Professional Documents
Culture Documents
Simple-Inverter-Using-555-Time-Circuit
Working Explanation
The 555 timer IC is used as the key component which is configured as an Astable multivibrator to
provide continuous switching pulses. The transformer has 230V/9V is used inverted to act as a step-up
transformer and is derived by the two transistors TIP41A (NPN) and TIP42A (PNP). The input supply
voltage is 5V to 15V DC and the output achieved is 110V to 230V AC with 50-60 Hz frequency, although it
is not a pure sine wave.
The two transistors provide a pulsating signal to the primary coil of the transformer at one end while the
other end is connected to the switching transistor which is derived by the 50Hz frequency. When the
switch is ON the transformer receives a pulse or else the primary is disconnected from the source. This
switching action provides a discrete DC pulse to the transformer which is circulated in the windings
developing magnetic flux This is due to the electromagnetic induction induced in the secondary windings
and due to the more coils, higher EMF is induced thus the output is stepped up AC.
IC-555-timer-formula
Here, R2 = R2+VR1.
how-inverter-works-1024x684-1
The transformer with the less primary and more secondary windings (step-up) transformer is used in a
reverse polarity such that the primary windings become secondary and the secondary side becomes
primary so it can work as a step-down transformer.
Uses:
Introduction:
The power electronics converts are basically designed to convert the electrical energy from one form
into another, it deals with the semiconducting materials and the energy storing devices. These power
converters play a major role in real-world applications. The power converters are mainly divided into six
types that is AC-DC converters, AC-AC converters, DC-DC converters, DC-AC converters, Diode rectifiers,
and static switches. All these types of power converters occupy different importance according to their
need in different sectors.
The inverters are the type of power converters that convert the DC signal at the input to the AC signal at
their output, the output AC signal achieved is generally equal to the mains supply voltage. We can build
inverters at home using simple electrical components to control low-power appliances.