pause setting
- Drawing option setting
- Click [Save] to create a file.
42
4. File Management
▪ Map Files
[Drive Route Setting]: Configure and manage the test drive route.
[Create] button: Open the [Drive
Route Drawing] screen.
43
4. File Management
▪ Map Files
[Drive Route Drawing]: Draw the test drive route by selecting points in map.
44
5. Configuration Management
▪ General Settings
[Account Manager]: Manage user account registered to X-Manager.
45
5. Configuration Management
▪ General Settings
[Display Setting]: Edit and delete Legend for map.
Per tech and parameter Creation, edition, deletion of Legend Interval / Color
46
5. Configuration Management
▪ General Settings
[Site Manager]: Manage site data to be displayed in map.
47
5. Configuration Management
▪ General Settings
[MtoM Call Setting]: Setting Org/Ter client & scenario and control autocall for MtoM measurement.
How to setting Step 1/2/3/4. * Step 4.
To activate the MtoM Start / Stop button, click the Refresh button.
1) Refresh
➔ Ready MtoM measurement.
2) MtoM Start / Stop
Select project ➔ Start MtoM measurement Add MtoM Group Set (Max : 20)
➔ Stop MtoM measurement
48
5. Configuration Management
▪ Admin Settings
[Server Configuration]: Configure and manage options for Server.
Configuration of cycle to periodically upload from X-Remote/XCAL Set to delay time for displayed in Group monitoring
Set the maximum number of clients to connect to the server (by Project / Client Type)
Set to enable / disable displayed report type of x-view for each project
(Role = System Administrator)
49
5. Configuration Management
▪ Admin Settings
[Server Configuration]: Configure and manage options for Server.
50
5. Configuration Management
▪ Admin Settings
[Client Version Setting]: Manage client version of X-Remote/XCAL to register, apply, download, delete and copy a link.
51
5. Configuration Management
▪ Admin Settings
[Client Version List]
52
5. Configuration Management
▪ Admin Settings
[History & Version Status]
53
5. Configuration Management
▪ Admin Settings
[Alarm Notification Setting] : Setting to send SMS of client event and status reporting.
54
5. Configuration Management
▪ Admin Settings
[Alarm Notification Setting] : How to set Step 1.
* Step 1.
1) Select Client Event and Status value to receive SMS transmission.
2) After Checkbox checked, click “Apply” button to complete the application.
3) The selected value is the data periodically uploaded by the client. If X-Manager has data to be uploaded every minute, it commands to send SMS.
4) If the same Event & Status is maintained continuously(since the SMS is continuously transmitted every minute), set the time to not send SMS command by
type. The corresponding time value means the time interval from the first SMS command to the second SMS.
* Setting time (time value depends on major and minor contents, Offline / No Response does not set time)
a. DM Router Error : 2minutes
b. Low Battery : 2minutes
c. Free Storage : 2minutes
d. GPS Unlock : 5minutes
e. App Installing : 5minutes
f. Measuring : 5minutes
g. Uploading : 5minutes
h. Standby : 10minutes
55
5. Configuration Management
▪ Admin Settings
[Alarm Notification Setting] : How to setting Step 2/3/4.
* Step 2.
1) SMS Sender Client
➔ Select “Client ID” to send SMS
➔ Only On “Client ID” can be selected.
➔ It must be a client with X-Remote installed.
2) Notice to message Clients
➔ Select the “Client ID” to upload the value selected in the “Notice List”
➔ Multiple “Client ID” can be selected
➔ It must be a client with X-Remote installed.
* Step 3.
1) SMS Reported Administrators
➔ Setting to register mobile phone number to receive SMS.
➔ Click the Setting button to register in the Admin Setting window.
➔ Up to 5 Mobile Phone Numbers can be registered.
2) Admin Setting
➔ Checkbox check to enable fields.
➔ Enter Name / Mobile Phone Number / Company / Region.
➔ When OK button is clicked, Checkbox checked input is applied.
➔ After click the OK button, forward the Mobile Phone Number to the SMS
Sender Client. (Internally conducted content)
* Step 4.
History (for checking SMS history)
1-1) ReportedMessage
➔ Check the data uploaded to X-Manager by Client ID selected in "Notice to
message Clients“.
1-2) SMS Result
➔ Proceed with SMS transmission and check the result.
2) Refresh Button
➔ Function to update “History” item value
56
5. Configuration Management
▪ Admin Settings
[Operator Setting]: Create and manage operator value.
Edit of EARFCN
57
5. Configuration Management
▪ Operator Setting
Configure operators options to monitor summarized statistics result per EARFCN of each operator in X-View.
Once MCC/MNC per operator is configured at first, EARFCN is registered according to technology type.
58
5. Configuration Management
▪ Admin Settings
[File Manage Setting]: Create and manage operator value.
59
6. X-View
▪ Outdoor Test – Summary View
Summary View displays measurement result per EARFCN of each operator without additional processing in a short time.
60
6. X-View
▪ Outdoor Test – Summary View
Summary View is composed of multiple fields. (including map)
1. Display statistics of Call & ETSI & RCA & Network to pie chart
2. Display KPIs of each service to PDF/ CDF Chart and table
3. Display RF Quality to graph and table & Each KPI PDF/CDF chart & Network analysis by RF KPIs
61
6. X-View
▪ Outdoor Test – Summary View
Summary View is composed of multiple fields.
4. Display L1,L2 parameter data per EARFCN
5. Display L3 event result with icon on the map
6. Display Chipset event/ RRE result with icon on the map
(File list : Display event occurred time and download log file)
62
6. X-View
▪ Outdoor Test – Summary View
If the service type is VoLTE, VoLTE / MOS Tap are displayed. (In case of Voice, MOS Tap is displayed.)
