Professional Documents
Culture Documents
Owner’s Manual
CLICK125
CR Section will kindly provide the discussion, answering to all kind of inquiries, and all
customer doubts with our experienced and professional staffs.
The vehicle pictured in this owner’s manual may not match your
actual vehicle.
Welcome
Congratulations on your purchase of a new ● The following codes in this manual
Honda vehicle. Your selection of a Honda indicate the destination.
makes you part of a worldwide family of ● The illustrations here in are based on the
satisfied customers who appreciate Honda's ACB125CBT CA type.
reputation for building quality into every
product. Destination Codes
Code Destination
To ensure your safety and riding pleasure: ACB125CBT
● Read this owner's manual carefully. CA, II CA Cambodia
● Follow all recommendations and
procedures contained in this manual.
● Pay close attention to safety messages
contained in this manual and on the
vehicle.
20221206110820_32K2VD000_eng_BOOK Page 3 Tuesday, December 06 2022 11:12:16 JST
Contents
Vehicle Safety P. 2
Operation Guide P. 12
Maintenance P. 68
Troubleshooting P. 99
Information P. 120
Specifications P. 133
20221206110820_32K2VD000_eng_BOOK Page 5 Tuesday, December 06 2022 11:12:16 JST
Vehicle Safety
This section contains important information for safe riding of your vehicle.
Please read this section carefully.
Safety Guidelines
Vehicle Safety
Follow these guidelines to enhance your safety: and keeping their feet on the footpegs, even
● Perform all routine and regular inspections when the vehicle is stopped.
specified in this manual.
● Stop the engine and keep sparks and flames Take Time to Learn & Practice
away before filling the fuel tank. Even if you have ridden other vehicles, practice
● Do not run the engine in enclosed or partly riding in a safe area to become familiar with
enclosed areas. Carbon monoxide in how this vehicle works and handles, and to
exhaust gases is toxic and can kill you. become accustomed to the vehicle's size and
weight.
Always Wear a Helmet
It's a proven fact: helmets and protective Ride Defensively
apparel significantly reduce the number and Always pay attention to other vehicles around
severity of head and other injuries. So always you, and do not assume that other drivers see
wear an approved helmet and protective you. Be prepared to stop quickly or perform an
apparel. 2 P. 6 evasive maneuver.
Before Riding
Make sure that you are physically fit, mentally
focused, and free of alcohol and drugs. Check
that you and your passenger are both wearing
an approved helmet and protective apparel.
Continued 3
20221206110820_32K2VD000_eng_BOOK Page 7 Tuesday, December 06 2022 11:12:16 JST
Safety Guidelines
by wearing bright reflective clothing, positioning maintained and in safe riding condition.
yourself so other drivers can see you, signaling Inspect your vehicle before every ride and
before turning or changing lanes, and using perform all recommended maintenance. Never
your horn when necessary. exceed load limits (2 P. 11), and do not modify
your vehicle or install accessories that would
Ride within Your Limits make your vehicle unsafe (2 P. 10).
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and If You are Involved in a Crash
inattention can impair your ability to use good Personal safety is your first priority. If you or
judgement and ride safely. anyone else has been injured, take time to
assess the severity of the injuries and whether it
Don't Drink or Use Drugs and Ride is safe to continue riding. Call for emergency
Alcohol or drugs and riding don't mix. Even one assistance if needed. Also follow applicable laws
alcoholic drink can reduce your ability to and regulations if another person or vehicle is
respond to changing conditions, and your involved in the crash.
reaction time gets worse with every additional
drink. The same is true for drug use. Don't drink
or use and ride, and don't let your friends do it
either.
4
20221206110820_32K2VD000_eng_BOOK Page 8 Tuesday, December 06 2022 11:12:16 JST
Safety Guidelines
If you decide to continue riding, first turn the Never run your vehicle inside a garage or other
ignition switch to the (Off) position, and enclosure.
Vehicle Safety
evaluate the condition of your vehicle. Inspect
for fluid leaks, check the tightness of critical nuts
and bolts, and check the handlebar, control 3WARNING
levers, brakes, and wheels. Ride slowly and Running the engine of your vehicle
cautiously. while in an enclosed or even partially
Your vehicle may have suffered damage that is enclosed area can cause a rapid build-
not immediately apparent. Have your vehicle up of toxic carbon monoxide gas.
thoroughly checked at a qualified service facility
as soon as possible.
Breathing this colourless, odorless gas
can quickly cause unconsciousness and
Carbon Monoxide Hazard lead to death.
Exhaust contains poisonous carbon monoxide, a
colourless, odorless gas. Breathing carbon Only run your vehicle's engine when it
monoxide can cause loss of consciousness and is located in a well ventilated area
may lead to death. outdoors.
Safety Precautions
6
20221206110820_32K2VD000_eng_BOOK Page 10 Tuesday, December 06 2022 11:12:16 JST
Riding Precautions
Vehicle Safety
Running-in Period surfaces and braking distances are
longer.
During the first 500 km (300 miles) of running,
● Avoid continuous braking.
follow these guidelines to ensure your vehicle's
u Repeated braking, such as when
future reliability and performance.
descending long, steep slopes can
● Avoid full-throttle starts and rapid
seriously overheat the brakes, reducing
acceleration.
their effectiveness.
● Avoid hard braking.
● For full braking effectiveness, operate both
● Ride conservatively.
the front and rear brakes together.
Brakes
# Combi Brake
Observe the following guidelines: Your vehicle is equipped with a brake system
● Avoid excessively hard braking.
that distributes the braking force between the
u Sudden braking can reduce the vehicle's front and rear brakes.
stability. The distribution of the braking force applied to
u Where possible, reduce speed before the front and rear brakes when operating the
turning; otherwise you risk sliding out. front brake lever only and when operating the
rear brake lever only is different.
For full braking effectiveness, operate both the
front and rear brakes together.
Continued 7
20221206110820_32K2VD000_eng_BOOK Page 11 Tuesday, December 06 2022 11:12:16 JST
Riding Precautions
8
20221206110820_32K2VD000_eng_BOOK Page 12 Tuesday, December 06 2022 11:12:16 JST
Riding Precautions
II CA type
Left handle grip Centre stand 4. Turn the ignition switch to the (Lock)
Vehicle Safety
position (2 P. 28), remove the key and close
the shutter (2 P. 30).
CA type
4. Turn the ignition switch to the (Lock)
position (2 P. 28) and lock the ignition
switch (2 P. 37).
5. Set the anti-theft alarm system. 2 P. 39
9
20221206110820_32K2VD000_eng_BOOK Page 13 Tuesday, December 06 2022 11:12:16 JST
10
20221206110820_32K2VD000_eng_BOOK Page 14 Tuesday, December 06 2022 11:12:16 JST
Loading
Loading 3WARNING
Vehicle Safety
● Carrying extra weight affects your vehicle's Overloading or improper loading can
handling, braking and stability.
cause a crash and you can be seriously
Always ride at a safe speed for the load you
hurt or killed.
are carrying.
● Avoid carrying an excessive load and keep
within specified load limits. Follow all load limits and other loading
Maximum weight capacity / Maximum guidelines in this manual.
luggage weight 2 P. 133
● Tie all luggage securely, evenly balanced,
and close to the centre of the vehicle.
● Do not place objects near the lights or the
muffler.
11
20221206110820_32K2VD000_eng_BOOK Page 15 Tuesday, December 06 2022 11:12:16 JST
12
20221206110820_32K2VD000_eng_BOOK Page 16 Tuesday, December 06 2022 11:12:16 JST
# Braking (P.61) Close the throttle and apply the # Parking (P.8)
front and rear brakes together. Park on a firm level surface.
Operation Guide
Use the stand, lock the
u The brakelight will indicate that
steering.
you have applied the brakes.
# Stopping
If pulling off the road, signal early
enough to show traffic that you are
pulling over, and pull over smoothly.
# Refuelling (P.62)
# Turning Corners
Do your braking
before entering
corners.
