Professional Documents
Culture Documents
Bosch Rexroth Valves
Bosch Rexroth Valves
09
Replaces: 07.06
1/14
Type M-.SED
Size 6
Component series 1X
Maximum operating pressure 350 bar [5100 psi]
Maximum flow 25 l/min [6.6 gpm]
H4243
Ordering code
M SED 6 1X 350 C
2 main ports =2
3 main ports =3
4 main ports =4
Seat valve
Size 6 =6
Main ports 2 3 4
A
a b – – = PK
a b
P
A
a b – – = NK
a b
P
A
a b
– – = UK
a b
Symbols
P T
A
a b
– – = CK
a b
P T
A B
a
a b
b – – =D
P T
A B
a
b a
b – – =Y
P T
= Available
Component series 10 to 19 = 1X
(10 to 19: unchanged installation and connection dimensions)
Operating pressure 350 bar [5100 psi] = 350
Solenoid, wet-pin with detachable coil =C
DC voltage 24 V = G24
DC voltage 205 V = G205 1)
DC voltage 96 V = G96
For further ordering codes for other voltages, see page 6
code
K4 *
connection to the AC voltage mains, a DC voltage solenoid must be used, which is controlled via a rectifier (see
1) For
“NK” A “CK” A
a b
a b
a b a b
P P T
5
"a"
1
Type M-3SED 6 CK1X/350CG24N9K4 7 T A P 11
RE 22049/07.09 M-.SED Hydraulics Bosch Rexroth AG 5/14
1
6
"b"
5
4
7 Schematic illustration:
11 Initial position
5 7 4 11
A
3/2 direction-
al seat valve
T P 12
Plus-1
T B P A plate
8 10 9 A T B P
Type M-4SED 6 Y1X/350CG24N9K4 8 10 9
6/14 Bosch Rexroth AG Hydraulics M-.SED RE 22049/07.09
Technical data (For applications outside these parameters, please consult us!)
general
Weight – 2/2 directional seat valve kg [lbs] 1.5 [3.3]
– 3/2 directional seat valve kg [lbs] 1.5 [3.3]
– 4/2 directional seat valve kg [lbs] 2.3 [5.1]
Installation position Any
Ambient temperature range °C [°F] –30 to +50 [–22 to +122] (NBR seals)
–20 to +50 [–4 to +122] (FKM seals)
hydraulic
Maximum operating pressure bar [psi] See performance limit page 8
Maximum flow l/min [gpm] 25 [6.6]
Hydraulic fluid Mineral oil (HL, HLP) according to DIN 51524 1); fast
biodegradable hydraulic fluids according to VDMA
24568 (see also RE 90221); HETG (rape seed oil) 1);
HEPG (polyglycols) 2); HEES (synthetic esters) 2);
other hydraulic fluids upon request
Hydraulic fluid temperature range °C [°F] –30 to +80 [–22 to +176] (NBR seals)
–20 to +80 [–4 to +176] (FKM seals)
Viscosity range mm2/s [SUS] 2.8 to 500 [35 to 2320]
Maximum permitted degree of contamination of the hy- Class 20/18/15 3)
draulic fluid - cleanliness class according to ISO 4406 (c)
electrical
Type of voltage Direct voltage Alternate voltage
Available voltages 4) V 12, 24, 42, 96, 110, Only possible via rectifier
205, 220 (see page 13)
Voltage tolerance (nominal voltage) % ±10
Power consumption W 30
Duty cycle % 100
Switching time ac- – ON ms 40 to 70
cording to ISO 6403 – OFF ms 10 to 20 (without rectifier)
30 to 45 (with rectifier)
Maximum – Operating pressure ≤ 350 bar 1/h 15000
switching frequency – Operating pressure > 350 bar 1/h 3600
Type of protection according to DIN EN 60529 IP 65 with mating connector mounted and locked
Maximum surface temperature of the spool 5) °C [°F] 120 [248]
1) Suitable for NBR and FKM seals When establishing the electrical connection, the protec-
2) Only suitable for FKM seals tive earth conductor (PE ) has to be connected properly.
3) The cleanliness classes specified for the components
must be adhered to in hydraulic systems. Effective filtration
prevents malfunction and at the same time increases the
service life of the components.
For selecting the filters, see data sheets RE 50070,
RE 50076, RE 50081, RE 50086, RE 50087 and RE 50088.
