Professional Documents
Culture Documents
CLIENT : SEMBCORP MARINE INTEGRATED YARD PTE LTD RFI No. : N.A.
PROJECT NAME : JOHAN CASTBERG REPORT NO : MSE-SCM-JC-PAUT-HS-016
PROJECT NO : 09J110006 ACCEPTANCE STD : BS EN ISO 19285:2016 (AL-3)
PROCEDURE NO. : C143-SC-A-KA-0013 Rev:00 REFERENCE STD. : BSEN ISO 13588: 2012
DRAWING TITLE : N.A. WELD MAP NO : H400-231-002-14
MATERIAL GRADE : Carbon Steel TYPE OF WELD : Butt Weld
DIRECTION (Long/Trans) : Transverse TESTED DATE : 31-05-2021
DIMENSIONS : Refer Annex LOCATION OF TEST : DD2
PAUT INSTRUMENT : OMNISCAN X3 SEARCH UNIT :
MAKE : RD TECH /OLYMPUS PROBE SERIAL NO : A32-U5544
MODEL : OMNISCAN-X3(PA32:128PR) MAKE : OLYMPUS
SERIAL NO. : QC-0075232 MODEL : A32
CAL DUE DATE : 17-Dec-2021 FREQUENCY : 5MHz
EQUIPMENT S/W VERSION : PA32:128PR CABLE TYPE & LENGTH : EZ LATCH TECHNOLOGY & 2.5 METER
ANALYSIS SOFTWARE : OMNI SCAN PC TOOLKIT NO. OF ELEMENTS : 64
SOFTWARE VERSION : 5.5.1 ELEMENTS PITCH : 0.5
FINAL PROCESSING DISPLAY : N.A. ELEMENT SIZE : 10mm
CALIBRATION SETUP CALIBRATION BLOCK
GROUPS : 01 02 03 CAL BLOCK NUMBER : MSE-ISO-PAUT-CAL-001
TYPE : Sectorial Linear (UBVL) Linear (BBVL) MATERIAL : Carbon steel
ANGLE RANGE : 40° ~ 72° 59° 66° REFLECTOR DETAILS : SDH (¼, & ½,)
FOCAL LAW : EQ-24, FE-38 &LE-16 EQ-26, FE-1, & LE-64 EQ-16, FE-32, &LE-64 THICKNESS : 20 MM
FOCAL DEPTH : 6 16 3 BLOCK TEMPERATURE : AMBIENT
GAIN : 17.0 dB 19.0 dB 24.9 dB SURFACE CONDITION : Coated
Has been done with manual UT using 60º
SCANNING SENSITIVITY (dB) : +6dB +6dB +6dB TRANSFER CORRECTION :
Probe, Transverse Correction dB (+4.0)
Note: EQ-Element Quantity, FE-First Element, LE-Last Element, UBVL-Upper Bevel Volume, BBVL-Bottom Bevel Volume.
SCAN DETAILS WEDGE DETAILS
SCAN PLAN ID : Annexure: A1-1 WEDGE MODEL : SA32-N55S-IHC
SCANNER : MINI WHEEL ENCODER & HSMT Scanner WEDGE ANGLE : 36.1°
ENCODER : 12 steps/mm WEDGE MATERIAL : PERSPEX
TECHNIQUE : Manual Scanning & Semi-automated RESOLUTION : 1MM
SEARCH UNIT TRAVEL SPEED : Not Exceed 150mm/sec DATA SAMPLING : 1MM
Brand : Olympus STATE : N.A.
EVALUATION & RESULT SUMMARY
Depth (mm) Maximum Height (mm)
Un-coated (PAUT)
Un-coated (PAUT)
Un-coated (TFM)
Distance from 0
Thickness(mm)
I Indication. No.
Coated (PAUT)
Coated (PAUT)
Amplitude (%)
Segment(mm)
Accept/Reject
J Joint Number
Coated (TFM)
Coated (TFM)
Length (mm)
Flaw Type
Remarks
Refer Annexure-1 & 2
SCAN PLAN NO: A1-1
Group (Sec/Lin1/Lin2)
r respect to Reference.