13
20221206110820_32K2VD000_eng_BOOK Page 17 Tuesday, December 06 2022 11:12:16 JST
Parts Location
Document bag (P.66)
Tool (P.66)
Operation Guide
Battery (P.83)
Fuse box (P.117)
Engine oil fill cap/dipstick
(P.85)
14
20221206110820_32K2VD000_eng_BOOK Page 18 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
Helmet holder (P.65)
Centre compartment (P.66)
Seat (P.64)
II CA type
Kickstarter (P.58)
15
20221206110820_32K2VD000_eng_BOOK Page 19 Tuesday, December 06 2022 11:12:16 JST
Instruments
Speedometer
Operation Guide
Display Check
When the ignition switch is turned to the (On) position, the display will temporarily show all the
modes and digital segments so you can make sure the liquid crystal display is functioning properly.
If any part of these displays does not come on when it should, have your dealer check for
problems.
16
20221206110820_32K2VD000_eng_BOOK Page 20 Tuesday, December 06 2022 11:12:16 JST
Fuel gauge
Remaining fuel when only 1st (E) segment starts flashing:
approximately 1.2 L (0.32 US gal, 0.26 Imp gal).
Operation Guide
If the fuel gauge indicator flashes in a repeat
pattern or turns off: (P.104)
Continued 17
20221206110820_32K2VD000_eng_BOOK Page 21 Tuesday, December 06 2022 11:12:16 JST
Instruments (Continued)
Odometer [TOTAL]/Tripmeter [TRIP A/B]/Average fuel mileage meter [AVG]/Battery
voltage meter [V]
SELECT button selects the odometer, tripmeter A, tripmeter B, average mileage, and battery
Operation Guide
voltage.
Odometer Tripmeter A Tripmeter B Average fuel Battery voltage
mileage
• Odometer:
Total distance ridden.
• Tripmeter:
Distance ridden since tripmeter was reset.
u To reset tripmeter, press and hold SET button with tripmeter displayed.
When to reset tripmeter A, the average fuel mileage is also reset.
• Average fuel mileage:
The average fuel mileage will be based on tripmeter A.
Average fuel mileage since tripmeter A was reset.
When “ ” is displayed except after the average fuel mileage has been reset, go to your
dealer for service.
• Battery voltage:
Current battery voltage.
18
20221206110820_32K2VD000_eng_BOOK Page 22 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
Reset the indicator for the 1st time.
u When the running distance reaches about every 6,000 km after the 1st time resetting:
Reset the indicator whenever it is turned on.
After changing the engine oil, be sure to reset the indicator.
OIL CHANGE indicator
To reset the indicator, press and hold the SET button while turning the ignition switch to the
(On) position, and keep holding the SET button for more than 3 seconds.
u The indicator does not go off until it is reset.
u If the oil is changed before the oil change indicator comes on, be sure to reset the oil change
indicator after changing the oil. When resetting the indicator during no indication, the
indicator will appear for 2 seconds, then disappear.
Continued 19
20221206110820_32K2VD000_eng_BOOK Page 23 Tuesday, December 06 2022 11:12:16 JST
Instruments (Continued)
Display Setting
Following items can be changed sequentially.
Ordinary display
• Clock setting
Operation Guide
20
20221206110820_32K2VD000_eng_BOOK Page 24 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
button, all the clock digits start flashing.
c Press SET button, the hour digits start
flashing.
d Press SELECT button until the desired hour g Press SET button. The clock is set, and then
is displayed. the display moves to the interval value of
u Press and hold to advance the hour fast. OIL CHANGE indicator.
Continued 21
20221206110820_32K2VD000_eng_BOOK Page 25 Tuesday, December 06 2022 11:12:16 JST
Instruments (Continued)
2. OIL CHANGE indicator setting: c Press SET button. The OIL CHANGE
The distance until the OIL CHANGE indicator indicator is set.
comes on is displayed.
The established setting can also be set by
Operation Guide
22
20221206110820_32K2VD000_eng_BOOK Page 26 Tuesday, December 06 2022 11:12:16 JST
Indicators
If one of these indicators does not come on when it should, have your dealer check for
problems.
High beam indicator
Operation Guide
High coolant temperature indicator
If it comes on while riding: (P.101)
Continued 23
20221206110820_32K2VD000_eng_BOOK Page 27 Tuesday, December 06 2022 11:12:16 JST
Indicators (Continued)
24
20221206110820_32K2VD000_eng_BOOK Page 28 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
25
20221206110820_32K2VD000_eng_BOOK Page 29 Tuesday, December 06 2022 11:12:16 JST
Switches
Idling Stop switch
• (Idling Stop): The Idling Stop
Operation Guide
system is on.
• (Idling): The Idling Stop system is off.
Idling Stop system: (P.51)
Headlight switch
• : Headlight, taillight, position
light and license plate light are on.
Turn signal switch • : Headlight, taillight, position
u Pressing the switch turns the light and license plate light are off.
turn signal off.
Horn button
Start button
Headlight dimmer switch
• : High beam
• : Low beam
26
20221206110820_32K2VD000_eng_BOOK Page 30 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
seat opener switch.
II CA type SEAT
u Key can be removed when in the Operates the seat opener switch.
(Off) or (Lock) position. (Off)
Turns engine off.
CA type
To unlock the ignition switch: (Lock)
Locks steering.
(P.36)
CA type
(On)
Turns electrical system on for
starting/riding.
SEAT
Operates the seat opener switch.
(Off)
SH
PU
Continued 27
20221206110820_32K2VD000_eng_BOOK Page 31 Tuesday, December 06 2022 11:12:16 JST
Switches (Continued)
Steering Lock # Locking
Lock the steering when parking to help II CA type
prevent theft. a Turn the handlebar all the way to the left or right.
Operation Guide
A U-shaped wheel lock or similar device is b Push the key down, and turn the ignition
also recommended. switch to the (Lock) position.
u Jiggle the handlebar if the lock is difficult
a to engage.
c Remove the key.
CA type
a Turn the handlebar all the way to the left or right.
Ignition Ignition
switch key b Push the ignition switch down, and turn it to
the (Lock) position.
CA type II CA type u Jiggle the handlebar if the lock is difficult
Push to engage.
b u To unlock the ignition switch. (P.36)
PU
SH
c Lock the ignition switch.
b Turn Turn
Push
28
20221206110820_32K2VD000_eng_BOOK Page 32 Tuesday, December 06 2022 11:12:16 JST
# Unlocking
II CA type
Insert the key, push it in, and turn the ignition
switch to the (Off) position.
Operation Guide
CA type
Push the ignition switch in, and turn it to the
(Off) position.
u To unlock the ignition switch. (P.36)
Continued 29
20221206110820_32K2VD000_eng_BOOK Page 33 Tuesday, December 06 2022 11:12:16 JST
Switches (Continued)
Shutter The shutter will automatically close when you
II CA type remove the ignition key at the (Lock)
The ignition switch for this vehicle is equipped position.
Also you can close the shutter manually.
Operation Guide
Slot Projection
30
20221206110820_32K2VD000_eng_BOOK Page 34 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
key into a keyhole.
The system runs a two-way authentication
between the vehicle and the Honda SMART
Key to verify if it is the registered Honda
SMART Key.
Continued 31
20221206110820_32K2VD000_eng_BOOK Page 35 Tuesday, December 06 2022 11:12:16 JST
32
20221206110820_32K2VD000_eng_BOOK Page 36 Tuesday, December 06 2022 11:12:16 JST
Operating Range
The operating range varies when the ignition
switch is locked or unlocked.
# When the ignition switch is unlocked:
The system can be operated within the
Operation Guide
shaded area shown in the illustration.
The Honda SMART Key system uses low-
intensity radio waves. Therefore, the
operating range may be wider or narrower,
or the Honda SMART Key system may not
work properly in the following situations:
● When the Honda SMART Key battery is
depleted.
● When there are facilities nearby that
generate strong radio waves or noise,
such as TV towers, power stations, radio
stations, or airports.
● When you carry the Honda SMART Key
with a laptop or wireless communication
device such as a radio or mobile phone.
● When the Honda SMART Key comes into
contact with or is covered by metal
objects.
Continued 33
20221206110820_32K2VD000_eng_BOOK Page 37 Tuesday, December 06 2022 11:12:16 JST
34
20221206110820_32K2VD000_eng_BOOK Page 38 Tuesday, December 06 2022 11:12:16 JST
Anyone in possession of the Honda SMART If the ignition switch is in the (On) position,
Key can perform the following operations if the vehicle can be operated even by a
the Honda SMART Key is within operating person who does not have a verified Honda
Operation Guide
range: SMART Key.
