The document is a post-job truck service checklist for a slickline unit used in Algeria. It contains a list of inspection items to be completed within 24 hours of a job to clean and service the unit. Key items include cleaning the unit, lubricating moving parts, checking fluid levels, replacing filters, ensuring proper pressures, and checking safety equipment. Upon completion, the employee signs off after noting that the horn, crane switch, and some gauges were not working and required follow up.
The document is a post-job truck service checklist for a slickline unit used in Algeria. It contains a list of inspection items to be completed within 24 hours of a job to clean and service the unit. Key items include cleaning the unit, lubricating moving parts, checking fluid levels, replacing filters, ensuring proper pressures, and checking safety equipment. Upon completion, the employee signs off after noting that the horn, crane switch, and some gauges were not working and required follow up.
The document is a post-job truck service checklist for a slickline unit used in Algeria. It contains a list of inspection items to be completed within 24 hours of a job to clean and service the unit. Key items include cleaning the unit, lubricating moving parts, checking fluid levels, replacing filters, ensuring proper pressures, and checking safety equipment. Upon completion, the employee signs off after noting that the horn, crane switch, and some gauges were not working and required follow up.
ALGERIA Slickline Post-Job Truck Service Checklist Document Number: Region: Function/PSL: FO-ALG-HAL-SL-601 Algeria WPS - Slickline Owner: Approved By: Job Revision By: Rev Date: Rev No: Page: Mohamed El Shafei Mohamed Hassan Parampal Singh Madhok 17-Feb-2022 B 1 of 1
Post-Job Truck Service Checklist
Unit No._________11248585 ______ Date:____________24/08/2023___ Location:_____________ONI 501__________ Use the following Inspection Code ( ) OK ( O ) Follow up repairs made ( X ) Adjustments made To be performed within 24 hours after job completion. ( ) Clean unit using detergent and water (or steam) and allow to dry. ( ) Lube reel brake linkage with grease and oil. ( ) Lube levelwind assembly with grease. Use light oil on vertical wire guide rollers. ( ) Lube counter wheel. ( ) Lube hay pulley. ( ) Lube wire (on reels) with environmentally friendly oil. ( ) Lube door and panel hinges with light oil. ( ) Check engine hours to determine if oil and oil filter change is required. ( ) Visually check unit for needed repairs. ( ) Check that hydraulic fluid level is 4 inches from top; fill as needed (FM/D3/AC-4 specified oil or ATF type F fluid only). ( ) Check return and supercharge filter change indicators. ( ) Check that supercharge pressure is 320 psi (+/- 40). ( ) Fill stuffing box hand pump reservoir with ATF type F. Also fill auxiliary well control hand pump reservoir (if equipped). ( ) Fill chemical tanks as required. ( ) Fill injection grease reservoir as required (if equipped). ( ) Check unit lighting, replace burned out bulbs. ( ) Check that all safety equipment is present and functional. COMPLETED BY: (Employee #)_____said zeghidi_______ Signature:_______________________________________ Comments: HORN/ CRANE SWITCH LIMTE/TEMP AND HYDRAULIC GAUGES NOT WORKING ________________________________________________________________________