Indication (dB) with
Un-coated (PAUT)
Un-coated (PAUT)
Un-coated (TFM)
Distance from 0
Thickness(mm)
UT Report. No.
I Indication. No.
Coated (PAUT)
Coated (PAUT)
Joint Number
Segment(mm)
Accept/Reject
Coated (TFM)
Coated (TFM)
Length (mm)
Flaw Type
Remarks
Location
- - - - - - - - - - - - - - Sec 90 -
0-200SP1
01 106 46 - 8.9-10 - - - 1.1 - - -9 0 V (SI) Sec 270 Int.
- - - - - - - - - - - - - - Sec 90 -
0-500SP3
- - - - - - - - - - - - - - Sec 270 -
GSU-2868,08/02/2021
Refer Attachment-1
0-500SP4 - - - - - - - - - - - - - - Sec 90 -
B4-01
***
950-2000SP5 - - - - - - - - - - - - - - Sec 270 -
- - - - - - - - - - - - - - Sec 90 -
1950-3000SP5
- - - - - - - - - - - - - - Sec 270 -
- - - - - - - - - - - - - - Sec 90 -
0-300SP6
- - - - - - - - - - - - - - Sec 270 -
0-300SP7 - - - - - - - - - - - - - - Sec 90 -
0-300SP8 - - - - - - - - - - - - - - Sec 270 -
- -
- - - - - - - - - - - - - - - - - - - - -
- -
- - - - - - - - - - - - - - - - - - - - -
- - - -
- - - - - - - - - - - - - - - - - - -
- -
ACC: Acceptable, REJ: Reject, P-Planar, V-Volumetric SI – Slag Inclusion, Por – Porosity, LOF – Lack of Fusion, LOSWF – Lack of Sidewall Fusion, LOP – Lack of Penetration, CR-Crack, LORF –
Legends
Lack of Root Fusion, Int.-Intermittent, N.A.- Not Applicable, SP-Spot.
Note: 1. Evaluation Level H0-10 dB and above.
2. Recording levels are 4dB below the corresponding acceptance level.
*** PAUT Carried out to find the height sizing. Hence accept / Reject not reported.
Group (Sec/Lin1/Lin2)
r respect to Reference.
Indication (dB) with
Un-coated (PAUT)
Un-coated (PAUT)
Un-coated (TFM)
Distance from 0
Thickness(mm)
UT Report. No.
I Indication. No.
Coated (PAUT)
Coated (PAUT)
Joint Number
Segment(mm)
Accept/Reject
Coated (TFM)
Coated (TFM)
Length (mm)
Flaw Type
Remarks
Location
01 55 354* - 6.7-9.5 - - - 2.8 - - -4 -4 P (LOSWF) Sec 90 Int.
0-1300SP2
02 640 26 - 6.2-9.8 - - - 3.6 - - -2 -1 P (LORF) Sec 270 -
GSU-2868,08/02/2021
Refer Attachment-1
0-1000SP5 01 440 120 - 7.9-9.7 - - - 1.8 - - -2 -2 P (LORF) Sec 90 Int
950-2000SP5 01 1588 270 - 3.8-6.6 - - - 2.8 - - -6 1.0 V (SI) Sec 90 Int
B4-01
10
***
2950-4000SP5 01 3382 346 - 7.4-10 - - - 2.6 - - -2 -2 P (LORF) Sec 90 Int.
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
ACC: Acceptable, REJ: Reject, P-Planar, V-Volumetric SI – Slag Inclusion, Por – Porosity, LOF – Lack of Fusion, LOSWF – Lack of Sidewall Fusion, LOP – Lack of Penetration, CR-Crack, LORF –
Legends
Lack of Root Fusion, Int.-Intermittent, N.A.- Not Applicable, SP-Spot.
Note: 1. Evaluation Level H0-10 dB and above.
2. Recording levels are 4dB below the corresponding acceptance level.
* Maximum length of individual indication is < 100 mm.
*** PAUT Carried out to find the height sizing. Hence accept / Reject not reported.