● Starting the engine Whenever you leave your vehicle, lock the
● Unlocking the ignition switch steering and lock the ignition switch.
● Unlocking the seat lock (P.37)
● Unlocking the steering lock Make sure the Honda SMART Key indicator
You should always keep the Honda SMART goes off, all turn signals flash once, and the
Key on your person after you get on and off buzzer rings at this time.
the vehicle or while riding.
Continued 35
20221206110820_32K2VD000_eng_BOOK Page 39 Tuesday, December 06 2022 11:12:16 JST
activated. (P.32)
in a different position, turn the ignition switch to
b To authenticate the Honda SMART Key system,
the original ( (Off) or (Lock)) position.
push the ignition switch.
u When properly authenticated and the ignition
switch is unlocked, the Honda SMART Key Honda Honda
SMART Key SMART Key
indicator comes on. indicator
The buzzer also rings 2 times at this time.
u The buzzer sound can be cancelled.
(P.38)
c Turn the ignition switch to the (On) position
while the Honda SMART Key indicator comes on. Ignition
u If you do not turn the ignition switch to the switch
(On) position within 20 seconds after
pushing in the ignition switch, the Honda
SMART Key indicator will go off, the turn
SH
PU
# To Lock the Ignition Switch When the Honda SMART Key system
a Turn the ignition switch to the SEAT, (Off) does not work properly (P.108)
or (Lock) position.
Ignition
b Lock the ignition switch by doing one of the
Operation Guide
following: switch
● Leave the operating range with the
Honda SMART Key. (P.33) (Lock)
● Push the ignition switch. (On) SH
(Off)
PU
Continued 37
20221206110820_32K2VD000_eng_BOOK Page 41 Tuesday, December 06 2022 11:12:16 JST
38
20221206110820_32K2VD000_eng_BOOK Page 42 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
sensor detects vibration or movement with
the ignition switch in the (Off) or (Lock)
position and the system is set, the alarm is
activated.
Continued 39
20221206110820_32K2VD000_eng_BOOK Page 43 Tuesday, December 06 2022 11:12:16 JST
40
20221206110820_32K2VD000_eng_BOOK Page 44 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
the ignition switch. (P.33) one of the following:
● Press the answer back/alarm button on
When the ignition switch is unlocked, the the Honda SMART Key.
buzzer rings 2 times and the alarm indicator u After stopping the anti-theft alarm
goes off. activation, the anti-theft alarm system
u The buzzer sound can be cancelled. will be reset.
(P.38) ● Unlock the ignition switch. (P.36)
u After stopping the anti-theft alarm
activation, the anti-theft alarm system
will be cancelled.
Answer back/
alarm button
Continued 41
20221206110820_32K2VD000_eng_BOOK Page 45 Tuesday, December 06 2022 11:12:16 JST
42
20221206110820_32K2VD000_eng_BOOK Page 46 Tuesday, December 06 2022 11:12:16 JST
u When the answer back/alarm button or g Press and hold the ignition switch for more
ignition switch is not pressed for 1 than 2 seconds. The sensitivity level is set.
minute, the Honda SMART Key indicator u The Honda SMART Key indicator turns
flashes 3 times, and then the buzzer off, and the buzzer sounds once.
Operation Guide
sounds and the mode is cancelled. u When the answer back/alarm button is
Return to a and do the procedure not pressed for 10 seconds, the Honda
again. SMART Key indicator flashes 3 times, and
u If you press the answer back/alarm then the buzzer sounds, and the
button the wrong number of times sensitivity level is set.
before you repeat the procedure 3
times, then repeat the procedure 3 times
again.
# If the Anti-Theft Alarm System Does
Not Operate Properly
f Press the answer back/alarm button to
If any of the following situations arise, the
select from 3 sensitivity levels.
3 alarm rings: high sensitivity battery ((P.83) ) in the vehicle may be
2 alarm rings: medium sensitivity discharged or there is a system problem.
1 alarm ring: low sensitivity Remove the battery and see your dealer.
The Honda SMART Key indicator comes on
while setting. The alarm does not ring.
The alarm rings but fades out.
The alarm system does not stop.
43
20221206110820_32K2VD000_eng_BOOK Page 47 Tuesday, December 06 2022 11:12:16 JST
44
20221206110820_32K2VD000_eng_BOOK Page 48 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
u The answer back system will not function when a Make sure that the Honda SMART Key
the ignition switch is in the (On) position. system is active. (P.32)
b Push the ignition switch to authenticate the
If the ignition switch is left the (Off) or Honda SMART Key system. (P.36)
(Lock) position for more than 10 days, the c Press and hold the ignition switch for more
answer back system will no longer operate. than 4 seconds.
When the system is active and the vehicle u The Honda SMART Key indicator flashes.
receives a signal from pressing answer back/ Ignition switch
Answer back/
alarm button, the system activation will be
alarm button
extended for 10 days.
To reset the system, unlock the ignition
switch and turn the ignition switch to the
(On) position once. PU
SH
Continued 45
20221206110820_32K2VD000_eng_BOOK Page 49 Tuesday, December 06 2022 11:12:16 JST
46
20221206110820_32K2VD000_eng_BOOK Page 50 Tuesday, December 06 2022 11:12:16 JST
g Press and hold the ignition switch for more # Changing the Answer Back Buzzer
than 2 seconds. The sound volume level is Sound Pattern
set. You can select 3 buzzer sound patterns.
u The Honda SMART Key indicator turns
Operation Guide
a Make sure that the Honda SMART Key
off, and the buzzer sounds once. system is active. (P.32)
u When the answer back/alarm button is b Push the ignition switch to authenticate the
not pressed for 10 seconds, the Honda Honda SMART Key system. (P.36)
SMART Key indicator flashes 3 times, and c Press and hold the ignition switch for more
then the buzzer sounds, and the sound than 4 seconds.
volume level is set. u The Honda SMART Key indicator flashes.
Answer back/ Ignition switch
alarm button
SH
PU
Continued 47
20221206110820_32K2VD000_eng_BOOK Page 51 Tuesday, December 06 2022 11:12:16 JST
48
20221206110820_32K2VD000_eng_BOOK Page 52 Tuesday, December 06 2022 11:12:16 JST
g Press and hold the ignition switch for more # Temporary Silence Mode
than 2 seconds. The sound pattern is set. Temporary silence mode is the immediate
u The Honda SMART Key indicator turns way to turn off the answer back system
off, and the buzzer sounds once.
Operation Guide
buzzer sound.
u When the answer back/alarm button is
not pressed for 10 seconds, the Honda
Enable:
SMART Key indicator flashes 3 times, and
Press and hold the answer back/alarm button
then the buzzer sounds, and the sound
for about 2 seconds, the Honda SMART Key
pattern is set.
LED is changes to red.
Disable:
Re-press and hold the answer back/alarm
button for about 2 seconds, the Honda
SMART Key LED changes to green.
49
20221206110820_32K2VD000_eng_BOOK Page 53 Tuesday, December 06 2022 11:12:16 JST
50
20221206110820_32K2VD000_eng_BOOK Page 54 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
an intersection.
are satisfied with the Idling Stop switch in the
# Switching the Idling Stop System On (Idling Stop) position:
or Off
• start the engine by pressing the start
Switches the Idling Stop system on or off button
using the Idling Stop switch. • warm up the engine enough
• ON: (Idling Stop) • ride the vehicle at speeds over 10 km/h (6
u Idling Stop indicator comes on when the mph)
Idling Stop system becomes ready to stop
the engine while riding. Idling Stop indicator
flashes when the engine is stopped by the
Idling Stop system.
• OFF: (Idling)
u Idling Stop indicator does not come on
when the Idling Stop system is off.
