Professional Documents
Culture Documents
Evaluation - Attempt Review
Evaluation - Attempt Review
Dashboard / Courses / Even Semester 2022-23 / UG Core / ECE222 / MWE LAB Daily Evaluation / Evaluation
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 1/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 1
Complete
a. Bend
b. Circulator
c. H Plane Tee
d. Matched Termination
e. E Plane Tee
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 2/14
2/27/23, 8:01 PM Evaluation: Attempt review
f. Movable Short
g. SS Tunner
i. Gunn Diode
j. Diode Detector
k. Directional Coupler
Question 2
Not answered
A three-port component f given power at port 3 the power is divided equally in port 1 and 2. The phase shift between port 3 and 1 and port
3 and 2 is the same. The the componnet is
a. H Plane Tee
b. Magic Tee
c. Circulator
d. E Plane Tee
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 3/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 3
Complete
a. SS Tunner
c. E Plane Tee
d. H Plane Tee
e. twister
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 4/14
2/27/23, 8:01 PM Evaluation: Attempt review
f. Diode Detector
g. Matched Termination
h. Directional Coupler
i. Movable Short
j. Gunn Diode
k. Circulator
Question 4
Complete
a. 8-12 GHz
b. 8-12.4 GHz
c. 1-2 GHz
d. 4-8 GHz
e. 2-4 GHz
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 5/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 5
Not answered
a. Matched Termination
b. H Plane Tee
c. Gunn Diode
d. Circulator
e. Bend
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 6/14
2/27/23, 8:01 PM Evaluation: Attempt review
g. E Plane Tee
h. Movable Short
i. SS Tunner
j. Diode Detector
k. Directional Coupler
Question 6
Not answered
b. By plate-to-cathode feedback
Question 7
Not answered
a. Velocity modulation at the input cavity creates density modulation at the output cavity
b. Phase modulation at the input cavity creates velocity modulation at the output cavity.
c. Frequency modulation at the input cavity creates velocity modulation at the output cavity
d. Density modulation at the input cavity creates velocity modulation at the output cavity
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 7/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 8
Not answered
a. 25-30%
b. 40%
c. 58.2%
d. 22.7%
Question 9
Not answered
a. Gunn Diode
b. Reflex Klystron
Question 10
Not answered
The klystron tube used in a klystron amplifier is a _________ type beam amplifier.
a. Crossed field
b. Linear beam
d. Parallel field
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 8/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 11
Not answered
In Gunn diode oscillator, the Gunn diode is not inserted into a waveguide cavity formed by a short circuit termination at one end
Select one:
True
False
Question 12
Not answered
In a Gunn diode oscillator, the electron drift velocity was found to be 107 cm/second and the effective length is 20 microns, then the intrinsic
frequency is:
a. 5 GHZ
b. 8 GHZ
c. 7 GHZ
d. 6 GHZ
Question 13
Not answered
The mode of operation in which the Gunn diode is not stable is:
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 9/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 14
Not answered
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 10/14
2/27/23, 8:01 PM Evaluation: Attempt review
c. bulk device
d. sliced device
Question 15
Not answered
In the Gunn diode characteristics the value of peak voltage ( where current is peak) is around
a. 10 V
b. 3.5 V
c. 1.5 V
d. 6 V
Question 16
Not answered
a. between 3-10
b. between 1-3
c. 1-10
d. greater than 10
Question 17
Not answered
a. 1.5
b. 0.8
c. 1.1
d. 1.2
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 11/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 18
Not answered
Question 19
Not answered
If SWR=1.5 with a wavelength of 4 cm and the distance between load and first minima is 1.48cm, then the reflection coefficient is:
a. 0.0128
b. 0.26+j0.16
c. 0.00126+j0.1996
d. None
Question 20
Not answered
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 12/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 21
Not answered
A slotted line can be used to measure _____ and the distance of _____________ from the load.
Question 22
Not answered
b. 8-12.4 GHz
d. 8-12 GHz
Question 23
Not answered
a. 0.05
b. 0.01
c. 0.1
d. 0.001
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 13/14
2/27/23, 8:01 PM Evaluation: Attempt review
Question 24
Not answered
b. Π/2*(d2-d1) d1 and d2 are distance of first and second minima from load
d. 2*Π/(d2-d1) d1 and d2 are distance of first and second minima from load
Question 25
Not answered
In the frequency and wavelength measurement experiment if you need to plot ω-β and also calculate error in the frequency measured how
many column should be there in your observation table excluding sl no
a. 12
b. 10
c. 9
d. 11
◄ Announcements
Jump to...
https://moodle.lnmiit.ac.in/moodle/mod/quiz/review.php?attempt=245612&cmid=5425 14/14