4) Special voltages upon request
5) Dueto the temperatures occurring at the surfaces of the
solenoid coils, the standards ISO 13732-1 and EN 982
need to be adhered to!
RE 22049/07.09 M-.SED Hydraulics Bosch Rexroth AG 7/14
1
����� 24
20
����� �����
16 16
����� �����
1 3
12 12
����� �����
8 8
����� �����
����
4 ���� 4
��� 0 ��� 0
0 4 8 12 16 20 24 25 0 4 8 12 16 20 2425
��� ��� ��� ��� ��� ��� ��� ����� ��� ��� ��� ��� ��� ��� ��� �����
PK D
1 M-2SED 6 …, P to A 1 M-4SED 6 …, A to T
NK Y
UK D
1 M-3SED 6 …, P to A and A to T 2 M-4SED 6 …, P to A
CK Y
D
3 M-4SED 6 …, B to T and P to B
Y
10 300
����� ������
250
����� 8 ������
B18
����� ������ 200
6 ������ B20
����
150
������
���� 4
������ 100
���� B22
2 ������
50
���� �����
��� 0 ���
0 4 8 12 10 20 24 25 0 4 8 12 16 20 24 25
��� ��� ��� ��� ��� ��� ��� ����� ��� ��� ��� ��� ��� ��� ��� �����
Flow in l/min [gpm] → Flow in l/min [gpm] →
8/14 Bosch Rexroth AG Hydraulics M-.SED RE 22049/07.09
a b
2-way circuit
a b
P
A
350 350 25
NK a b
a b [5100] [5100] [6.6]
P
A
a b 350 350 350 25
UK
(3/2 directional
2-way circuit
A
a b 350 350 350 25
UK
3-way circuit
A
a b 350 350 350 25
CK
a b [5100] [5100] [5100] [6.6]
P T
(flow only possible in the
A B
3/2 directional valve (symbol
direction of the arrow!)
A B
3/2 directional valve (symbol
350 350 350 pP – 40 25
Y a
b a
b “CK”) in connection with
[5100] [5100] [5100] [580] [6.6]
P T Plus-1 plate: pP > pA ≥ pB > pT
Attention!
The performance limits were determined when the solenoids were at operating temperature, at 10% undervoltage and without
tank pre-loading.
RE 22049/07.09 M-.SED Hydraulics Bosch Rexroth AG 9/14
Unit dimensions: 2/2 directional seat valve (“PK”) and 3/2 way seat valve (“UK”)
(dimensions in mm [inch])
������
6 3 4 6
������
15
15
max. Ø6 �������
87,2 ������
93 ������
Ø5,3 ������
46 ������
42 ������
Ø10 ������
23 ������
������ 50,5 89,3 ������ (85,8 ������) 59,3 ������
9
62,7 ������
5 1 2.1 2.2 7
13,8 ������
0,01/100
F1
T F2
[0.0004/4.0]
Ø45 �������
44,5 ������
6,4 ������
B Rzmax 4
A
P Required surface quality of the
F4 F3 valve mounting face
8 10
Unit dimensions: 2/2 directional seat valve (“NK”) and 3/2 directional seat valve (“CK”)
(dimensions in mm [inch])
������
6 4 3 6
������
15
15
max. Ø6 �������
93 ������
87,2 ������
Ø5,3 ������
46 ������
Ø10 ������
42 ������
23 ������
9 2.1 2.2 1 5
6,4 ������
62,7 ������
13,8 ������ 7
0,01/100
F1 T F2
[0.0004/4.0]
Ø45 �������
44,5 ������
A Rzmax 4
B
P Required surface quality of the
F4 F3
valve mounting face
8 10
������
������
15
3 6
15
6 4
max. Ø6 �������
93 ������
87,2 ������
Ø5,3 ������
46 ������
42 ������
Ø10 ������
23 ������
1
44,5 ������
7
8,5
������ 50,5 89,3 ������ (85,8 ������) 59,3 ������
������
62,7 ������
5 2.1 2.2 13,8 ������
9
F1
T F2 0,01/100
[0.0004/4.0]
Ø45 �������
44,5 ������
6,4 ������
B Rzmax 4
A
F4
P F3
Required surface quality of the
valve mounting face
8 10
������
3
15
15
6 6
max. Ø6 �������
93 ������
87,2 ������
46-0,5 �����������
Ø5,3 ������
Ø10 ������
42 ������
23 ������
44,5 ������
1
7
9
8,5
������
62,7 ������ 2.1 2.2 5
13,8 ������
0,01/100
F1 T F2
[0.0004/4.0]
Ø45 �������
44,5 ������
6,4 ������
A Rzmax 4
B
P Required surface quality of the
F4 F3 valve mounting face
8 10
2/2 and 3/2 directional seat valve 4/2 directional seat valve
4 hexagon socket head cap screws metric 4 hexagon socket head cap screws metric
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L (separate order) ISO 4762 - M5 x 95 - 10.9-flZn-240h-L (included in scope
(friction coefficient µtotal = 0.09 to 0.14); of delivery)