Continued 51
20221206110820_32K2VD000_eng_BOOK Page 55 Tuesday, December 06 2022 11:12:16 JST
52
20221206110820_32K2VD000_eng_BOOK Page 56 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
NOTICE
u If it is not flashing, you can't restart the
Stopping by the Idling Stop system for a long time may cause engine with the Idling Stop system, even if
battery discharge. you open the throttle.
u While the engine is stopped by the Idling
Idling Stop indicator Stop system, if you operate the side stand,
the flashing Idling Stop indicator turns off or
stops flashing and stays on, then the engine
will not restart even when you open the
throttle.
Continued 53
20221206110820_32K2VD000_eng_BOOK Page 57 Tuesday, December 06 2022 11:12:16 JST
engine.
When the battery is weak, switch the Idling Stop
switch to (Idling) and do not to use the Idling
Stop system. See your dealer to check the
battery.
54
20221206110820_32K2VD000_eng_BOOK Page 58 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
engine again to recover battery voltage.
This vehicle is equipped with a side stand • Extended fast idling and revving the engine can
ignition cut-off system. damage the engine and the exhaust system.
u If the side stand is down, the engine cannot • If the vehicle is over-turned, you must first turn
the ignition switch to the (Off) position and
be started.
then inspect the vehicle carefully.
u If you lower the side stand with the engine II CA type
running, it will automatically shut off. • Do not operate the kickstarter while the engine
CA type is running as engine damage could result. Do
This vehicle is equipped with a Honda not apply excessive force on the kickstarter.
• Fold up the kickstarter after the kickstarter is
SMART Key system. Always keep Honda returned to the pedal stop.
SMART Key on you when you ride the
vehicle. (P.33) Consult your dealer for advice if you plan to
ride your vehicle at an altitude above
2,500 m (8,000 feet).
Continued 55
20221206110820_32K2VD000_eng_BOOK Page 59 Tuesday, December 06 2022 11:12:16 JST
56
20221206110820_32K2VD000_eng_BOOK Page 60 Tuesday, December 06 2022 11:12:16 JST
c Lock the rear wheel by squeezing the rear To Start the Engine with Electric Starter
brake lever and setting the brake lock lever. d With the throttle completely closed, press
u The starter motor will only work when the start button.
the rear brake lever is squeezed and the Release the start button as soon as the
Operation Guide
side stand is up. engine starts.
Continued 57
20221206110820_32K2VD000_eng_BOOK Page 61 Tuesday, December 06 2022 11:12:16 JST
58
20221206110820_32K2VD000_eng_BOOK Page 62 Tuesday, December 06 2022 11:12:16 JST
If you cannot start the engine: If the engine does not start:
Open the throttle slightly (about 3 mm, a Open the throttle fully and press the start
without freeplay). button for 5 seconds.
b Follow the normal starting procedure.
Operation Guide
About 3 mm, without freeplay
c If the engine starts with unstable idle, open
the throttle slightly.
d If the engine does not start, wait for 10
seconds, then follow steps a - c again.
59
20221206110820_32K2VD000_eng_BOOK Page 63 Tuesday, December 06 2022 11:12:16 JST
Riding
Starting the Vehicle d Acceleration and deceleration
a Push the vehicle forward off the centre To accelerate: Open the throttle slowly.
stand. To decelerate: Close the throttle.
u Lock the rear brake lock.
Operation Guide
60
20221206110820_32K2VD000_eng_BOOK Page 64 Tuesday, December 06 2022 11:12:16 JST
Braking
Close the throttle and apply the front and
rear brake levers together.
Operation Guide
Do not apply the brake lock while riding.
It may cause the wheel to lock, reducing
control of the vehicle.
61
20221206110820_32K2VD000_eng_BOOK Page 65 Tuesday, December 06 2022 11:12:16 JST
Refuelling
Fuel type: Unleaded petrol only
Fuel octane number: Your vehicle is Fuel fill cap Arrow marks
designed to use Research Octane Number
Operation Guide
62
20221206110820_32K2VD000_eng_BOOK Page 66 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
fuel fill cap and fuel tank are aligned.
b Close the seat.
3WARNING
Petrol is highly flammable and
explosive. You can be burned or
seriously injured when handling fuel.
63
20221206110820_32K2VD000_eng_BOOK Page 67 Tuesday, December 06 2022 11:12:16 JST
Storage Equipment
Seat Seat Open
a Turn the handlebar pointed straight ahead.
Seat opener b Insert the ignition key and turn it to the
position of SEAT.
Operation Guide
switch
c Push the SEAT of the seat opener switch.
d Open the seat.
Seat Close
CA type II CA type Close and push down on the rear of the seat
Seat
Ignition opener until locks. Make sure that the seat is locked
SEAT
switch switch securely to pull it up lightly.
Take care not to lock your key in the
compartment under the seat.
SH
PU
SEAT Ignition
SEAT side key SEAT side
64
20221206110820_32K2VD000_eng_BOOK Page 68 Tuesday, December 06 2022 11:12:16 JST
Helmet Holder
3WARNING
The helmet holders are located under the
Riding with a helmet attached to the
seat.
holder can interfere with your ability to
Operation Guide
u Use the helmet holders only when parked.
safely operate the vehicle and could
lead to a crash in which you can be
Helmet holders seriously hurt or killed.
Continued 65
20221206110820_32K2VD000_eng_BOOK Page 69 Tuesday, December 06 2022 11:12:16 JST
66
20221206110820_32K2VD000_eng_BOOK Page 70 Tuesday, December 06 2022 11:12:16 JST
Operation Guide
that would hang out from the vehicle and/or
interfere with the movement of your feet.
Inner Racks
67
20221206110820_32K2VD000_eng_BOOK Page 71 Tuesday, December 06 2022 11:12:16 JST
Maintenance
Importance of Maintenance
Maintenance
pollution. Maintenance is the owner's maintenance. Only you can decide whether or
responsibility. Be sure to inspect your vehicle not you should perform a given task.
before each ride and perform the periodic
checks specified in the Maintenance Schedule. Follow these guidelines when performing
2 P. 70 maintenance.
● II CA type
Stop the engine and remove the key.
3WARNING ● CA type
Improperly maintaining your vehicle or Stop the engine and turn the ignition switch
failing to correct a problem before you to the (Off) position.
● Place your vehicle on a firm, level surface
ride can cause a crash in which you can using the side stand, centre stand or a
be seriously hurt or killed. maintenance stand to provide support.
● Allow the engine, muffler, brakes, and other
Always follow the inspection and high-temperature parts to cool before
servicing as you can get burned.
maintenance recommendations and
● Run the engine only when instructed, and
schedules in this owner's manual. do so in a well-ventilated area.
69
20221206110820_32K2VD000_eng_BOOK Page 73 Tuesday, December 06 2022 11:12:16 JST
Maintenance Schedule
The maintenance schedule specifies the All scheduled maintenance is considered a
maintenance requirements necessary to ensure normal owner operating cost and will be
safe, dependable performance, and proper charged to you by your dealer. Retain all
emission control. receipts. If you sell the vehicle, these receipts
should be transferred with the vehicle to the
Maintenance work should be performed in new owner.
Maintenance
70
20221206110820_32K2VD000_eng_BOOK Page 74 Tuesday, December 06 2022 11:12:16 JST
Maintenance Schedule
Frequency *1
Pre-ride Annual Regular Refer to
Items Check × 1,000 km 1 6 12 18 24 30 36
Check Replace page
2 P. 73
× 1,000 mi 0.6 4 8 12 16 20 24
Fuel Line –
Fuel Level –
Throttle Operation 96
Maintenance
Air Cleaner *2 –
Crankcase Breather *3 –
Spark Plug –
Valve Clearance –
Engine Oil 85
Engine Oil Strainer –
Screen
Engine Idle Speed –
Radiator Coolant *4 3 Years 87
Cooling System –
Drive Belt –
Final Drive Oil *4 2 Years –
Continued 71
20221206110820_32K2VD000_eng_BOOK Page 75 Tuesday, December 06 2022 11:12:16 JST
Maintenance Schedule
Frequency *1
Pre-ride Annual Regular Refer to
Items Check × 1,000 km 1 6 12 18 24 30 36
Check Replace page
2 P. 73
× 1,000 mi 0.6 4 8 12 16 20 24
Battery 74
Brake Fluid *4 2 Years 89
Brake Shoes/Pads Wear 90, 94
Maintenance
Brake System 73
Brake Lock Operation –
Headlight Aim –
Lights/Horn –
Clutch Shoes Wear –
Side Stand 95
Suspension –
Nuts, Bolts, Fasteners –
Wheels/Tyres 79
Steering Head Bearings –
Notes:
*1: At higher odometer reading, repeat at the frequency interval established here.
