You are on page 1of 1

Index Messages Flow Entities IE's in Msg NAS Layer RRC LAYER PDCP LAYER RLC Mode Channel

NAS Layer RRC LAYER PDCP LAYER RLC Mode Channel Mapping SRB LOCATION
EMM ESM RRC IDLE RRC CONNECTED
Last Symbol of Slot
1 PSS Enb to UE RSSI ENERGY Or Enb list "--" "--" YES NO "--" TM "--" "--" 0 and 10, 6 PRB in
Central Frequency

Second Last
Symbol of Slot 0
2 SSS Enb to UE Frame Boundary,Cyclic Prefix,PCI ID "--" "--" YES NO "--" TM "--" "--" and 10, 6 PRB in
Central Frequency
First Four Symbol
in second slot in
3 MIB Enb to UE SFN,BW,PHICH Configuration "--" "--" YES NO "--" TM BCCH>BCH>PBCH "--" first Subframe,
6PRB in Central
Frequency
PLMN Identity, p-Max, TAC, cellidentity,
cellbarred,IntraFreqReselection,q-
4 SIB1 Enb to UE RxLevMin, q-RxLevMinOffset, Other SIBs
"--" "--" YES NO "--" TM "--"
Info
Radio Resources Configuration Info like
5 SIB2 Enb to UE RACH info, ULSCH Config, DL-SCH Config, "--" "--" YES NO "--" TM "--"
uplink power control, UE Timers
Cell Reselection Parameter for INTRA,
INTER Freq & IRAT - q-Hyst,
6 SIB3 Enb to UE s_NonIntraSearch, threshServingLow, "--" "--" YES NO "--" TM "--"
cellReselectionPriority, SIB can be
q_RxLevMin,s_IntraSearch,p-Max
received in
Cell Reselection Parameter for
7 SIB4 Enb to UE Neighbouring INTRA Frequency.
"--" "--" YES NO "--" TM "--" any of the
Cell Reslection Parameter for INTER sub-frame as
Frequency- q-RxLevMin, dlcarrierFreq, p- BCCH>DLSCH>PDSCH
8 SIB5 Enb to UE Max, threshX-High, threshX-Low,
"--" "--" YES NO "--" TM "--" mentioned
neighCellConfig, cellreselectionpriority in the
Cell Reselection Parameter for INTER
9 SIB6 Enb to UE "--" "--" YES NO "--" TM "--" window
RAT(UTRAN)
Cell Reselection Parameter for INTER length
10 SIB7 Enb to UE RAT(GERAN)
"--" "--" YES NO "--" TM "--"
Cell Reselection Parameter for INTER
11 SIB8 Enb to UE RAT(WCDMA 2000)
"--" "--" YES NO "--" TM "--"
12 SIB9 Enb to UE HOME ENODEB PARAMETER "--" "--" YES NO "--" TM "--"
13 SIB10&11 Enb to UE ETWS Primary and Secondary Notification "--" "--" YES NO "--" TM "--"
It is used to fast return to LTE from
14 SIB19 Enb to UE WCDMA. It specifies LTE frequencies and "--" "--" YES NO "--" TM "--"
priorities
In Uplink
15 RACH Request(MSG1) UE to Enb RA-RNTI, RAPID "--" "--" NO NO "--" No Mode PRACH>RACH "--" Channel 6 RBs
between the
16 RACH Response(MSG2) Enb to UE T-CRNTI, TA, DCI-0 "--" "--" NO NO "--" No Mode RACH>PDSCH "--" PUCCH and
PUSCH
RRC Connection C-RNTI, ESTABLISHMENT CAUSE (mo, mt,
17 UE to Enb "--" "--" YES "--" TM UL-SCH>UL-CCCH SRB0 "--"
Request(MSG3) mo data, emergency)

