ALGERIA Slickline Post-Job Truck Service Checklist Document Number: Region: Function/PSL: FO-ALG-HAL-SL-601 Algeria WPS - Slickline Owner: Approved By: Job Revision By: Rev Date: Rev No: Page: Mohamed El Shafei Mohamed Hassan Parampal Singh Madhok 17-Feb-2022 B 1 of 1
Post-Job Truck Service Checklist
Unit No._________12483279 ______ Date:____________08/06/2023___ Location:_____________HDA 14__________ Use the following Inspection Code ( ) OK ( O ) Follow up repairs made ( X ) Adjustments made To be performed within 24 hours after job completion. ( ) Clean unit using detergent and water (or steam) and allow to dry. ( ) Lube reel brake linkage with grease and oil. ( ) Lube levelwind assembly with grease. Use light oil on vertical wire guide rollers. ( ) Lube counter wheel. ( ) Lube hay pulley. ( ) Lube wire (on reels) with environmentally friendly oil. ( ) Lube door and panel hinges with light oil. ( ) Check engine hours to determine if oil and oil filter change is required. ( ) Visually check unit for needed repairs. ( ) Check that hydraulic fluid level is 4 inches from top; fill as needed (FM/D3/AC-4 specified oil or ATF type F fluid only). ( ) Check return and supercharge filter change indicators. ( ) Check that supercharge pressure is 320 psi (+/- 40). ( ) Fill stuffing box hand pump reservoir with ATF type F. Also fill auxiliary well control hand pump reservoir (if equipped). ( ) Fill chemical tanks as required. ( ) Fill injection grease reservoir as required (if equipped). ( ) Check unit lighting, replace burned out bulbs. ( ) Check that all safety equipment is present and functional. COMPLETED BY: (Employee #)_____said zeghidi_______ Signature:_______________________________________ Comments:______________________________________________________ ________________________________________________________________________