This document provides a checklist for intermediate maintenance of a double ram preventer. It lists 10 items to check, including the sealing surfaces of the shell, ram chamber, and side door for defects; the eccentric wear in the shell's vertical through hole; the condition of the ram rubber core; connections between the ram body and shaft; and other components for cracks, bending, wear, or other defects that could compromise sealing performance. Upon completion of the checks, the toolpusher signs off to accept the condition of the equipment.
This document provides a checklist for intermediate maintenance of a double ram preventer. It lists 10 items to check, including the sealing surfaces of the shell, ram chamber, and side door for defects; the eccentric wear in the shell's vertical through hole; the condition of the ram rubber core; connections between the ram body and shaft; and other components for cracks, bending, wear, or other defects that could compromise sealing performance. Upon completion of the checks, the toolpusher signs off to accept the condition of the equipment.
This document provides a checklist for intermediate maintenance of a double ram preventer. It lists 10 items to check, including the sealing surfaces of the shell, ram chamber, and side door for defects; the eccentric wear in the shell's vertical through hole; the condition of the ram rubber core; connections between the ram body and shaft; and other components for cracks, bending, wear, or other defects that could compromise sealing performance. Upon completion of the checks, the toolpusher signs off to accept the condition of the equipment.
1 ring, side door plane, side door sealing ring, groove and stop ring, and no defects affecting the sealing performance are allowed.
Check the eccentric wear of the cylindrical surface
in the vertical through hole of the shell, and the 2 eccentric wear in any radius direction is not allowed to exceed 3mm.
Check the working face of ram rubber core, no
3 wear, tear, degumming, serious deformation, aging and other defects are allowed.
Check the connecting groove between the ram
body and the ram shaft to ensure that there is no 4 crack or bending deformation; the width and height of the ram body are not allowed to have serious wear and deformation.
Check the locking rod, no crack, bending, groove,
5 locking shaft switch should be flexible.
Check all threaded holes, and do not allow
6 disorderly or missing thread.
Visually check whether there are cracks in the ram