*2 : Service more frequently when riding in unusually wet or dusty areas.
*3 : Service more frequently when riding in rain or at full throttle.
*4 : Replacement requires mechanical skill.
72
20221206110820_32K2VD000_eng_BOOK Page 76 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Maintenance
because having a breakdown, or even a flat
indicators and horn function properly
tyre, can be a major inconvenience.
● Side stand ignition cut-off system - Check
for proper function 2 P. 95
Check the following items before you get on
● Wheels and tyres - Check condition, air
your vehicle:
pressure and adjust if necessary 2 P. 79
● Fuel level - Fill fuel tank when necessary
2 P. 62
● Throttle - Check for smooth opening and
full closing in all steering positions 2 P. 96
● Engine oil level - Add engine oil if necessary.
Check for leaks 2 P. 85
● Coolant level - Add coolant if required.
Check for leaks 2 P. 87
73
20221206110820_32K2VD000_eng_BOOK Page 77 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
corroded.
Installing non-Honda parts may make Do not remove the battery cap seals. There is
your vehicle unsafe and cause a crash in no need to remove the cap when charging.
which you can be seriously hurt or NOTICE
killed. Your battery is a maintenance-free type and can
be permanently damaged if the cap strip is
Always use Honda Genuine Parts or removed.
equivalents that have been designed
This symbol on the battery means
and approved for your vehicle. that this product must not be treated
as household waste.
NOTICE
An improperly disposed of battery can be
harmful to the environment and human health.
Always confirm local regulations for proper
battery disposal instruction.
74
20221206110820_32K2VD000_eng_BOOK Page 78 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Maintenance
under pressure can damage your eyes. to explode with enough force to kill or
● Electrolyte splashes onto your skin: seriously hurt you.
u Remove affected clothing and wash your
skin thoroughly using water.
Wear protective clothing and a face
● Electrolyte splashes into your mouth:
shield, or have a skilled mechanic do
u Rinse mouth thoroughly with water, and
do not swallow. the battery servicing.
Continued 75
20221206110820_32K2VD000_eng_BOOK Page 79 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Blown fuse
The battery has a limited life span. Consult your
dealer about when you should replace the
battery. Always replace the battery with another
maintenance-free battery of the same type.
NOTICE
NOTICE
Installing non-Honda electrical accessories can
overload the electrical system, discharging the Replacing a fuse with one that has a higher
battery and possibly damaging the system. rating greatly increases the chance of damage to
the electrical system.
76
20221206110820_32K2VD000_eng_BOOK Page 80 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Maintenance
deteriorates according to riding conditions and
time elapsed.
Check the engine oil level regularly, and add the
MB Oil classification
77
20221206110820_32K2VD000_eng_BOOK Page 81 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
78
20221206110820_32K2VD000_eng_BOOK Page 82 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Maintenance
tyres look low. Always check air pressure when foreign objects
your tyres are cold. embedded in the side
of the tyre or the tread.
Also inspect for any unusual bumps or bulges in
the side walls of the tyres.
# Inspecting for Abnormal Wear
Inspect the tyres for
signs of abnormal wear
on the contact surface.
Continued 79
20221206110820_32K2VD000_eng_BOOK Page 83 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
or TWI
Follow all instructions in this owner's
manual regarding tyre inflation and
Wear indicator maintenance.
location mark
80
20221206110820_32K2VD000_eng_BOOK Page 84 Tuesday, December 06 2022 11:12:16 JST
Maintenance Fundamentals
Maintenance
equivalents of the same size, construction,
speed rating, and load range. Always use the size and type of tyres
● Do not install a tube inside a tubeless tyre recommended in this owner's manual.
on this vehicle. Excessive heat build-up can
cause the tube to burst.
● Use only tubeless tyres on this vehicle.
The rims are designed for tubeless tyres,
and during hard acceleration or braking, a
tube-type tyre could slip on the rim and
cause the tyre to rapidly deflate.
81
20221206110820_32K2VD000_eng_BOOK Page 85 Tuesday, December 06 2022 11:12:16 JST
Tools
The tools are in reverse side of the seat. 2 P. 66
● Standard/Phillips screwdriver
● Screwdriver handle
● Spark plug wrench
82
20221206110820_32K2VD000_eng_BOOK Page 86 Tuesday, December 06 2022 11:12:16 JST
Maintenance
Service
coupler Battery
Battery
cover # Removal
Make sure the ignition switch is in the
(Off) position.
1. Remove the battery lid from step floor by
removing the screw.
2. Remove the service coupler from battery
cover by pull it up.
Continued 83
20221206110820_32K2VD000_eng_BOOK Page 87 Tuesday, December 06 2022 11:12:16 JST
6. Remove the battery, taking care not to Make sure the clock information is correct
drop the terminal nuts. after the battery is reconnected. 2 P. 21
The anti-theft alarm system will be
deactivated if the battery is disconnected.
The system will remain off when the battery is
reconnected.
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 74
“Battery Goes Dead.” 2 P. 116
84
20221206110820_32K2VD000_eng_BOOK Page 88 Tuesday, December 06 2022 11:12:16 JST
Engine Oil
Maintenance
to 5 minutes.
2. Turn the ignition switch to the (Off) Lower
position and wait for 2 to 3 minutes. level
3. Place your vehicle on its centre stand on a
firm, level surface.
4. Remove the oil fill cap/dipstick and wipe it
clean.
5. Insert the oil fill cap/dipstick until it seats,
but don't screw it in.
6. Check that the oil level is between the
upper level and lower level marks on the
oil fill cap/dipstick.
7. Securely install the oil fill cap/dipstick.
85
20221206110820_32K2VD000_eng_BOOK Page 89 Tuesday, December 06 2022 11:12:16 JST
1. Remove the oil fill cap/dipstick. Add the guidelines, see “Maintenance Fundamentals.”
recommended oil until it reaches the 2 P. 77
upper level mark.
u Place your vehicle on its centre stand
on a firm, level surface when checking
the oil level.
u Do not overfill above the upper level
mark.
u Make sure no foreign objects enter the
oil filler opening.
u Wipe up any spills immediately.
2. Securely reinstall the oil fill cap/dipstick.
86
20221206110820_32K2VD000_eng_BOOK Page 90 Tuesday, December 06 2022 11:12:16 JST
Coolant
Maintenance
2. Hold your vehicle in an upright position.
3. Check that the coolant level is between If the coolant level is below the LOWER level
the UPPER level and LOWER level marks mark, add the recommended coolant
on the reserve tank. (2 P. 78) until the level reaches the UPPER
Reserve tank cap level mark.
UPPER level
mark Add fluid only from the reserve tank cap and
do not remove the radiator cap.
1. Remove the reserve tank cover by
removing the screw.
2. Remove the reserve tank cap and add
fluid while monitoring the coolant level.
u Do not overfill above the UPPER level
LOWER level
mark.
mark
Reserve tank Screw u Make sure no foreign objects enter the
cover reserve tank opening.
Continued 87
20221206110820_32K2VD000_eng_BOOK Page 91 Tuesday, December 06 2022 11:12:16 JST
3WARNING
Maintenance
88
20221206110820_32K2VD000_eng_BOOK Page 92 Tuesday, December 06 2022 11:12:16 JST
Brakes
Maintenance
horizontal and that the fluid level is above
the LWR level mark. LWR mark
If the brake fluid reservoir is below the LWR
level mark or if the brake lever freeplay
becomes excessive, inspect the brake pads
for wear.
If the brake pads are not worn, you most
likely have a leak. Have your vehicle
inspected by your dealer.
89
20221206110820_32K2VD000_eng_BOOK Page 93 Tuesday, December 06 2022 11:12:16 JST
90
20221206110820_32K2VD000_eng_BOOK Page 94 Tuesday, December 06 2022 11:12:16 JST
Inspecting the Rear Brake Lever Check the brake cable for kinks or signs of
wear. If necessary, have it replaced by your
Freeplay dealer.
