This document specifies the requirements for procuring and supplying a hydraulic rescue kit for use by the Malaysian fire department. The rescue kit must include a hydraulic power unit, high pressure hose, cylinder ram, and combination tool. The document provides detailed technical specifications for each component, including dimensions, weight limits, pressure ratings, and performance metrics like cutting force. The hydraulic power unit must meet EN standards and have an engine power of at least 2.2kW, while the other tools also require adherence to EN performance standards for rescue equipment.
This document specifies the requirements for procuring and supplying a hydraulic rescue kit for use by the Malaysian fire department. The rescue kit must include a hydraulic power unit, high pressure hose, cylinder ram, and combination tool. The document provides detailed technical specifications for each component, including dimensions, weight limits, pressure ratings, and performance metrics like cutting force. The hydraulic power unit must meet EN standards and have an engine power of at least 2.2kW, while the other tools also require adherence to EN performance standards for rescue equipment.
This document specifies the requirements for procuring and supplying a hydraulic rescue kit for use by the Malaysian fire department. The rescue kit must include a hydraulic power unit, high pressure hose, cylinder ram, and combination tool. The document provides detailed technical specifications for each component, including dimensions, weight limits, pressure ratings, and performance metrics like cutting force. The hydraulic power unit must meet EN standards and have an engine power of at least 2.2kW, while the other tools also require adherence to EN performance standards for rescue equipment.
Tajuk Templat: OPERASI (ABO) HYDRAULIC RESCUE KIT UNTUK KEGUNAAN BOMBA TUDM Jenis Item: Produk Jenis Barangan: Tempatan
UOM Jenis Harga Kuantiti
Item Spesifikasi PEROLEHAN SET Biasa Standard 1 MEMBEKAL 2.0 TECHNICAL AND PERFORMANCE REQUIREMENTS 2.1 The DAN Rescue kit must consist of the following components: - Hydraulic Power MENGHANTAR Unit - High Pressure Hose - Cylinder Ram - Combination tool ALAT BANTUAN OPERASI (ABO) 2.2 Hydraulic Power Unit shall be: - EN 13204 compliant. - Engine power HYDRAULIC supply not less than 2.2kW - 4 Stroke - Petrol. - Nominal working RESCUE KIT pressure not less than 700 bar. - Total hydraulic fluid capacity not more UNTUK than 4 liters. - Effective hydraulic fluid capacity not more than 3.15 liters. - KEGUNAAN EN Class – ATO/MTO. - Weight not more than 29.9 kg. - Operating BOMBA TUDM pressure not less than 630/700 bar. - Flow rate ATO (Low pressure/High pressure shall 5.4/1.4 (liter/min). - Flow rate MTO (Low pressure/High pressure shall 2.7/0.7 (liter/min). - Maximum noise emission not more than 84.3 dB(A). 2.3 High Pressure Hose shall be: - EN 13204 complaint. - Length not less that 15 meter. - Weight not more 7.7kg. - COAX design hose (Hose in hose system). 2.4 Cylinder Ram shall be: - EN 13204 classification R 137/320-11,5. - Nominal pressure not less than 700 bar - Dimension (Length x Width x Height) shall 530mm x 190mm x 79mm. - Weight not more than 11.5kg. - Pulling force not less than 24kN. - Pressing force not less than 137kN. - Starting length not less than 530mm. - End length not less than 850mm. 2.5 Combination tool shall be: - EN 13204 classification CK36/360I-14,2. - EN 13204, cutting class 1I-2K-3J-4K-5J. - NFPA 1936 cutting classification A7-B8-C7-D9-E8-F5. - Nominal pressure not less than 700 bar. - Dimension (Length x Width x Height) shall 765mm x 236mm x 158 mm. - Weight not more than 14.2kg. - Maximum Pulling force not less than 53kN. - Pulling width (with adapter) not less than 440mm. - Opening width not less than 285mm. - Spreading force (In the working area) not less than 36 - 783kN. - Spreading width not less than 360mm.