This technical drawing document provides details for a vertical stabilizer wing design with an NACA 0012 airfoil profile. The drawing was created by Jay Christian F. Leria for their CADD 211 class at Patts College of Aeronautics, and was checked by instructor Engr. Rheyniel Icaonapo. It is printed on an A3 sheet at a scale of 1:15 with measurements in millimeters.
This technical drawing document provides details for a vertical stabilizer wing design with an NACA 0012 airfoil profile. The drawing was created by Jay Christian F. Leria for their CADD 211 class at Patts College of Aeronautics, and was checked by instructor Engr. Rheyniel Icaonapo. It is printed on an A3 sheet at a scale of 1:15 with measurements in millimeters.
This technical drawing document provides details for a vertical stabilizer wing design with an NACA 0012 airfoil profile. The drawing was created by Jay Christian F. Leria for their CADD 211 class at Patts College of Aeronautics, and was checked by instructor Engr. Rheyniel Icaonapo. It is printed on an A3 sheet at a scale of 1:15 with measurements in millimeters.