Lubricate the brake cable with a
1. Place the vehicle on its centre stand.
commercially available cable lubricant to
2. Measure the distance the rear brake lever
Maintenance
prevent premature wear and corrosion.
moves before the brake takes hold.
Make sure the brake arm, spring and fastener
Freeplay at the tip of the brake lever: are in good condition.
10 - 20 mm (0.4 - 0.8 in)
Freeplay
91
20221206110820_32K2VD000_eng_BOOK Page 95 Tuesday, December 06 2022 11:12:16 JST
Adjusting the Rear Brake Lever 1. Adjust by turning the rear brake adjusting
nut a half-turn at a time.
Freeplay
Adjust the freeplay of the brake lever with the Brake arm pin
front wheel pointed straight ahead.
Maintenance
92
20221206110820_32K2VD000_eng_BOOK Page 96 Tuesday, December 06 2022 11:12:16 JST
Maintenance
Push
93
20221206110820_32K2VD000_eng_BOOK Page 97 Tuesday, December 06 2022 11:12:16 JST
Inspecting the Rear Brake Shoe When the brake is applied, an arrow attached
to the brake arm moves toward a reference
Wear mark on the brake panel. If the arrow aligns
with the reference mark on full application of
The rear brake is equipped with a brake wear
the brake, the brake shoes must be replaced.
indicator.
Maintenance
Reference
mark
94
20221206110820_32K2VD000_eng_BOOK Page 98 Tuesday, December 06 2022 11:12:16 JST
Side Stand
Checking the Side Stand 3. Check the spring for damage or loss of
tension.
Side stand spring 4. Sit on the vehicle and raise the side stand.
5. Start the engine.
6. Lower the side stand all the way. The
Maintenance
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your vehicle inspected by your dealer.
95
20221206110820_32K2VD000_eng_BOOK Page 99 Tuesday, December 06 2022 11:12:16 JST
Throttle
Freeplay
Flange
96
20221206110820_32K2VD000_eng_BOOK Page 100 Tuesday, December 06 2022 11:12:16 JST
Other Replacement
Maintenance
the Honda SMART Key.
times when the ignition switch is turned to
u Do not touch the circuit or terminal.
the (On) position, or the operating range
This may cause problems.
becomes unstable, replace the battery as
u Be careful to avoid scratching the
soon as possible.
waterproof covering or allowing dust
to enter.
We recommend to see your dealer for this
u Do not forcibly dismantle the Honda
service.
SMART Key body.
Battery type: CR2032
Continued 97
20221206110820_32K2VD000_eng_BOOK Page 101 Tuesday, December 06 2022 11:12:16 JST
CAUTION
Slit • Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
Lower case equivalent type.
• Do not exposed to excessive heat such as
2. Replace the old battery with a new sunshine, fire or the like, that can result in an
explosion or the leakage of flammable liquid
battery with the negative - side facing
or gas during use, storage or transportation.
up. • Do not dispose of a battery into fire or a hot
3. Snap the two halves of the case back oven, or give mechanically crushing or cutting
together. of a battery, that can result in an explosion.
u Make sure that upper and lower cases • Do not subjected to extremely low air pressure
are set in the right position. at high altitude that may result in an explosion
or the leakage of flammable liquid or gas.
98
20221206110820_32K2VD000_eng_BOOK Page 102 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
Engine Will Not Start...................................... P. 100 Engine Does Not Start Even If the Throttle is
Overheating (High coolant temperature Opened ............................................................. P. 107
indicator is on) ............................................... P. 101 When the Honda SMART Key System Does Not
Warning Indicators On or Flashing............. P. 102 Operate Properly........................................... P. 108
PGM-FI (Programmed Fuel Injection) Unlock the Seat in an Emergency ............... P. 110
Malfunction Indicator Lamp (MIL)............... P. 102 Unlock the Ignition Switch in an
Battery Charging Condition indicator .......... P. 102 Emergency ...................................................... P. 112
Honda SMART Key Indicator.......................... P. 103 Tyre Puncture ................................................... P. 115
Other Warning Indications ........................... P. 104 Electrical Trouble............................................. P. 116
Fuel Gauge Failure Indication......................... P. 104 Battery Goes Dead............................................ P. 116
When the Idling Stop System Does Not Burned-out Light Bulb ..................................... P. 116
Operate Properly........................................... P. 105 Blown Fuse.......................................................... P. 117
Idling Stop Indicator Does Not Come On .. P. 105 Unstable Engine Operation Occurs
Engine is Not Stopped by the Idling Stop System Intermittently ................................................. P. 119
While the Idling Stop Indicator is On......... P. 106
20221206110820_32K2VD000_eng_BOOK Page 103 Tuesday, December 06 2022 11:12:16 JST
● Check that there is petrol in the fuel tank. ● Check for a blown fuse. 2 P. 117
● Check if the PGM-FI malfunction indicator ● Check for a loose battery connection
lamp (MIL) is on. (2 P. 83) or battery terminal corrosion
u If the indicator lamp is on, contact (2 P. 74).
your dealer as soon as possible. ● Check the condition of the battery.
2 P. 116
If the problem continues, have your vehicle
inspected by your dealer.
100
20221206110820_32K2VD000_eng_BOOK Page 104 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
procedure. Do not start the engine. Transport your
Extended fast idling may cause the high vehicle to your dealer.
coolant temperature indicator to come on. 4. Check the coolant level in the reserve
NOTICE tank. 2 P. 87
Continuing to ride with an overheated engine u Add coolant as necessary.
can cause serious damage to the engine. 5. If 1-4 check normal, you may continue
riding, but closely monitor the high
coolant temperature indicator.
101
20221206110820_32K2VD000_eng_BOOK Page 105 Tuesday, December 06 2022 11:12:16 JST
system. Reduce speed and have your vehicle your vehicle inspected by your dealer.
inspected by your dealer as soon as possible. u If the battery does not have enough
voltage to power the indicator system, the
indicator may not come on.
102
20221206110820_32K2VD000_eng_BOOK Page 106 Tuesday, December 06 2022 11:12:16 JST
Honda SMART Key Indicator However, this does not affect the operation
of your vehicle until stop the engine except
CA type the idling stop.
Replacing the Honda SMART Key
Battery 2 P. 97 If you turn the ignition switch to the SEAT,
(Off) or (Lock) position while the Honda
# When the Honda SMART Key SMART Key indicator is flashing, the Honda
indicator is flashing while the
Troubleshooting
SMART Key indicator will flash faster for
ignition switch is in the (On) about 20 seconds, automatically go off, and
position then the ignition switch will lock.
The Honda SMART Key indicator flashes u Turn signals blink at the beginning and
when communication between your vehicle end of this function.
and Honda SMART Key stops after turning The buzzer also rings at this time.
the ignition switch to the (On) position.
It is probably caused by the following: To stop this flashing and ringing, press and
● Strong radio waves or noise are affecting hold the ignition switch for more than 2
the system seconds. After the flashing and ringing stop,
● You lose the Honda SMART Key while the ignition switch is locked.
riding
If you do not have the Honda SMART Key,
the ignition switch can be unlocked in
another way. 2 P. 112
103
20221206110820_32K2VD000_eng_BOOK Page 107 Tuesday, December 06 2022 11:12:16 JST
104
20221206110820_32K2VD000_eng_BOOK Page 108 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
If the Idling Stop switch is at (Idling):
If PGM-FI malfunction indicator lamp (MIL)
Press the Idling Stop switch to (Idling). lights:
When the PGM-FI malfunction indicator lamp
If you started the engine with the kickstarter: (MIL) lights, the Idling Stop system does not
II CA type operate for protection of the engine. See
your dealer.
If you started the engine with the kickstarter,
the Idling Stop system may not operate.
Restart the engine with the start button, If the battery voltage is low:
referring to the starting procedure (2 P. 55) Ride the vehicle awhile, then stop the engine
for standard engine starting. and then restart the engine with start button,
referring to the starting procedure (2 P. 55) for
standard engine starting. The Idling Stop system
If the engine is cold:
may not operate if the battery voltage is low. If
Warm up the engine.
this occurs frequently, contact your dealer.
The Idling Stop system does not operate
when the engine is cold.