RRC Connection C-RNTI, PHR config, BSR config, DL-SCH, UL-


18 Enb to UE "--" "--" "--" YES "--" TM DL-CCCH>DL-SCH SRB0 "--"
Setup(MSG4) SCH, Uplink power control dedicated info

RRC Connection Setup


19 UE to Enb Registered PLMN, NAS dedicated info "--" "--" "--" YES "--" AM UL-SCH>UL-DCCH SRB1 "--"
Complete(MSG5)
EPS attach type, EPS mobile identity, UE
network capability, ESM message
container, Old P-TMSI signature,
Attach Request, Initial Additional GUTI, Last visited registered
20 Enb to MME "--" "--" "--" NO "--" AM "--" "--" "--"
Context Setup TAI, DRX parameter, Old location area
identification, Additional update type,
Voice domain preference and UE's usage
setting etc
21 Authentication Request MME to HSS IMSI, SNID, Network Type YES NO "--" NO "--" AM "--" "--" "--"
AUTN Token, RANDOM VALUE, XRES,
22 Authentication Response HSS to MME KASMI
YES NO "--" NO "--" AM "--" "--" "--"

23 Authentication Request MME to UE AUTN Token, RANDOM Value, KSI-ASMI YES NO "--" NO "--" AM "--" "--" "--"

24 Authentication Response UE to MME RES YES NO "--" NO "--" AM "--" "--" "--"
NAS Intigrity Algorithm, NAS cyphering
25 NAS Security Request MME to UE Algorithm, KSI-ASMI
YES NO "--" NO YES AM "--" SRB1 "--"
26 NAS Security Response UE to MME NAS Message Authentication Code YES NO "--" NO YES AM "--" SRB1 "--"
Origin, Destination, User Name = IMSI,
27 Update Location Request MME to HSS Visited PLMN Id
YES NO "--" NO "--" AM "--" "--" "--"

HSS to Old
28 Cancel Location IMSI Cancellation Type YES NO "--" NO "--" AM "--" "--" "--"
MME
Old MME to
29 Cancel Location Ack IMSI YES NO "--" NO "--" AM "--" "--" "--"
HSS
Update Location IMSI,MSISDN,APN = PDN Gateway
30 HSS to MME YES NO "--" NO "--" AM "--" "--" "--"
Response Address,QCI, AMBR(UL,DL)

ARP,QCI,MSISDN,TAI,PGW IP ADDRESS,
31 Create Session Request MME to SGW PDN IP ADDRESS, APN
NO YES "--" NO "--" AM "--" "--" "--"

Create Default Bearer IMSI,MSISDN,APN,Serving Gateway


32 SGW to PGW NO YES "--" NO "--" AM "--" "--" "--"
Request Address

Create Default Bearer PDN Gateway User Plane Address, PDN


33 PGW to SGW NO YES "--" NO "--" AM "--" "--" "--"
Response GW TEID User & Control Plane

The message contains maximum bit rate


information for the UE. Quality of service
34 Create Session Response SGW to MME information for the new eRAB is also NO YES "--" NO "--" AM "--" "--" "--"
specified (QCI, maximum bit rate downlink
and uplink).
Attach Accept, Initial EPS Attach Result,ESM Message
Container,GUTI Reallocation,TAI List,EMM
35 Context Setup MME TO Enb Cause,EPS network feature
NO YES "--" NO "--" AM "--" "--" "--"
Request,Activated support,Additional update result

RRC Security Mode Ciphering Algorithm - EEA1, Integrity


36 Enb to UE Algorithm - EIA1, Message Authentication NO YES "--" NO YES AM "--" SRB1 "--"
Command Request Code - I (AS Integrity protected)

RRC Security Mode Message Authentication Code - I (AS


37 UE to Enb NO YES "--" NO YES AM "--" SRB1 "--"
Command Response Integrity protected)

RRC Connection
EPS Radio Bearer Identity, RLC Mode,
38 Reconfiguration Msg, Enb to UE PDCP Sequence Number
NO YES "--" NO "--" AM DL-SCH>DL-DCCH SRB1 "--"
Attach Accept
RRC Connection
Reconfiguration Message is used to confirm the successful
39 Complete,Initial Context UE to Enb completion of an RRC CONNECTION NO YES "--" NO "--" AM UL-SCH>UL-DCCH SRB1 "--"
RECONFIGURATION
Setup Response,Attach
Complete

Regards Abhishek

You might also like