Professional Documents
Culture Documents
Cable Academy
Search by product name, description Account
(/blogs/cable-
(/account/login)
academy/)
(https://www.truecable.com)
(/collections/buy-
Ethernet RJ45 Keystone(/collections/keystone- Patch (https://www.truecable.com/collection
ethernet-cable- (/collections/connectors)
Cable Connectors Jacks jacks) Panelspanels)
online)
Recent Posts
for Success
Written by Don Schultz, trueCABLE Technical Manager, Fluke Networks Copper/Fiber CCTT, BICSI INST1, INSTC, INSTF Certified
Consider this situation: An installer runs 290 feet of solid copper Ethernet cable and dutifully punches down both ends of the
cable into patch panels and/or keystone jacks. The installer then plugs in some stranded copper patch cords at both ends,
both totalling about 30 feet and turns the equipment on. The speeds are not what is expected and there is severe packet loss.
What’s worse is the cable system does not seem to work well in the afternoons. On very hot days, it does not work at all. The next
morning everything seems OK. What the heck is going on? Isn’t 328 feet (100 meters) the magic number? The answer is Aug 17, 2023
sometimes “no”. It all depends on the installation. Please note the video is a short demonstration. The written blog that follows Q&A: Is Cheap Ethernet C
is far more detailed and gives actual calculation tables. OK to Use? What is "Che
(/blogs/cable-academy
is-cheap-ethernet-cabl
to-use-what-is-cheap)
Rewards
How To: Calculating Ethernet Channel Length Popular Tags
10G (/BLOGS/CABLE-
ACADEMY/TAGGED/10G)
1G (/BLOGS/CABLE-
ACADEMY/TAGGED/1G)
5G (/BLOGS/CABLE-
ACADEMY/TAGGED/5G)
ACCESSORIES (/BLOGS/CABLE-
ACADEMY/TAGGED/ACCESSORI
ANEXT (/BLOGS/CABLE-
ACADEMY/TAGGED/ANEXT)
BICSI (/BLOGS/CABLE-
ACADEMY/TAGGED/BICSI)
How temperature can affect the length of your permanent link and therefore the overall channel length CAT6 (/BLOGS/CABLE-
Example calculation of a properly constructed overall channel ACADEMY/TAGGED/CAT6)
CAT6A (/BLOGS/CABLE-
What makes up an overall channel and what are the components? ACADEMY/TAGGED/CAT6A)
CAT7 (/BLOGS/CABLE-
If you are an experienced installer and frequently work with business communications cable installations, this concept will not ACADEMY/TAGGED/CAT7)
be new to you. Traditional channels are comprised of:
CCA (/BLOGS/CABLE-
ACADEMY/TAGGED/CCA)
Solid copper Ethernet cable (Cat5e, Cat6, Cat6A, for example)
The solid copper Ethernet cable is terminated at both ends to IDC (insulation displacement contact) terminations such as CERTIFICATIONS (/BLOGS/CABL
ACADEMY/TAGGED/CERTIFICAT
patch panels and/or keystone jacks. This provides female ports on both ends. The result is a permanent link.
The permanent link is then patched into with patch cords at both ends. An example would be a short patch cord in your CMP (/BLOGS/CABLE-
ACADEMY/TAGGED/CMP)
telecommunications room to patch your switch into your patch panel and then on the other end a longer patch cable to
plug a computer into a wall outlet. CMR (/BLOGS/CABLE-
ACADEMY/TAGGED/CMR)
The overall Ethernet channel ends up with male plugs on both sides when the patch cords are plugged in
CMX (/BLOGS/CABLE-
There are slight variations upon this theme, but the key item is IDC terminations and patch cords are used somewhere in this
ACADEMY/TAGGED/CMX)
overall channel.