105
20221206110820_32K2VD000_eng_BOOK Page 109 Tuesday, December 06 2022 11:12:16 JST
When the Idling Stop System Does Not Operate Properly u Engine is Not Stopped by the Idling Stop System While the Idling Stop Indicator is On
106
20221206110820_32K2VD000_eng_BOOK Page 110 Tuesday, December 06 2022 11:12:16 JST
When the Idling Stop System Does Not Operate Properly u Engine Does Not Start Even If the Throttle is Opened
Engine Does Not Start Even If If the Idling Stop switch is at (Idling):
While the engine is stopping by the Idling
the Throttle is Opened Stop system, if you press the Idling Stop
switch to (Idling), the Idling Stop system
Engine does not start even if the throttle is
will be cancelled. Restart the engine with start
opened, perform the followings.
button referring to the starting procedure
(2 P. 55) for standard engine starting.
Troubleshooting
If the side stand is down:
While the engine is stopped by the Idling
If the Idling Stop indicator flashes (the Idling
Stop system, if you operate the side stand,
Stop switch is at (Idling Stop) position),
the flashing Idling Stop indicator turns off or
but engine does not start even if the throttle
stops flashing and stays on, and the Idling
is opened, perform the followings.
Stop system is cancelled. Restart the engine
with start button referring to the starting
procedure (2 P. 55) for standard engine Low (or dead) battery or battery lead is loose:
starting. Check the battery and battery terminals. If
the battery is weak, contact your dealer.
107
20221206110820_32K2VD000_eng_BOOK Page 111 Tuesday, December 06 2022 11:12:16 JST
When the Honda SMART Key System Does Not Operate Properly
CA type ● Check that there is no communication
When the Honda SMART Key system does failure in the Honda SMART Key system.
not work properly, perform the following. The Honda SMART Key system uses low-
● Check that the Honda SMART Key system intensity radio waves. The Honda SMART
is activated. Key system may not work properly in the
Lightly push the ON/OFF button on the following conditions:
Honda SMART Key. u When there are facilities nearby that
Troubleshooting
If the Honda SMART Key LED is red, generate strong radio waves or noise
activate the Honda SMART Key system. such as TV towers, power stations,
2 P. 32 radio stations, or airports.
If the Honda SMART Key LED does not u When you carry the Honda SMART
respond, replace the battery. 2 P. 97 Key with a laptop or wireless
communication device such as a radio
or mobile phone.
u When the Honda SMART Key comes
into contact with or is covered by
metal objects.
108
20221206110820_32K2VD000_eng_BOOK Page 112 Tuesday, December 06 2022 11:12:16 JST
When the Honda SMART Key System Does Not Operate Properly
● Check that a registered Honda SMART ● Check the battery condition and battery
Key is used. lead in your vehicle.
Use a registered Honda SMART Key. Check the battery and battery terminals. If
The Honda SMART Key system cannot be the battery is weak, contact your dealer.
activated without a registered Honda
SMART Key. If the Honda SMART Key system cannot be
activated due to other causes, contact your
Troubleshooting
● Make sure that you do not use a broken dealer.
Honda SMART Key.
If you use a broken Honda SMART Key,
the Honda SMART Key system cannot be
activated. Bring the emergency key and
ID tag to your dealer.
109
20221206110820_32K2VD000_eng_BOOK Page 113 Tuesday, December 06 2022 11:12:16 JST
Front lid
Emergency key
Close
Open
Slot Projection
2. Align the projection of the emergency key
with the slot of the emergency seat
opener, and turn the emergency key
counterclockwise.
110
20221206110820_32K2VD000_eng_BOOK Page 114 Tuesday, December 06 2022 11:12:16 JST
# Close
1. Close and push down on the rear of the
seat until it locks. Make sure that the seat
is locked securely by pulling it up lightly. If
the seat is not locked, turn the emergency
key clockwise to lock the seat catch.
Troubleshooting
2. Install the front lid. Make sure that all tabs
are installed securely in position.
Front lid
111
20221206110820_32K2VD000_eng_BOOK Page 115 Tuesday, December 06 2022 11:12:16 JST
112
20221206110820_32K2VD000_eng_BOOK Page 116 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
To input “0” Ignition switch To lock the ignition switch, turn the ignition
switch to the SEAT, (Off), or (Lock)
position, and press and hold the ignition
switch for 2 seconds. The ignition switch also
locks automatically when the ignition switch
SH
PU
114
20221206110820_32K2VD000_eng_BOOK Page 118 Tuesday, December 06 2022 11:12:16 JST
Tyre Puncture
Repairing a puncture or removing a wheel
3WARNING
requires special tools and technical expertise.
Riding your vehicle with a temporary
We recommend you have this type of service
tyre repair can be risky. If the temporary
performed by your dealer.
repair fails, you can crash and be
After an emergency repair, always have the
seriously injured or killed.
tyre inspected/replaced by your dealer.
Troubleshooting
Emergency Repair Using a Tyre If you must ride with a temporary tyre
repair, ride slowly and carefully and do
Repair Kit not exceed 50 km/h (30 mph) until the
If your tyre has a minor puncture, you can tyre is replaced.
make an emergency repair using a tubeless
tyre repair kit.
Follow the instructions provided with the
emergency tyre repair kit.
Riding your vehicle with a temporary tyre
repair is very risky. Do not exceed 50 km/h
(30 mph). Have the tyre replaced by your
dealer as soon as possible.
115
20221206110820_32K2VD000_eng_BOOK Page 119 Tuesday, December 06 2022 11:12:16 JST
Electrical Trouble
116
20221206110820_32K2VD000_eng_BOOK Page 120 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
u Spare fuses are provided on back side
Spare fuses of the battery cover.
3. Install the battery lid and the battery
cover.
Fuse puller
NOTICE
If a fuse fails repeatedly, you likely have an
electrical problem. Have your vehicle inspected
Main fuse
by your dealer.
Continued 117
20221206110820_32K2VD000_eng_BOOK Page 121 Tuesday, December 06 2022 11:12:16 JST
118
20221206110820_32K2VD000_eng_BOOK Page 122 Tuesday, December 06 2022 11:12:16 JST
Troubleshooting
inspected by your dealer as soon as possible.
119
20221206110820_32K2VD000_eng_BOOK Page 123 Tuesday, December 06 2022 11:12:16 JST
Information
Keys..................................................................... P. 121
Instruments, Controls, & Other Features... P. 124
Caring for Your Vehicle.................................. P. 125
Storing Your Vehicle....................................... P. 128
Transporting Your Vehicle ............................ P. 128
You & the Environment ................................. P. 129
Serial Numbers ................................................ P. 130
Fuels Containing Alcohol .............................. P. 131
Catalytic Converter ......................................... P. 132
20221206110820_32K2VD000_eng_BOOK Page 124 Tuesday, December 06 2022 11:12:16 JST
Keys
Information
If you lose all ignition keys and the key number,
the ignition switch and key shutter set will need
to be replaced.
Continued 121
20221206110820_32K2VD000_eng_BOOK Page 125 Tuesday, December 06 2022 11:12:16 JST
Keys
humidity.
the ID tag. You can also unlock the ignition
● Do not scratch or puncture.
switch by inputting the ID number.
● Do not store near any magnetized products
such as a magnetized key chain.
Always carry both the emergency key and ID
● Always keep the Honda SMART Key away
tag, but separate from the Honda SMART Key,
from electric appliances such as a TV, radio,
to avoid losing all of them at the same time.
PC or low-frequency massage device.
● Keep the Honda SMART Key away from
Also store a copy of your ID number in a safe
liquids. If it gets wet, dry it immediately with
place other than your vehicle.
a soft cloth.
● Keep the Honda SMART Key away from the
vehicle while washing the vehicle.
● Do not burn.
● Do not wash in an ultrasonic cleaner.
122
20221206110820_32K2VD000_eng_BOOK Page 126 Tuesday, December 06 2022 11:12:16 JST
Keys
● If fuel, wax, or grease adhere to the Honda To get an additional Honda SMART Key, take
SMART Key, wipe it off immediately to avoid the Honda SMART Key and the vehicle to your
cracking or warping. dealer.
