Professional Documents
Culture Documents
Objective:
To obtain a challenging and demanding job in Interactive Design that will further enhance
my knowledge & skills.
Professional Experience:
Presently working: 13TH March 2013 to till now.
Name of company: GULF DRILLING INTERNATIONAL (GDI) Qatar
Position held: Assistant Driller (cyber chair 3000 hp Jack up)
Languages Known:
English Arabic
Personal Details:
Safety Environment
Receive instructions for drilling parameters (weight on bit, rotary table rpm, pressures
and pump outputs) as well as other work procedures (type and expected life of bit,
mud characteristics, bore control etc.), and ensure their correct application. Whenever
deemed necessary, within the specified limits, change the drilling parameters to
improve the drilling progress;
Receive handover for the previous shift and verify the status of operations and
equipment before beginning his shift;
Check and set up the equipment necessary for the assigned shift, i.e. drill pipes and
other tubular material, x-over, etc;
Operate the drawwork during drilling activities
Assist rig down/rig up operations by coordinating and controlling;
Ensure that all reporting routines are followed and that all equipment related
paperwork are carried out within his area of responsibility. Specifically he/she must:
o fill up a daily drilling report for the activities performed during his/her shift
describing the work carried out and the equipment utilized;
o Update the pipe tally book and draft dimensioned drawings of the equipment run in
the well;
Ensure that all orders and instructions received verbally or in writing are fully
understood and adhered to;
Be safety conscious in all his/her work and use compulsory protective equipment;
Responsible for safe working conditions on the drill floor at all times;
Ensure that his subordinates use compulsory protective equipment;
Be familiar with all relevant work and safety procedures issued by Company and
Operator;
Apply and ensure the correct application of prescribed safety standards and
regulations, and take part in emergency drills and safety meetings;
Issue Safe Job Analysis before start-up of non-routine operation or job and ensure
completion of risk assessments where required;
Instruct all personnel assigned to him for assistance of their duties and responsibilities
and of any special safety precaution to be taken prior to start-up of any work;
Carry out BOP and pit level drill etc. in accordance with regulations laid down by
Government Authorities or Operating Company;
Promptly report all accidents, near-miss accidents and non-conformance through the
proper channels;
Intervene promptly and opportunely in emergencies, at the same time notifying the
superior in charge;
Ensure that good housekeeping is maintained on the drill floor;