Professional Documents
Culture Documents
Select one:
a. networks reachable outside the local area
b. networks reachable outside the OSPF domain
c. the route to reach an ASBR
d. the router ID of the DR
Question 2
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Which LSA type advertises directly connected OSPF-enabled links to other OSPF
routers within the OSPF area they originated?
Select one:
a. type 3
b. type 2
c. type 1
d. type 4
Question 3
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Use the show ip ospf database command to verify the contents of the OSPFv2
LSDB.
Select one:
True
False
Question 4
Complete
Mark 1.00 out of 1.00
Flag question
Question text
LSA type 2 identifying the routers and the network address of the multiaccess
link
Select one:
True
False
Question 5
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 6
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 7
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 8
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Which LSA type is flooded by a designated router to other OSPF routers within
the same area?
Select one:
a. type 4
b. type 2
c. type 3
d. type 1
Question 9
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 10
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 11
Complete
Mark 1.00 out of 1.00
Flag question
Question text
An OSPF router has received type 3 summary LSAs that were flooded into an
area. How are these LSAs identified in the routing table?
Select one:
a. O E2
b. O
c. O E1
d. O IA
Question 12
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Use the show ip ospf interface brief command to display concise OSPFv2-
related information of OSPFv2-enabled interfaces.
Select one:
True
False
Question 13
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Which type of routing table entry would indicate that an external route was
redistributed into the multiarea OSPF process?
Select one:
a. O
b. O IA
c. S
d. O E2
e. C
Question 14
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 15
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Area Border Router (ABR) s is a router that has interfaces attached to multiple
areas
Select one:
True
False
Question 16
Complete
Mark 1.00 out of 1.00
Flag question
Question text
What must all non-backbone OSPF areas connect to when deploying multiarea
OSPF?
Select one:
a. Area 0
b. an ASBR
c. a DR
d. Area 1
Question 17
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 18
Complete
Mark 0.00 out of 1.00
Flag question
Question text
Internal router is a router that has all of its interfaces in the same area.
Select one:
True
False
Question 19
Complete
Mark 1.00 out of 1.00
Flag question
Question text
LSA type 1 including a list of directly attached network prefixes and link type
Select one:
True
False
Question 20
Complete
Mark 0.00 out of 1.00
Flag question
Question text
An ABR in a multiarea OSPF network receives LSAs from its neighbor that
identify the neighbor as an ASBR with learned external networks from the
Internet. Which LSA type would the ABR send to other areas to identify the
ASBR, so that internal traffic that is destined for the Internet will be sent through
the ASBR?
Select one:
a. LSA type 1
b. LSA type 3
c. LSA type 5
d. LSA type 4
e. LSA type 2
DR/BDR elections only occur in point-topoint networks and do not occur in
multiaccessnetworks.
Select one:
True
False
Question 2
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 3
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The show ip ospf neighbor command is use to verify if routers form adjacentcy.
Select one:
True
False
Question 4
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Which state will OSPF routers transition to when they have converged?
Select one:
a. Full
b. ExStart
c. Init
d. Loading
Question 5
Complete
Mark 1.00 out of 1.00
Flag question
Question text
show ip protocols
Answer Used to verify vital OSPFv2 configuration information,
including the OSPFv2 process ID, the router ID, networks the router
is advertising, the neighbors the router is receiving updates from, and the
default administrative distance, which is 110 for OSPF.
Question 6
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The show ip ospf interface command use to verify active RIP interfaces.
Select one:
True
False
Question 7
Complete
Mark 1.00 out of 1.00
Flag question
Question text
default-information originate
The Answer command is used when configuring an OSPFv2
router to redistribute only a static default route.
Question 8
Complete
Mark 1.00 out of 1.00
Flag question
Question text
A BDR is also elected in case the DR fails. If the DR stops producing Hello
packets, the BDR promotes itself and assumes the role of DR.
Select one:
True
False
Question 9
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 10
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Which configuration will prevent two directly connected Cisco routers from
forming an OSPFv2 neighbor adjacency?
Select one:
a. Configuring mismatched MTU values on two adjacent routers
b. Configuring a router ID on two adjacent routers
c. Configuring mismatched OSPF process IDs on two adjacent routers
d. Configuring a LAN interface connected to a switch as a passive interface
Question 11
Complete
Mark 0.00 out of 1.00
Flag question
Question text
Question 12
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 13
Complete
Mark 0.00 out of 1.00
Flag question
Question text
The the show ip interface brief command use to verify that interfaces are active.
Select one:
True
False
Question 14
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The OSPF Hello and Dead intervals are configurable on a per-interface basis.
Select one:
True
False
Question 15
Complete
Mark 1.00 out of 1.00
Flag question
Question text
The show ip route ospf command use to verify the routing table.
Select one:
True
False
Question 16
Complete
Mark 1.00 out of 1.00
Flag question
Question text
show ip ospf
Answer Used to examine the OSPFv2 process ID and router ID.
Question 17
Complete
Mark 0.00 out of 1.00
Flag question
Question text
If a specific router ID is not configured on an IPv4-based OSPF router, what will
the IOS look for next to determine the router ID?
Select one:
a. the lowest IPv4 address on any enabled interface
b. the highest MAC address on any enabled interface
c. the highest IPv4 address on a loopback interface
d. the highest MAC address on a loopback interface
Question 18
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Link
A virtual Answer is a special OSPF transit area that is used to
connect a remote OSPF network to Area 0.
Question 19
Complete
Mark 1.00 out of 1.00
Flag question
Question text
Question 20
Complete
Mark 1.00 out of 1.00
Flag question
Question text
All other non-DR or BDR routers become DROTHER (a router that is neither the
DR nor the BDR) and DROTHERs only form full adjacencies with the DR and BDR
in the network.
Select one:
True
False
Autonomous System Boundary Router (ASBR) is a router that has at least
one interface attached to an external internetwork.