Professional Documents
Culture Documents
(Format Of Technical
Specification)
TM NODE PELABUHAN
KLANG
B02005
1. Propose to swap existing Enclosure 6150 cabinet to new zte Outdoor ZXDU68 W301
c/w 3 rectifier module.
2. Propose to Swap BBU Huawei to New BBU V9200.
3. Propose to Add VBPc1 & VBPe3p.
4. Propose to Add GPS.
5. Propose to add new 4*bank battery potevio (48v 100ah).
6.6.Propose
Proposetonew
Add 4*125a
R9264Hdc M901821
breakerx3 for+new
R9264M M1821 x2 + R8862A S2601 x5 (Top)
battery.
7.7.
7.Propose
Proposetotonew
Propose Dismantle RRUM901821
Add1*DCPD10B.
R9264H 5301 x3, x3
RRU 5909 x3,M1821
+ R9264M RRU 5862
x2 +x2, RRU 5502
R8862A S2601x2x5,
forDismantle
All SectorCelcom
(Top)
8.
allPropose
RRU&BBU newfor 2*125A dc breaker for new DCPD10B.
all sector.
8.9.
8.Dismantle
Propose Celcom
Propose tonewSwap 3*63ABBU for all sector.
dc breaker for new rru. to ODHI2-32R18J65R16M-GQ-12port- (4.3) for sector
A08260PD00v06-10port-(4.3)
9.10.
Propose to Swap A08260PD00v06-10port-(4.3)
1. Propose to Add R9264H M901821 x3 + R9264M to ODHI2-32R18J65R16M-GQ-12port-
M1821 x2 + (4.3) for sector 1.
10. Propose
R8862A
9. Propose to Reuse
to S2601
Reuse 2xODHI2-32R18J65R16MJ-GQ-16port-(4.3)
x5,Dismantle Celcom all RRU&BBU for allfor
2xODHI2-32R18J65R16MJ-GQ-16port-(4.3) for sector
sector.
sector 2&3 2&3
11.
11. Proposed
Propose
10. Proposed to to make
to Swap
make good of RRU CablingForFor
A08260PD00v06-10port-(4.3)
good of RRU Cabling All All Sector.
to
Sector.ODHI2-32R18J65R16M-GQ-
12. Proposed
12port- to
(4.3)to
11. Proposed Reuse
forReuse Existing
sector 1
ExistingAntenna
Antenna ODI-065R16M17JJJJ-GQ-10port-(4.3)For
ODI-065R16M17JJJJ-GQ-10port-(4.3) ForSector
Sector1,1,2 2&&3 3
12. Propose to Reuse 2xODHI2-32R18J65R16MJ-GQ-16port-(4.3) for sector 2&3
13. Proposed to make good of RRU Cabling For All Sector.
14. Proposed to Reuse Existing Antenna ODI-065R16M17JJJJ-GQ-10port-(4.3) For Sector 1, 2 &
3
Verification on-site By
TM (PO/NMO)
YES NO
Equipment Type ELTEK & ENCLOSURE 6150
Equipment N/A
Weight (kg)
Associated N/A
Equipment
Weight (kg)
Total Weight (kg) N/A
Power N/A
Consumption (W)
Power Supply N/A
Requirement (A)
TX Output Power N/A
Plinth Dimension
Verification on-site By TM
(PO/NMO)
YES NO
Antenna Gain (dBi) 16.0 dBi- 18.5 16.0 dBi- 18.5 16.0 dBi-
dBi dBi 18.5 dBi
N/A
BSS RX
N/A
(MHz) TX
N/A
Microwave RX
N/A
(MHz) TX
7.0 EARTHING
9.0 OTHERS
N/A
Attachment 1.0
Proposed Site Layout
Full View
Surrounding
Existing Outdoor Foundation
Cable Ladder & Routing
Existing ACDB
Existing Rectifier Modules
Sector 1
Proposal RRU