Tightening torque MA = 7 Nm [5.2 ft-lbs] ±10 %, (friction coefficient µtotal = 0.09 to 0.14);
Material no. R913000064 Tightening torque MA = 7 Nm [5.2 ft-lbs] ±10 %,
or Material no. R913000223
4 hexagon socket head cap screws or
ISO 4762 - M5 x 50 - 10.9 (self procurement) 4 hexagon socket head cap screws
(friction coefficient µtotal = 0.12 to 0.17); ISO 4762 - M5 x 95 - 10.9 (self procurement)
Tightening torque MA = 8.1 Nm [6 ft-lbs] ±10 % (friction coefficient µtotal = 0.12 to 0.17);
Tightening torque MA = 8.1 Nm [6 ft-lbs] ±10 %
4 hexagon socket head cap screws UNC
10-24 UNC x 2” (self procurement) 4 hexagon socket head cap screws UNC
(friction coefficient µtotal = 0.19 to 0.24 according to ASTM-574); 10-24 UNC x 3 3/4” (self procurement)
Tightening torque MA = 11 Nm [8.1 ft-lbs] ±15 %, (friction coefficient µtotal = 0.19 to 0.24 according to ASTM-574);
(friction coefficient µtotal = 0.12 to 0.17 according to ISO 4762); Tightening torque MA = 11 Nm [8.1 ft-lbs] ±15 %,
Tightening torque MA = 8 Nm [5.9 ft-lbs] ±10 %, (friction coefficient µtotal = 0.12 to 0.17 according to ISO 4762);
Material no. R978833365 Tightening torque MA = 8 Nm [5.9 ft-lbs] ±10 %,
Material no. R978881682
Material no.
with indicator light
Valve side
and
Zener diode suppres-
Connec- with indicator light with rectifier sion circuit
tion Color without circuitry 12 … 240 V 12 … 240 V 24 V
a Gray R901017010 – – –
M16 x 1.5 b Black R901017011 – – –
a/b Black – R901017022 R901017025 R901017026
a Red/brown R900004823 – – –
1/2” NPT
b Black R900011039 – – –
(Pg16)
a/b Black – R900057453 R900842566 –
14/14 Bosch Rexroth AG Hydraulics M-.SED RE 22049/07.09
General notes
Seat valves can be used according to the spool symbols as Plus-1 plate:
well as the assigned operating pressures and flows (see per- – When the Plus-1 plate (4/2-directional function) is used, the
formance limits page 8). following lower operating values must be taken into account:
In order to ensure safe functioning, it is absolutely necessary pmin = 8 bar; qV > 3 l/min.
to observe the following points: – The ports P, A, B and T are clearly determined according to
– In order to switch the valve safely or maintain it in its the tasks. They must not be optionally exchanged or closed.
spool position, the pressure situation must be as follows: – With 3- and 4-way spool positions, port T must always be
pP ≥ pA ≥ pT (for design reasons). connected.
– Seat valves have a negative spool overlap, i.e. during the – Pressure level and pressure distribution must be observed!
switching process, leakage oil accrues. This process takes,
– The flow is only permitted in the direction of the arrow!
however, place within such a short time that it is irrelevant
in nearly all applications.
– The specified maximum flow must not be exceeded (use a
throttle insert for limiting the flow, if necessary)!
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain applica-
Fax +49 (0) 93 52 / 18-23 58 tion can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process
of wear and aging.
RE 22049/07.09 M-.SED Hydraulics Bosch Rexroth AG 15/14
Notes
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain applica-
Fax +49 (0) 93 52 / 18-23 58 tion can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process
of wear and aging.
16/14 Bosch Rexroth AG Hydraulics M-.SED RE 22049/07.09
Notes
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain applica-
Fax +49 (0) 93 52 / 18-23 58 tion can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process
of wear and aging.