COAX (/BLOGS/CABLE-
ACADEMY/TAGGED/COAX)
CONNECTOR (/BLOGS/CABLE-
ACADEMY/TAGGED/CONNECTO
COPPER (/BLOGS/CABLE-
ACADEMY/TAGGED/COPPER)
COUPLERS (/BLOGS/CABLE-
ACADEMY/TAGGED/COUPLERS)
DON'T DO (/BLOGS/CABLE-
There can be variations that exceed the rules, but they require very thick 22 AWG conductors and trade-offs in your expected ACADEMY/TAGGED/DONT-DO)
speeds. There are specialty “Ethernet” cables designed to carry data reliably at longer distances, subject to limitations. To see
ETHERNET CABLE (/BLOGS/CABL
more on this, please read Breaking the law! Violating Ethernet Cable 328 Foot Length Limitations. ACADEMY/TAGGED/ETHERNET-C
(https://www.truecable.com/blogs/cable-academy/breaking-the-law-violating-ethernet-cable-328-foot-length-limitations)
FIBER OPTIC (/BLOGS/CABLE-
Myth debunked: Many novice installers are under the impression that higher Category rating will provide “more ACADEMY/TAGGED/FIBER-OPTIC
How long can permanent links and channels be and how are they related? FLUKE (/BLOGS/CABLE-
ACADEMY/TAGGED/FLUKE)
No doubt you have heard by now this statement: “Ethernet cable can be 328 feet long”. Please get that phrase out of your
FTP (/BLOGS/CABLE-
vocabulary. It is misleading and only tells 10% of the story. The correct way of wording that phrase is: ACADEMY/TAGGED/FTP)
“Copper twisted pair Ethernet cable channels, under ideal conditions and within certain limitations, may reach 328 feet GEL FILLED DIRECT BURIAL
maximum.” (/BLOGS/CABLE-
ACADEMY/TAGGED/GEL-FILLED-
BURIAL)
Here are the actual guidelines from the standard to reach this maximum limit:
HOW TO (/BLOGS/CABLE-
The permanent link must be constructed of 22 to 24 AWG solid copper conductors. Category is not relevant. ACADEMY/TAGGED/HOW-TO)
The two patch cords must be constructed of 24 AWG stranded copper conductors
The solid copper permanent link has a maximum length of 295 feet at 68 ℉ HOW-TO (/BLOGS/CABLE-
ACADEMY/TAGGED/HOW-TO)
Each patch cord may be up to 16.5 feet long
IDC (/BLOGS/CABLE-
In totality, under the above conditions and circumstances, you achieve 328 feet. This means up to 295 feet of solid copper
ACADEMY/TAGGED/IDC)
cable and up to 33 feet (total) of stranded copper patch cord.
INDUSTRY TRENDS (/BLOGS/CAB
As far as relationship between the channel and permanent link, the permanent link is part of the channel and is the ACADEMY/TAGGED/INDUSTRY-T
permanently installed cable. Permanent links are the solid copper portion running inside walls and above your ceilings (or
INTERNET (/BLOGS/CABLE-
below your floors) that end up at patch panels and keystone jacks (called drops). Once you have plugged in two patch cords ACADEMY/TAGGED/INTERNET)
on either side of the permanent link you have created the overall channel. Keep these criteria in mind:
IOT (/BLOGS/CABLE-
ACADEMY/TAGGED/IOT)
ALL channels always end up with two 8P8C (aka RJ45) style connectors at both ends. This includes your typical “RJ45”
modular plug or it might be a field termination plug as well. KEYSTONE (/BLOGS/CABLE-
ACADEMY/TAGGED/KEYSTONE)
Permanent links end up in female ports on both ends and are effectively useless until you create your overall channel by
plugging in patch cords LAN (/BLOGS/CABLE-
ACADEMY/TAGGED/LAN)
As you might have noticed above, there were some caveats around patch cords. You may have noticed that I pointed out 24 LOW VOLTAGE LOW DOWN
AWG and 16.5 feet very specifically. There is a reason for that! As patch cords are constructed from stranded copper conductors (/BLOGS/CABLE-
