The document describes two geometry problems involving cutting cones and cylinders with planes. The first problem involves a cylinder with a diameter of 40mm, height of 60mm that is cut 32mm above its base by a plane inclined at 45 degrees. The second problem involves a cone with a base diameter of 75mm, axis length of 80mm that is cut 35mm from its apex by a plane inclined at 45 degrees. The document requests drawing the developments of both shapes.
The document describes two geometry problems involving cutting cones and cylinders with planes. The first problem involves a cylinder with a diameter of 40mm, height of 60mm that is cut 32mm above its base by a plane inclined at 45 degrees. The second problem involves a cone with a base diameter of 75mm, axis length of 80mm that is cut 35mm from its apex by a plane inclined at 45 degrees. The document requests drawing the developments of both shapes.
The document describes two geometry problems involving cutting cones and cylinders with planes. The first problem involves a cylinder with a diameter of 40mm, height of 60mm that is cut 32mm above its base by a plane inclined at 45 degrees. The second problem involves a cone with a base diameter of 75mm, axis length of 80mm that is cut 35mm from its apex by a plane inclined at 45 degrees. The document requests drawing the developments of both shapes.
Problem-01: A cylinder of 40 mm diameter, 60 mm height and having its axis
vertical, is cut by a section plane perpendicular to the V.P., inclined at 45° to
the H.P. and intersecting the axis 32 mm above the base. Draw its development. Problem-02: A Cone base 75 mm diameter and axis 80 mm long is resting on its base on H.P. It is cut by a section plane perpendicular to the V.P., inclined at 45° to the H.P. and cutting the axis at a point 35 mm from the apex. Draw its development.