(CHH Series) Your configured part number: CHH-MX0-63x15-KKM-P15=N250-C=28 Additional accesories: (NO ACCESSORIES)
Features and Benefits
• Cylinder Components: – Hard chrome plated steel piston rod offers high strength and maximum wear resistance – Electroless nickel plated piston and end caps provide excellent bearing surface and corrosion resistance • Cylinder Options & Custom Modifications: – Port size, type or location – Six standard rod end styles available – Custom thread lengths and styles available – Custom rod end styles available – Full stroke position sensing options are available
Engineering Specifications Service and Design Capabilities
Pressure Rating: 206 Bar (3000 PSI) • Most cylinders ship in 10 to 12 days Temperature Range: -23° C (-10° F) to 100° C (212° F)1 • RUSH Service available for most products Materials: • Made-to-order custom design capabilities for your Rod Bearing: Electroless Nickel Plated Ductile Cast Iron needs Piston Rod: Hard Chrome Plated Steel • Six bore sizes available: 25mm to 76mm Head & Cap: Electroless Nickel Plated Ductile Cast Iron (0.98” to 3.00”) Piston Seals: Polyurethane with Nitrile Energizer • Strokes up to 100mm (3.93”) Rod Seal: Polyurethane1 • Seven different mounts to choose from Rod Wiper: Urethane Cylinder Tube: Steel, Honed and Work-Hardened
1 Depending on Bore Size
Bimba Manufacturing Company
Monee, IL 60449-0068 Telephone: 708.534.8544 Toll Free: 800-44-BIMBA Leaders in Actuation. Email: cs@bimba.com www.bimba.com
Powered by CADENAS PARTsolutions 1
CHH-MX0-63x15-KKM-P15=N250-C=28 (NO ACCESSORIES) Bimba Manufacturing Co. Monee, IL. 60449 THIS DRAWING CONTAINS PROPRIETARY DESIGNS AND/OR INFORMATION OF BIMBA MFG. CO. OR ITS SUBSIDIARIES AND IS NOT TO (800) 442-4622 www.bimba.com BE TRANSMITTED, REPRODUCED, USED OR DISCLOSED WITHOUT WRITTEN PERMISSION OF BIMBA MFG. CO. OR ITS SUBSIDIARIES. DESIGN REFLECTS OUR BEST ENGINEERING OPINION BASED ON WRITTEN APPLICATION SPECIFICATIONS RECEIVED. SUITABILITY OF PROPRIETARY DRAWING - Reference Only A DESIGN FOR AN APPLICATION REQUIRES ANALYSIS AND/OR TESTS IN YOUR SPECIFIC SYSTEM.