ACADEMY/TAGGED/LOW-VOLTA
they have far more attenuation (also called signal loss) associated with them. This attenuation gets more severe as the patch LOW-DOWN)
cord copper conductor gauge gets thinner. Therefore, a 26 AWG patch cord has more signal loss than a 24 AWG patch cord. If
LSZH (/BLOGS/CABLE-
the difference between solid and stranded copper conductors confuses you, please read Solid vs. Stranded Ethernet Cable. ACADEMY/TAGGED/LSZH)
(https://www.truecable.com/blogs/cable-academy/solid-vs-stranded-ethernet-cable)
MESH (/BLOGS/CABLE-
ACADEMY/TAGGED/MESH)
Is there a chart that shows just how long patch cords can be in various circumstances? Yup, there sure is. You will need to get
MESSENGER WIRE (/BLOGS/CAB
familiar with the concept of “de-rating”:
ACADEMY/TAGGED/MESSENGER
MOCA (/BLOGS/CABLE-
ACADEMY/TAGGED/MOCA)
NBASE-T (/BLOGS/CABLE-
ACADEMY/TAGGED/NBASE-T)
NETWORKING (/BLOGS/CABLE-
ACADEMY/TAGGED/NETWORKIN
OUTDOOR (/BLOGS/CABLE-
ACADEMY/TAGGED/OUTDOOR)
PLENUM (/BLOGS/CABLE-
ACADEMY/TAGGED/PLENUM)
POE (/BLOGS/CABLE-
ACADEMY/TAGGED/POE)
Q&A (/BLOGS/CABLE-
ACADEMY/TAGGED/Q-A)
RG6 (/BLOGS/CABLE-
ACADEMY/TAGGED/RG6)
RISER (/BLOGS/CABLE-
ACADEMY/TAGGED/RISER)
RJ45 (/BLOGS/CABLE-
ACADEMY/TAGGED/RJ45)
ROHS (/BLOGS/CABLE-
ACADEMY/TAGGED/ROHS)
Total Channel Length With Patch Cord De-Ratings. Image Courtesy of ANSI/TIA-568.0-E SHIELDED (/BLOGS/CABLE-
ACADEMY/TAGGED/SHIELDED)
Notes on using this table:
SHIELDED KEYSTONE JACK
D = De-rating factor applied using an equation, so… (/BLOGS/CABLE-
ACADEMY/TAGGED/SHIELDED-
D=1.0 means solid copper is used for the patch cord, no de-rating KEYSTONE-JACK)
D=1.2 means 24 AWG stranded copper patch cord
SLIP-ON BOOTS (/BLOGS/CABLE
D=1.5 means 26 AWG stranded copper patch cord ACADEMY/TAGGED/SLIP-ON-BO
D=1.95 means 28 AWG stranded copper patch cord
SOLID (/BLOGS/CABLE-
Link = permanent link length ACADEMY/TAGGED/SOLID)
could get away with 223 feet maximum, and that would be in indoor temperatures. That is not 328 feet! TOOLS (/BLOGS/CABLE-
ACADEMY/TAGGED/TOOLS)
How temperature can affect the length of your permanent link and therefore TRUECABLE NEWS (/BLOGS/CAB
ACADEMY/TAGGED/TRUECABLE
the overall channel length
UNSHIELDED (/BLOGS/CABLE-
ACADEMY/TAGGED/UNSHIELDED
You may have noticed I keep referencing ambient temperature. One may assume that is potentially a big deal in how long your
Ethernet cable can run. If you assumed that, you assumed right. Temperature can become a severely limiting factor and cause UTP (/BLOGS/CABLE-
ACADEMY/TAGGED/UTP)
you to change your strategy such as inserting an intermediate switch somewhere along your overall channel. It has certainly
happened to me! VIDEO (/BLOGS/CABLE-
ACADEMY/TAGGED/VIDEO)
The higher the ambient temperature the shorter your permitted lengths are WATERPROOF TAPE (/BLOGS/CA
ACADEMY/TAGGED/WATERPROO
Higher temperatures increase signal loss (called Insertion Loss) because that is how copper behaves
Indoor installations that have ambient temperatures in the 68 to 72 ℉ range are not really subject to this phenomenon
ANY outdoor installation is absolutely subject to this phenomenon
ANY indoor industrial installation (factory, indoor farms, etc.) that experience higher heat levels are subject to this WHITE PAPER (/BLOGS/CABLE-
ACADEMY/TAGGED/WHITE-PAP
phenomenon
WIFI (/BLOGS/CABLE-
ACADEMY/TAGGED/WIFI)
Is there a chart for that? Of course! I wrote a detailed blog about Temperature's Effect on Ethernet Cable Length.
