• Improves adhesion of silicone • Primer for silicone adhesives and sealants sealants to many substrates • Provides more uniform and TYPICAL PROPERTIES stronger bonds Specification Writers: These values are not intended for use in preparing • Conforms to South Coast and Bay specifications. Air Quality Management District Regulations for Architectural Property Unit Result Sealant Primers Color Colorless • Low VOC at 76 g/l • Formulated for low toxicity Viscosity at 23°C (73.4°F) mPa.s 1 • OS solvent used does not deplete Flash point - closed cup °C (°F) 27 (80.6) the ozone layer. OS = Ozone Safe • Primer is suitable for VOC inclusive g/l 76 Weathersealing and Structural Specific gravity at 23°C (73.4°F) 0.84 Glazing applications
DESCRIPTION HOW TO USE
DOWSIL™ 1200 OS Primer is used to With many surfaces, substantially improve adhesion and accelerate stronger and more uniform bonds are adhesion build-up of silicone sealants obtained by preparing them with a to various substrates. This moisture primer prior to the application of the curing primer is supplied as a dilute silicone sealant. For obtaining best solution of reactive materials in low results, the following steps should be viscosity siloxane. followed on all surfaces except silicone rubber. The DOWSIL 1200 OS Primer is classified as Low-Solids Adhesive 1. Thoroughly clean and degrease Primer according to the following the surface using a 2 rag wipe regulations: Rule 1168 for Adhesives method and appropriate solvent, and Sealant Applications published on when needed. Cleaning the South Coast Air Quality procedures are defined in the Management District and Rule 8-51 Americas Technical Manual. for Organic Compounds, Adhesive Allow the surface to dry. and Sealant Products published by the Bay Area Air Quality Management 2. Apply a thin coat of DOWSIL District. The VOC Inclusive value 1200 OS Primer by applying with reported on the product label follows a clean white rag or brush. In the definitions on these regulations. most cases, a thin primer film will The VOC Exclusive value on the give best adhesion. If a white product label does not apply. chalky residue is noticed after several minutes of drying time, wipe away the chalky residue with a clean rag. 3. At normal temperatures and this product has a usable life of 18 information should not be used in humidity conditions (room months from the date of production. substitution for customer’s tests to temperature, 50% R.H.), the ensure that our products are safe, primer should be allowed to air This material must be stored in a effective, and fully satisfactory for the dry from 15 to 90 minutes. warehouse suitable for flammable intended end use. Suggestions of use Because the primer cures in materials. shall not be taken as inducements to contact to air moisture, low infringe any patent. humidity will necessitate longer Containers should be kept tightly drying time. The optimal drying sealed when not in use. The primer Dow’s sole warranty is that our time for a specific area should be hydrolyses upon contact with air products will meet the sales determined prior to use. Primer moisture, and prolonged exposure will specifications in effect at the time of which is allowed to cure reduce or destroy its effectiveness. shipment. extensively will not promote adhesion anymore. As a general Once hydrolysed, indicated by a milky Your exclusive remedy for breach of rule, drying times of more than appearance, the material cannot be such warranty is limited to refund of 6 hours at normal temperatures reclaimed, and will contaminate any purchase price or replacement of any and humidity should be avoided. unreacted primer. product shown to be other than as warranted. 4. Apply silicone sealant. PACKAGING INFORMATION TO THE FULLEST EXTENT Note: Always use buffer container PERMITTED BY APPLICABLE DOWSIL 1200 OS Primer is available when applying with a brush. To avoid LAW, DOW SPECIFICALLY in standard industrial container sizes. contamination and product DISCLAIMS ANY OTHER deactivation, do not mix used EXPRESS OR IMPLIED materials into fresh or unused primer LIMITATIONS WARRANTY OF FITNESS FOR A can. This product is neither tested nor PARTICULAR PURPOSE OR represented as suitable for medical or MERCHANTABILITY. pharmaceutical uses. HANDLING PRECAUTIONS DOW DISCLAIMS LIABILITY PRODUCT SAFETY HEALTH AND FOR ANY INCIDENTAL OR INFORMATION REQUIRED FOR ENVIRONMENTAL CONSEQUENTIAL DAMAGES. SAFE USE IS NOT INCLUDED IN INFORMATION THIS DOCUMENT. BEFORE To support customers in their product www.consumer.dow.com HANDLING, READ PRODUCT safety needs, Dow has an extensive AND SAFETY DATA SHEETS Product Stewardship organization and AND CONTAINER LABELS FOR a team of product safety and SAFE USE, PHYSICAL AND regulatory compliance specialists HEALTH HAZARD available in each area. INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE ON For further information, please see our THE DOW WEBSITE AT website, www.consumer.dow.com or WWW.CONSUMER.DOW.COM, consult your local Dow representative. OR FROM YOUR DOW SALES APPLICATION ENGINEER, OR LIMITED WARRANTY DISTRIBUTOR, OR BY CALLING INFORMATION – PLEASE DOW CUSTOMER SERVICE. READ CAREFULLY The information contained herein is USABLE LIFE AND offered in good faith and is believed to STORAGE be accurate. However, because When stored at or below 25°C (77°F) conditions and methods of use of our in the original unopened containers, products are beyond our control, this