● Do not disassemble the Honda SMART Key
other than when changing a battery. Only
the cover of the Honda SMART Key can be
disassembled. Do not disassemble other
parts.
● Do not lose your Honda SMART Key. If you
Information
lose it, you will need to register a new
Honda SMART Key. See your dealer with
your emergency key and ID tag for
registration.
Honda SMART Key ID tag
The battery in the Honda SMART Key system
normally lasts about 2 years.
123
20221206110820_32K2VD000_eng_BOOK Page 127 Tuesday, December 06 2022 11:12:16 JST
II CA type
Information
Odometer
The display remains at 999,999 when the
odometer exceeds 999,999.
Tripmeter
Each tripmeter resets to 0.0 when the trip
mileage exceeds 999.9.
124
20221206110820_32K2VD000_eng_BOOK Page 128 Tuesday, December 06 2022 11:12:16 JST
Caring for Your Vehicle 3. Thoroughly rinse your vehicle with plenty of
clean water and dry with a soft, clean cloth.
Frequent cleaning and polishing is important to 4. After the vehicle dries, lubricate any moving
ensure the life of your Honda. A clean vehicle parts.
makes it easier to spot potential problems. u Make sure that no lubricant spills onto
In particular, seawater and salts used to prevent the brakes or tyres. Brake discs, pads,
ice on roads promote the formation of drum or shoes contaminated with oil will
corrosion. Always wash your vehicle thoroughly suffer greatly reduced braking
after riding on coastal or treated roads. effectiveness and can lead to a crash.
Information
5. Apply a coat of wax to prevent corrosion.
u Avoid products that contain harsh
Washing detergents or chemical solvents. These
Allow the engine, muffler, brakes, and other can damage the metal, paint, and plastic
high-temperature parts to cool before washing. on your vehicle.
1. Rinse your vehicle thoroughly using a low Keep the wax clear of the tyres and brakes.
pressure garden hose to remove loose dirt. u If your vehicle has any mat painted parts,
2. If necessary, use a sponge or a soft towel do not apply a coat of wax to the mat
with mild cleaner to remove road grime. painted surface.
u Clean the headlight lens, panels, and
other plastic components with extra care
to avoid scratching them.
Avoid directing water into the air cleaner,
muffler, and electrical parts.
Continued 125
20221206110820_32K2VD000_eng_BOOK Page 129 Tuesday, December 06 2022 11:12:16 JST
● Do not direct water at the muffler: water or ice accumulated inside the
u Water in the muffler can prevent starting lens(es), have your vehicle inspected by
and causes rust in the muffler. your dealer.
● Dry the brakes: ● Do not use wax or polishing compounds on
u Water adversely affects braking mat painted surfaces:
effectiveness. After washing, apply the u Use a soft cloth or sponge, plenty of
brakes intermittently at low speed to water, and a mild detergent to clean mat
help dry them. painted surfaces. Dry with a soft clean
● Do not direct water under the seat: cloth.
u Water in the under seat compartment
can damage your documents and other
belongings.
126
20221206110820_32K2VD000_eng_BOOK Page 130 Tuesday, December 06 2022 11:12:16 JST
Information
Panels
Follow these guidelines to prevent scratches
and blemishes:
● Wash gently using a soft sponge and plenty
of water.
● To remove stubborn stains, use diluted
detergent and rinse thoroughly with plenty
of water.
● Avoid getting petrol, brake fluid, or
detergents on the instruments, panels, or
headlight.
127
20221206110820_32K2VD000_eng_BOOK Page 131 Tuesday, December 06 2022 11:12:16 JST
position a block so that both tyres are off Towing your vehicle with a wheel or wheels on
the ground. the ground can cause serious damage to the
● After rain, remove the body cover and allow transmission.
the vehicle to dry.
● Remove the battery (2 P. 83) to prevent
discharge. Fully charge the battery and then
place it in a shaded, well-ventilated area.
u If you leave the battery in place,
disconnect the negative - terminal to
prevent discharge.
Information
your vehicle. Avoid aerosol spray cleaners that
coolant, and cleaning solvents contain poisons
contain chlorofluorocarbons (CFCs) which
that can hurt refuse workers and contaminate
damage the atmosphere's protective ozone
drinking water, lakes, rivers, and oceans.
layer.
129
20221206110820_32K2VD000_eng_BOOK Page 133 Tuesday, December 06 2022 11:12:16 JST
Serial Numbers
Engine number
130
20221206110820_32K2VD000_eng_BOOK Page 134 Tuesday, December 06 2022 11:12:16 JST
Fuels Containing Alcohol The use of petrol containing more than 10%
ethanol may:
Some conventional fuels blended with alcohol ● Damage the painting of the fuel tank.
are available in some locales to help reduce ● Damage the rubber tubes of the fuel line.
emissions to meet clean air standards. If you ● Cause corrosion of the fuel tank.
plan to use blended fuel, check that it is ● Cause poor drivability.
unleaded and meets the minimum octane
NOTICE
rating requirement. Use of blended fuels containing higher than
approved percentages can damage metal,
Information
The following fuel blends can be used in your rubber, plastic parts of your fuel system.
vehicle:
● Ethanol (ethyl alcohol) up to 10% by volume. If you notice any undesirable operating
u Petrol containing ethanol may be symptoms or performance problems, try a
marketed under the name Gasohol. different brand of petrol.
131
20221206110820_32K2VD000_eng_BOOK Page 135 Tuesday, December 06 2022 11:12:16 JST
Catalytic Converter
132
20221206110820_32K2VD000_eng_BOOK Page 136 Tuesday, December 06 2022 11:12:16 JST
Specifications
■ Main Components Tank capacity 5.5 L (1.45 US gal, 1.21 Imp gal)
Overall length 1,921 mm (75.6 in) YTZ6V
Overall width 679 mm (26.7 in) 12V-5Ah (10 HR)
Battery
Overall height 1,064 mm (41.9 in) FTZ6V
Wheelbase 1,280 mm (50.4 in) 12V-5Ah (10 HR)
Minimum ground Primary reduction V-Matic (2.60:1-0.82:1)
133 mm (5.2 in)
clearance Final reduction 10.552
Caster angle 25º 50’
*1 : Including rider, passenger, all luggage, and accessories.
Trail 80 mm (3.1 in) *2 : Includes the weight of the luggage and added accessories.
CA type
111 kg (245 lb)
Curb weight
II CA type
Specifications
112 kg (247 lb)
Maximum weight
122 kg (269 lb)
capacity *1
Maximum luggage Luggage box 10 kg (22 lb)
weight *2 Inner rack and hook 1.5 kg (3.3 lb)
Passenger capacity Rider and 1 passenger
Minimum turning radius 1.9 m (6.23 ft)
Displacement 124.88 cm3 (7.618 cu-in)
52.400 x 57.907 mm (2.0630 x 2.2798
Bore x stroke
in)
Compression ratio 11.0:1
Fuel Unleaded petrol
Recommended: 91 RON or higher
Fuel containing alcohol ETHANOL up to 10 % by volume
133
20221206110820_32K2VD000_eng_BOOK Page 137 Tuesday, December 06 2022 11:12:16 JST
Specifications
Rear Recommended
[Driver and passenger] HONDA PRE-MIX COOLANT
coolant
225 kPa (2.25 kgf/cm2, 33 psi)
CPR7EA-9 (NGK)
Spark plug (standard)
U22EPR9 (DENSO)
Spark plug gap 0.8 - 0.9 mm (0.03 - 0.04 in)
Idle speed 1,700 ± 100 rpm
Honda 4-stroke motorcycle oil API Service
Classification SJ or higher, excluding oils
Recommended
marked as “Energy Conserving”or “Resource
engine oil
Conserving”SAE 10W-30, JASO T 903 standard
MB
134
20221206110820_32K2VD000_eng_BOOK Page 138 Tuesday, December 06 2022 11:12:16 JST
Specifications
■ Bulbs
Headlight LED
Brakelight/Taillight LED
Front turn signal LED
Rear turn signal LED
Position light LED
License plate light LED
■ Fuses
Main fuse 25 A
Other fuse 10 A, 7.5 A
Specifications
135
OM ADV160
cr@ncxhonda.com
4PK2VD00
00X4P-K2V-D000