Professional Documents
Culture Documents
TROUBLESHOOTING
If you struggle with printing plastic parts, here are some troubleshooting tips to help you out.
• Make sure the print surface is clean. If the Windex didn’t work, try to clean the surface with
dish soap water (dish soap water can actually dissolve sugar residue).
• For smooth PEI try to use the bundled glue stick, which increases adhesion for PETG and
creates a separation layer.
• Generate your own G-codes using PrusaSlicer. Select PETG or similar material with at least
20% grid infill. Place only 2-3 objects around the center of the heated bed for each individual
G-code.
• If none of that made any difference, try to start the print and slower the print speed to
70-80%. You can do that by rotating the knob in the counterclockwise direction.
If you have any issues with printing the plastic parts, do not hesitate to contact our support team
through Live chat or e-mail info@prusa3d.com.