(https://www.truecable.com/blogs/cable-academy/temperatures-effect-on-ethernet-cable-length) It is strongly
recommended you read it if you are expecting your installation to be subject to temperatures exceeding 72 . ℉
Here is a partial screenshot of the temperature table found in that blog which illustrates this:
Read this chart with the patch cord de-rating factors in mind too! The overall channel lengths listed above are predicated on
24 AWG patch cord. You are not getting the whole picture unless you combine the two charts together.
It just so happens that shielded Ethernet cable can mitigate this issue to some extent. Be careful, however. Shielded cable drives
up installation costs and complexity to a point that inserting intermediate Ethernet “dumb” switches (AC or PoE powered)
somewhere in the overall channel might make much more sense and cost less.
My recommendation is to use shielded Ethernet cable to avoid issues revolving EMI/RFI/ESD and don’t attempt to use shielded
cable to avoid higher temperature length issues.
Joe took a look at his climate data for his region and found out that the outdoor portion of his installation will be subjected to a
℉
worst case scenario ambient temperature of 107 . The longest cable run will be 230 feet from patch panel to camera.
Joe further plans to use 28 AWG Cat6 patch cords at the patch panel end found in his office. The longest patch cord he will
need is 5 feet. The patch panel end of the solid copper Ethernet cables will be punched into keystone jacks and mounted in a
tool-less patch panel frame. The jacks are Cat6 rated. The other end of the overall channel will be directly terminated to a
8P8C (aka RJ45) connector to plug directly into the camera, so a second patch cord will not be required. This is known as a
MPTL link (Modular Plug Terminated Link) and is commonly used for PoE devices. It will be treated identically to a permanent link.
Will this work? Let’s find out:
Joe is using solid copper Ethernet cable for his link, so he has potential access to all 295 feet allowed subject to temperature.
His maximum worst case scenario temperature is 107 ℉ so his maximum link length is 269 feet. Joe stated his longest run is 230
feet, so he is fine in regards to temperature.
Joe intends to use 28 AWG patch cords. Looking at the patch cord de-rating chart we get…
As you can see, he has the ability to use 49 feet. That far exceeds his requirement of 5 feet. Joe is good on patch cord length
too!
Joe can now install his structured cabling system without fear of intermittent reliability (assuming he follows all the other rules
around termination and running Ethernet cable!). By following these guidelines Joe also won’t need to worry about his cameras
fritzing out on him during the hot summer months.
So, there you have it. By now you can see the discussion of how far copper twisted pair Ethernet cable can run is much more
complicated than you might think. The key is being prepared with the correct knowledge. Given the amount of misinformation
found on-line (most of it well intentioned) getting the details right when it comes to a reliable install. Nobody wants cameras
that blink on and off randomly or blur, right? With that in mind, I will say…
HAPPY NETWORKING!
trueCABLE presents the information on our website, including the “Cable Academy” blog and
live chat support, as a service to our customers and other visitors to our website subject to our
website terms and conditions. (https://www.truecable.com/pages/terms-and-
conditions) While the information on this website is about data networking and electrical issues,
it is not professional advice and any reliance on such material is at your own risk.
Please sign in to your trueCABLE account to leave a comment
Sign Up Sign In
Follow us on Instagram
(https://www.instagram.com/ree(https://www.instagram.com/p/(https://www.instagram.com/ree(https://www.instagram.com/p/
(https://www.instagram.com/ree(https://www.instagram.com/p/(https://www.instagram.com/ree(https://www.instagram.com/p/
DAYPIsep/)
Load more
Rewards
(https://www.truecable.c
Headquarters
Kansas City, 800.719.8277
MO info@truecable.com
(https://www.facebook.com/truecableinc/) (https://www.instagram.com/truecableinc/) (https://
© Copyright trueCABLE Inc. All Rights Terms and Conditions (/pages/terms-and-conditions) Privacy Policy (/pages/privacy-policy)
Reserved. Site Map (https://www.truecable.com/apps/sitemap)
(https://www.shopify.com/security/pci-compliant?
utm_source=secure&utm_medium=shop)