Professional Documents
Culture Documents
EVT-25
4-20 mA Vibration Transmitter
Main Characteristics
• Low Cost velocity transmitter with limited bandwidth 10 Hz to
1000 Hz. Can monitor machine as low as 500 RPM.
• Low Cost MEMs technology with limited 40 g peak dynamic range.
• Hermetic sealing with M12 glass seal connector
• ISO 10816 (or new ISO 20816) compliant.
Competitive Advantage
• Price
• Resistant to shock (magnet mounting)
• ESD and reverse wiring protection.
• The glass seal hermetic connector protects the electronic from harmful environmental influences,
significantly increasing their reliability and lifetime.
• M12 connector (4-Pin) offers compatibility with numerous sensors used in automation.
Description
The 4-20 mA loop powered industrial accelerometer model EVT-25 is designed to monitor the
vibration in harsh industrial environment. It uses the industry standard 2-wire 4-20mA Loop that
interfaces directly with PLC, DCS and 4-20mA monitor. Its compact size allows for installation in
tight places.
Typical Applications
Vibrations measurement in the rugged environments of industrial machinery monitoring. It allows
continuous trending of overall machine vibration.
Approvals
Specifications
Dynamic
Measurement Range 0 to 25 mm/s RMS
Dynamic Range 40 g
Sensitivity
No vibration 4 mA ±5%
Full scale 20 mA ±5%
Transverse response sensitivity (20Hz, 5g) <5%
Linearity ±1% Max
Frequency Response 10 … 1000 Hz, ±30%
Turn on time, 4-20 mA loop < 10 Sec
Connector M12 glass seal, IEC 60947-5-2
Housing Thread M6x1
Electrical
Electrical Grounding Isolated from machine ground
Isolation(Case to shield) 100 MΩ, min
Maximum Loop resistance Rl Max=(Vdc power - 10V) / 20mA
Minimum Rl wattage Watt min=0.0004xRl
Power requirements for two wire loop Voltage +10 … +30 VDC
Protection
Overvoltage Yes
Reverse polarity Yes
ESD Protection > 40 V
Environmental
Temperature, operating continuous
max. loop current =10mA -55 … 120 °C
max. loop current =20mA -55 … 90 °C
Humidity, enclosure Glass seal, Not affected, hermetically sealed, 1E-8 torr.l/s
Acceleration Limit
Shock 2500 g peak
Continuous 500 g peak
Physical
Weight 70 gr nom.
Material AISI 316L, DIN 1.4404 (Stainless steel)
Mounting torque 2.4 Nm
European Directive
EMC Directive 2014/30/EU
Standards 61326-1
RoHS Directive 2011/65/EU
Certificate 101.51-YN_Rohs2
Pin 1 : (+)
Pin 2 : (-)