You are on page 1of 25



Example 1: Convert 20 minutes to seconds
Solution:
Step 1: Create the conversion factor(s) using the conversion table.
A conversion factor is a fraction with the given unit and the unknown unit. If the given unit is located
in the numerator of the given quantity, the similar unit will be located in the denominator of the
conversion factor, and vice versa. Hence,
Given: 15 min numerator
Conversion from Table 3: 1 s = 0.016666666 min denominator
Conversion factor: 1s
0.016666666 min
Step 2: Multiply the given quantity by the conversion factor(s). The product should contain the target
unit.
(15 min) ( 0.016666666 min
1s ( = 900.000036 s
Factor-Label Method of Unit
• Example: Convert
Conversion 5km to m:
• Multiply the original measurement by a
conversion factor.

NEW UNIT
85km x 1,000m = 85,000m
1km
OLD UNIT
Factor-Label Method of Unit
Conversion: Example

•Example: Convert 789m to km:

789m x 1km =0.789km= -1


7.89x10 km
1000m
Convert 75.00 km/h to m/s

75.00 km x 1000 m x 1 h___ = 20.83m/s


h 1 km 3600 s
• Measurement is simply a comparison with a standard. To carry out

• Physical quantities may either be


You might also like