Professional Documents
Culture Documents
VP Tensioning-Devices-And-guides 22 BDI VP1266 en
VP Tensioning-Devices-And-guides 22 BDI VP1266 en
com
1
LoadCell Pro HDU Guide
The measuring device LoadCell Pro ensures constant tension The HDU Guide ensures exact directional stability of your
for your fabrics, felts and belts. It is used in the wire, press and clothing and provides optimal wire, felt and fabric run control.
dryer sections of tissue, board and paper machines. The HDU Guide thus guarantees smooth operation of your
paper machine.
SensoTension P
SensoTension P ensures exact and constant felt tensioning HDU control upgrade
in the press section. For best results, felt tension should be The HDU control system upgrade is an optimization of the
measured with the separate LoadCell Pro sensor, which can pneumatic scanning and control systems for numerous makes
also be integrated into the tensioning device if required. of felt and fabric guides in the wire, press and dryer sections.
2
3
1
4
1 Constant tension by LoadCell Pro
2 Specially designed sensor
5
3
6
3 Reliable felt tensioning system with
spindle drive
4 Press tensioning device suitable for
all installation positions
7
5
8
5 Robust, chain-driven system
6 Tensioning device suitable for all
installation positions
In order to ensure that the roll is not crooked, the two chain
Your benefits
drives on the operator side and drive side are coupled
by means of a transverse shaft. In contrast to conventional + Reliable and exact fabric tensioning
partially spindle-driven systems in the dryer section, + Compact load cell design
SensoTension DE is considerably less sensitive to con- + Redundant signal for fabric tension measurement
tamination. + No vibrations
9
7 8
10
7 Pneumatic cylinder with roll weight compensation
8 Manual base adjustment for easy compensation of
rolls that are not exactly aligned within the fabric loop
9 Remote display of regulating operations within the
QCS and comfortable motorized base alignment with
operation from the control room
Area of application
Your benefits
The HDU Guide can be used in the forming, press and dryer
sections and can be attached in the most varied positions + Reliable directional stability of the clothing provides
in the paper machine. Even a vertical or over-head installation for malfunction-free operation
is possible. + Low-maintenance due to a very rugged design and
low-wear motion elements
Fabric edge scanning in the wet and the dryer section + Low operating costs thanks to low air consumption
In the wet section or with low speeds in the dryer section + Pressure springs in the actuating cylinder also allow
• Uno tracer on the side of the controller functioning in case of compressed air failure
• Paddle arranged perpendicularly to the fabric, with + Wear of web edges extremely low, thus longer fabric
freedom of inward and outward motion service life
+ Base alignment can compensate negative running
At high speeds in the dryer section characteristics of the fabric caused by rolls that are
• Duo tracer on operator side and drive side not optimally aligned
• Paddles arranged perpendicularly to the dryer fabric,
paddles
11
10 11
12
10 Edge scanning with manual fabric
positioning
11+12 Reliable pneumatic edge scanning
with low air consumption
12
13
Tender side Drive side
3
1 5
6
Your benefits
One unit will be placed on the tender side and one will be
placed on the drive side. For maximum safety there is a switch + Increased safety
for the alert and a separate switch for the shutdown in each + Decrease in accidents
unit. + Prevention of bigger damages
+ Usable in wet and dry areas
14
HDU Guide
SensoTension P
LoadCell Pro
SensoTension DE 15
new
15
VP 1266, en, BDI, 2022-11. Dimensions and illustrations without obligation. Subject to change.
How can we support you?
Just contact us via our
webform.
Voith Group
St. Poeltener Str. 43
89522 Heidenheim, Germany
Contact:
Phone +49 7321 37-0
paper@voith.com
www.voith.com