7. Display VoLTE data related RTP and Mute result with icon on the map.
(File list : Display mute event occurred time and download log file)
8. Display MOS result with icon on the map.
63
6. X-View
▪ Outdoor Test – Summary View
Display measurement route with site info on the map.
64
6. X-View
▪ Outdoor Test – Call Table
Call Table lists up statistics of all calls measured within the searched date in table.
- Users are allowed to monitor the statistics data of the desired parameters configured in [Column Setting].
- Test log file can be downloaded.
- The calls with event encountered can be analyzed in detail by syncing XCAP-Enterprise.
65
6. X-View
▪ Outdoor Test – Call Table (MOS Detail)
To find MOS measurement file data, if you click icon, MOS result is displayed in detail.
- Display the MOS measurement statistical results by call.
- Display pcm graph based on MOS recording wave file.
- Play / Stop and download for MOS recording wave file.
66
6. X-View
▪ Outdoor Test – Call Table (XCAP Enterprise)
For a call result other than success, if the detail analysis is required, the XCAP Enterprise icon will be activated when you upload
a drm file mapped to aof file.
- XCAP Enterprise ] : Execute XCAP Enterprise Tool to analyze per call (XCAP Enterprise must be installed in user pc)
- [RCA Report ] : Download RCA Report file. (In case of RCA cause)
67
6. X-View
▪ Outdoor Test – Call Table (Map)
Display RF Parameter and call event contents as a map with statistics of collected call data.
- [Export Map] : Export values for RF Data in three types. (TAB / CSV / KML)
- [Spider] : Connect a line between the measured data location and the service site.
68
6. X-View
▪ Outdoor Test – Call Table (Map)
Display RF Parameter and call event contents as a map with statistics of collected call data.
- [Export to Excel] : Data of Map and Table are created as an excel file, and the file is downloaded.
69
6. X-View
▪ Outdoor Test – Call Table
Displays statistics of the collected call data in table along with graph.
To display the graph, check the row of call in the table.
70
6. X-View
▪ Outdoor Test – Processed Data Management
Processed data management displays measurement result with more KPIs by additional processing.
- [Create] : Configure search option for process item. Up to 4 case can be set in a group
- [Refresh] : Update “Status” column value
- [Setting] : Process item will be process at a set time. Also, It will be deleted automatically after retention period
71
6. X-View
▪ Outdoor Test – Processed Data Management
-[ File List] : In the “Create” window, a list of the files that are processed is displayed.
-[ View] : Display results for the processed data created in the “Create” window. (created as a new tab, name is “Detail View”)
-[ Re-process] : It can reprocess an already created result.
(For the purpose of reprocessing after correction if there is a problem in processing)
-[ Delete] : It can delete an already created result.
72
6. X-View
▪ Outdoor Test – Processed Data Management
“Detail View” displays measurement result with statistics and binned data on the map.
- [On the left side] : Display statistics/ KPI each service/ RF quality/ L1L2
- [On the right side] : Display map tree for select KPI to display on the map
73
6. X-View
▪ Outdoor Test – Processed Data Management
Display binned data on the map and support 3 types of bin size.
Display map tree for select KPI to display on the map
74
6. X-View
▪ Outdoor Test – Processed Data Management
Display scanner data on the map and support GSM/UMTS/LTE of techs. Select parameters from the tree by tech / frequency
(Max : 4 parameters)
75
6. X-View
▪ Outdoor Test – Report Management
Create and manage reports on outdoor measurement files. Support Voice, VoLTE, FTP, Ping, HTTP, Youtube, Email
SMS, Iperf, Speed Test
76
6. X-View
▪ Outdoor Test – Report Management
- [Create] : Search for files by Date / Operator / RTU ID / Service / Tech.
Create a report for the selected file.
- [KPI] : Display map tree for select KPI to display on the map
Check the setting value of Pass / Fail condition of KPI Result in the report contents.
The report name contains the service type of the measurement file used to create it
77
6. X-View
▪ Outdoor Test – Report Management
The contents of the report include the summary / KPI result / parameter on the map, summary & statistics result by service
type, Success/Failure of the handover.
78
6. X-View
▪ Indoor Test – Inbuilding Analysis
Daily building test result is displayed per floor.
Report of each building is published, and test result per floor is displayed.
79
6. X-View
▪ Indoor Test – Inbuilding Analysis
[Summary]
Test result of the building selected in the Building List is displayed per floor.
Once a floor is selected, the corresponding test data is displayed in the floor map.
80
6. X-View
▪ Indoor Test – Inbuilding Analysis
[Call Table]
Call statistics information of the selected log is displayed by configuring Column Setting.
Log list can be selected per floor, and the floor map is changed once a floor is changed.
81
6. X-View
▪ Indoor Test – Inbuilding Analysis
[Graph]
[All Graph]: Display all parameter value of the selected floor. Floor map changes once different floor is selected.
[Log Graph]: List up the log of the selected floor, and parameters of the selected log are displayed. Log graph can be added up to
4 graphs and can be deleted.
Log
Graph
82
6. X-View
▪ Indoor Test – Inbuilding Analysis
[File List] : List up the log files of the selected floor, and parameters of the selected floor are displayed.
- Download : Download a indoor measurement logfile
- Reprocess : Reprocess an already processed result
- Export : Output “File List” column value to csv file
- Delete : Delete indoor measurement logfile and processed result
83
6. X-View
▪ Inbuilding – Inbuilding Analysis
[Report]
Report button allows users to download the test report of the selected building.
Report includes floor sheets and display test data in the floor map.
84